Availability
Showing In Stock Items. Show All 24 Items.
Clevite H-Series rod bearings were developed primarily for use in NASCAR type racing but are suitable for all types of competition engines. These H-Series bearings have a medium level of eccentricity, high crush factor, and have hardened steel backs and thin overlays. They also have enlarged chamfers for greater crankshaft fillet clearance and are made without flash plating for better seating. Bearings with .001 in. extra clearance are available for standard size shafts and with or without dowel holes. H-Series bearings are recommended for use with crankshafts that have oversize fillets and where engines run in the medium to high rpm range. They should also be used if contact patterns obtained with Clevite P-Series bearings are too narrow. Contact patterns should ideally cover 2/3 to 3/4 of the bearing surface.
( 163 )
$23.99
ACL Performance offers Race Series rod bearing sets for a wide range of vehicles. These high performance tri-metal engine bearings are designed to withstand higher RPM conditions. They feature a high-strength overlay plate with reduced thickness for improved fatigue properties. Select the crankshaft undersize and quantity recommended for your year/make and engine application. Additional details: * Hardened steel backs on all rod bearings to improve the support of the bearing lining and assist with bearing retention in the housing. * Increased crush for improved bearing retention * Elimination of flash plating on the back of the bearings to improve heat transfer through the bearings and to maximize the grip between the bearings and its housing * Increased eccentricity to compensate for bore distortion at high RPM and to assist in the formation of hydrodynamic oil films * 3/4 in. grooved main bearings to optimize bearing load carrying surface area and oil flow to the conrod bearings * Tight consistent wall tolerances to help you maintain consistent clearances * Enlarged ID chamfers on bearing edges (where required) to accommodate large fillet radius on performance crankshafts
( 8 )
$44.99
—
$52.99
Give your engine the winning edge with King XP-Series coated rod bearings. Built off the revolutionary XP-Series tri-metal construction, King's factory-applied pMaxKote nano-composite coating takes protection to the next level without adding any additional thickness! These high performance race bearing sets are available for fitment on a wide range of specific vehicle applications. pMaxKote provides: * Superior seizure resistance * Superior cavitation resistance * Superior wear resistance * Superior protection against oil starvation
( 10 )
$51.99
—
$71.99
King XP-Series rod bearings feature advanced metallurgical and geometric technologies that meet extreme performance loads. They were developed for all performance applications that use forged steel aftermarket crankshafts and produce high loads for extended periods. King focuses on one product—bearings—and nothing else. Their innovative race-only Xtreme Performance Max Black Tri-Metal rod bearings have a 24 percent stronger overlay and 17 percent more fatigue strength by using a micro process called SecureBond. Built with enhanced tri-metal, King XP-Series rod bearings layer copper-lead construction with a nickel plate barrier and a lead/tin/copper Babbitt overlay over a steel backing in an adhesion process that provides superior stability and durability. King's advanced control measures hit a bull's-eye, maintaining wall thickness tolerances far tighter than their competitors—at an amazing +/- .0001 in.! XP-Series rod bearings are narrowed on the crank cheek side with increased crush height for improved bearing-to-bore contact, heat transfer, and reduced spin potential in high-rpm applications.
( 68 )
$43.99
—
$54.99
King SI-Series rod bearings are recommended for OE applications. They're designed for aftermarket gasoline or diesel engine rebuilding and performance engines with OE crankshafts. These direct replacements have an improved finish for reducing microscopic ferrite peaks on improperly ground or polished nodular cast iron crankshafts. King SI-Series rod bearings also feature improved oil clearance to reduce wear and increase engine life—which, in turn, lessens operating noise, vibration, and excess oil flow. Hundreds of sets are available; order the bearings recommended for your vehicle.
( 94 )
$34.99
—
$36.99
Summit Racing™ offers Race Series main bearing sets for a wide range of applications—including many Chevrolet, Ford, Chrysler, Dodge, Jeep, Ram small block, big block, and Hemi engines from the early 1960s and up. Main bearings hold the crankshaft in place and allow it to rotate within the engine block. These performance replacements are machined from tri-metal copper-lead alloy, and are available in numerous upper/lower groove styles and engine crankshaft undersize options. Order the set recommended for your vehicle.
( 4 )
$44.99
—
$49.99
On Sale
These Wiseco crank pin bearings feature the latest caged needle roller bearing design for maximum durability. They are available for either the crank or rod end of the connecting rod. The bearings are manufactured from the highest quality hot rolled steel that's case-hardened to 58-62 RC to extend the life of the assembly. The Wiseco crank pin bearings' unique design provides the best possible performance and highest possible rpm.
Not Yet Reviewed
$26.99
$24.29
On Sale
Wiseco main bearings are manufactured and engineered to the highest quality standards. These bearings are case-hardened to provide maximum life and smooth operation at high rpm. Wiseco main bearings are an excellent choice for bottom-end performance.
Not Yet Reviewed
$26.99
—
$62.99
$24.29
—
$56.69
King AM-Series rod bearings are recommended for street or marine applications. They have superior embeddability, which provides greater macro-particle and reduces scratching of the crank journals and tearing or weakening of the Babbitt overlays. The direct replacements feature tolerance control up to +/- .0001—and they're lead-free, making them environmentally friendly and user-safe. Order the King AM-Series rod bearings in the application designed for proper fitment with your vehicle.
( 28 )
$24.99
—
$37.99
Clearance
King SI-Series main bearings are recommended for OE applications. These replacement bearings are designed for aftermarket gasoline or diesel engine rebuilding—and performance engines with factory crankshafts. The bearings have an improved crankshaft finish for reducing microscopic ferrite peaks on improperly ground or polished nodular cast iron crankshafts. King SI-Series main bearings feature improved oil clearance to reduce wear and increase engine life, which in turn reduces operating noise, vibration, and excess oil flow. Order the bearing set designed for fitment on your make and model.
( 83 )
$43.99
—
$50.99
These All Balls Racing crankshaft bearing and seal kits contain right side and left side crankshaft bearings and seals, depending on your application. These crankshaft bearings feature Koyo and Nachi bearings (precision Japanese crank bearings). All Balls Racing crankshaft seals are designed with a carbon/fluorocarbon sealing lip to reduce "dry start" friction and crank pin wear. All Balls Racing crankshaft bearings and seal kits include all of the parts needed to do the job right!
( 1 )
$35.44
—
$47.03
King AM-Series main bearings are recommended for street or marine applications. These crankshaft bearings have superior embeddability, which provides greater macro-particle to reduce scratching of the crank journals and tearing or weakening of the Babbitt overlays. King AM-Series main bearings feature tolerance control to within plus or minus .0001—and they're lead-free, making them environmentally-friendly and user-safe. Hundreds of performance sets are available; order the replacement bearings designed to fit your vehicle.
( 32 )
$25.99
—
$32.99
For high load applications, King SM-Series rod bearings contain the strongest aluminum-based material offered by King. The alloy is strengthened by the addition of manganese and chromium. King SM-Series connecting rod bearings feature a traditional steel-backing, plus an aluminum bonding layer and the aluminum bearing alloy. These replacement sets are available for a variety of vehicle applications.
( 1 )
$23.99
—
$44.99
Maintain your wheel centers with wheel bearings offered by Pro-X. Between riding and bike washing, wheel bearings take serious use and abuse. Pro-X wheel bearings are made to exact OEM specifications, to ensure maximum quality and performance. The Pro-X wheel bearings are offered as single or as set, and are a perfect match for your wheels, just the way you want it!
Not Yet Reviewed
$21.99
—
$53.99
Performance and reliability start with All Balls Racing. Their countershaft seal kits package a case hardened bushing and a replacement outer seal with any O-rings, snap rings, or lock washers required for your application. Whether your off-road ride has two wheels or four, All Balls Racing has a countershaft seal kit for you.
Not Yet Reviewed
$21.54
—
$22.90
Hot Rods output shaft kits feature a unique combination of innovative engineering and quality manufacturing. They are a quick solution to repairing a leaking output shaft seal in one complete kit. These kits include Hot Rods output shaft seal, output shaft bushing, o-rings, and a sprocket nut washer where applicable. Ride hard and be safe with quality parts from Hot Rods.
Not Yet Reviewed
$22.76
—
$33.21
Hot Rods counterbalance bearing kits are a must have for any new counter balancer, engine case installation or repair. These replacement kits include trusted Hot Rods bearings for the counterbalancer shaft for most modern 4-stroke engines.
Not Yet Reviewed
$34.16
Hot Rods crankshaft bearings and seal kits are the ideal alternatives to expensive OEM bearings and seals. These precision, high-quality crank bearing and seal kits complement Hot Rods' crankshaft assemblies. Hot Rods offers two crankshaft bearings and two seals to complete your installation.
Not Yet Reviewed
$25.61
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
