Availability
Showing In Stock Items. Show All 14 Items.
Classic Ford 302 stock drop-in long block crate engines from ATK High Performance are shipped to you fully dressed. These are basic stock engines with moderate horsepower and torque based off the 80-86 Ford 302 engine. These engines typically make about 240 horsepower on the dynamometer. Additional specs: * Block: seasoned OE roller block * Bore/Stroke: up to 4.060 x 3.000 * Displacement: 302 c.i.d. * Crankshaft: OE Ford cast late model crankshaft (50 oz. imbalance) * OE steel connecting rods 5.4 in. stock bolts * Pistons: hypereutectic * Piston rings: moly rings * Compression Ratio: 8.5:1 * Camshaft: hydraulic flat tappet * Camshaft specifications: OE stock * Camshaft bearings installed and blocked to OEM position * Cylinder heads: OE cast iron * Freeze plugs: brass installed and sealed * Rocker arms: stamped steel 1.5 ratio * Oil galley plugs: installed and sealed * Oil pan: OE 5 qt. front sump * Weight: 430 lbs. * For engine break-in please follow the ATK break-in procedure that is included with the engine.
( 31 )
$3,998.99
Ford Performance Parts 2018 2.3L 310 hp EcoBoost long block crate engines are designed for traditional rear drive installations. They're the same EcoBoost engine found in the 2018 Mustang and feature turbocharging, direct injection, and twin independent variable cam timing (Ti-VCT). The swap possibilities are almost endless: from early street rods, kit cars, most generations of Mustang, to just about any other vehicle build. Ford Performance Parts 2.3L 310 hp Mustang EcoBoost engine kit—this kind of performance comes standard with a dose of adrenaline! Features and items: * 310 hp and 350 lbs.-ft. torque at 3,000 rpm (with 93 octane fuel) * Production turbocharger * Starter and mounting hardware * Alternator and mounting hardware * Flywheel * Engine harness (not installed, must be used with Ford Performance control pack) * Throttle body (not installed, must be used with Ford Performance control pack) * Engine kit uses Ford Performance Parts M-6017-23T control pack (not included) for easy plug-and-play installation
Not Yet Reviewed
$5,242.99
Replace your old, tired mill with ATK High Performance Ford 302 300 hp Stage 2 long block crate engines to give your old ride new life. These engines are designed to be perfect replacements for your old 302, but with a bit more kick. The upgraded engines produce 300 hp and 336 ft.-lbs., while still maintaining a smooth idle and great driving manner. These mills are perfect for daily drivers or mild-mannered street rods. Ford 302 300 hp Stage 2 long block crate engines feature: * Handpicked, remanufactured blocks * OE cast iron cylinder heads * Intake manifold * OE crankshaft and connecting rods * Hypereutectic pistons * Hydraulic roller camshaft * Cam lift- .498 int./.498 exh. * Cam duration @ 0.50- 219 int./219 exh. * 9.0:1 compression * Distributor * Valve covers * Timing cover and timing set * Oil pan, pump, and pickup tube * Water pump * Front damper and flexplate
( 3 )
$4,210.99
The Edelbrock Power Package concept is second to none. To make things easier in parts selection, Edelbrock has taken the guesswork out of top-end component selection by actually placing the power package components together in complete kits. They include almost everything you need to make serious horsepower. These kits are available with different cams, intakes, and heads to deliver the torque and horsepower you're looking for. Horsepower output will vary depending on combinations of accessories used.
( 6 )
$3,734.95
Give your car, truck, or hot rod some extra motivation with ATK High Performance Ford 351W 385 hp Stage 1 long block crate engines. These engines are hand-built, balanced, and dyno-proven to ensure they are going to get you down the road, in a hurry and reliably. These engines come ready to be finished with your choice of factory dressings or aftermarket parts. Breathe some new life into your ride with these ATK High Performance Ford 351W 385 hp Stage 1 crate engines. ATK Stage 1 long block crate engines include: * Handpicked, remanufactured blocks * Edelbrock aluminum cylinder heads * OE crank and rods * Hypereutectic pistons * Hydraulic roller camshaft * Cam lift- .512 int./.512 exhaust * Cam duration at 0.50- 220 int./224 exhaust * 9.5:1 compression * Valve covers * Timing cover * Oil pan, pump, and pickup tube
( 2 )
$4,958.99
Bring your ride to life with ATK High Performance Ford 302 375 hp Stage 1 long block crate engines. These engines are based on the tried and true Ford 302 and are built to perform. ATK hand-assembles and balances each engine using top-quality parts to help them produce awesome power. Whether you are replacing an older, tired engine or just looking for a little more performance, ATK has you covered. Details and specs: * 375 hp/380 lbs.-ft. * Compression Ratio: 9.5:1 * ATK Aluminum heads * Hydraulic roller cam * Cast steel crankshaft 50oz external balance * Hypereutectic pistons * Seasoned OE roller block 1987-1995 * 4.040 in. bore x 3.000 in. stroke * One-piece rear main seal * Mechanical fuel pump provision * Dual sump oil pan HP08, Front sump oil pan HP78 * Melling high volume oil pump * Double roller timing set Cylinder Heads: * ATK aluminum cylinder heads * 58cc chamber * 2.02 in. intake/1.60 in. exhaust valves * 185cc intake runners * 1.6 aluminum roller rockers Roller Cam specs: * .512 intake/.512 exhaust * 220 intake/224 exhaust duration @ .050 - 112-degree lobe separation Recommended: * 34-36 degrees total timing * 13726548 firing order * Left Hand inlet reverse rotation water pump (HP08) * Right Hand inlet standard rotation water pump (HP78) * Autolite 3923 spark plugs 0.035 gap * 8mm Spark plug wires * 2,400-2,800 Stall converter * 1,500-6,500 dual plane intake * 80 GPH Fuel pump * 91 plus octane fuel * 680 cfm carburetor
Not Yet Reviewed
$4,765.99
Replace your old, tired mill with ATK High Performance Ford 302 300 hp Stage 1 long block crate engines and give your old ride new life. These engines are designed to be perfect replacements for your old 302, but with a bit more kick. The upgraded engines produce 300 hp and 336 ft.-lbs., while still maintaining a smooth idle and great driving manner. These mills are perfect for daily drivers or mild-mannered street rods. Ford 302 300 hp Stage 1 long block crate engines feature: * Handpicked, remanufactured blocks * OE cast iron cylinder heads * OE crankshaft and connecting rods * Hypereutectic pistons * Hydraulic roller camshaft * Cam lift- .498 int./.498 exh. * Cam duration @ 0.50- 219 int./219 exh. * 9.0:1 compression * Valve covers * Timing cover and timing set * Oil pan, pump, and pickup tube
( 12 )
$3,639.99
On Sale
VEGE remanufactured long block crate engines are an excellent foundation for budget-minded builds. These premium-quality refurbished engines are drop-in replacements for a wide range of stock vehicles—and can be retrofitted into additional applications. Each engine is reverse-engineered to ensure that any original defects are removed. Certified technicians recondition the long blocks to factory specifications, replacing wearable parts or machining them back to OE standards. The engines are thoroughly tested and calibrated to deliver maximum performance and long-term durability. Order the VEGE remanufactured crate engine recommended for your vehicle.
( 69 )
$2,482.99
—
$3,864.99
COMP Cams Thumpr NSR Ford Coyote 5.0 modular 4V camshafts present big power gains, along with the distinctive Thumpr idle lope—and you don't need to upgrade the valve springs. Ford 5.0L modular 4-valve V8 engines have become hugely popular, so how do you improve upon already great performance? With a camshaft from the COMP Cams family of Thumpr NSR camshafts! Choose the cam model (Thumpr or Mutha' Thumpr) designed for your vehicle and engine application. Features include: * Brings legendary Thumpr sound to the 5.0 Coyote * Optimized lobe profiles for increased airflow and exhaust efficiency * Big performance gains in mid- to upper-rpm range * Valve spring upgrade not required * One-piece billet steel construction * Compatible with N/A and supercharged applications
Not Yet Reviewed
$2,013.95
—
$2,046.95
COMP Cams XFI NSR Ford 5.0 Modular 4V camshafts unlock a major power upgrade for the 2011+ Ford 5.0L engine. Specifically designed for Coyote V8 applications, these camshafts are counterbalanced and work with phaser limiters to produce optimum, safe power. By taking cutting-edge race technology and applying it to street applications, COMP Cams has engineered these phaser-friendly cams with an exclusive, integrated counterbalance design that ensures a smoother operating valvetrain. They are available for both naturally aspirated and supercharged engines, with three stages available in each series. All cams are "no springs required." Optimized race and street profiles give you power where you need it the most, whether that's maximized midrange power and torque or increased top-end horsepower. Drive with COMP Cams XFI NSR Ford 5.0 Modular 4V camshafts and drive with sophisticated power!
Not Yet Reviewed
$2,013.95
—
$2,046.95
Edelbrock E-Force 8-rib belt drive upgrade kits are intended to upgrade the factory Ford 5.0L Coyote 6-rib belt drive system to an 8-rib to help reduce belt slip encountered in high boost applications with a smaller pulley. It is an ideal upgrade for an E-Force equipped Mustang GT, F-150, or crate engine. Each kit includes a water pump pulley, alternator pulley, harmonic damper, all necessary idler pulleys and tensioners, and hardware. E-Force 8-rib supercharger pulleys are sold separately and are available in sizes from 2.625 in. up to 3.250 in.
( 1 )
$2,369.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
