Availability
BluePrint Engines Chrysler 408 c.i.d. 465 hp crate engines sound and run better. BluePrint Engines use an advanced computerized balancer to get their rotating assemblies within 2 grams, ensuring silky smooth power over the entire rpm range. They also include a comprehensive, dyno-generated printout showing the critical specs. No more guessing what your installed engine's real-world peak horsepower and torque ratings are. Any doubters in the crowd? Simply flash them your Blueprint Engines' 408 c.i.d. stroker crate engine dyno results! Features, items, and specs: * Available in 3 levels of dress: Long block base, fully dressed, and drop-in-ready * Long block base model includes oil pan, timing cover, and valve covers * Fully dressed model includes long block components, plus carburetor, intake manifold, distributor, and harmonic balancer installed * Drop-in-ready model includes fully dressed components, plus water pump, air cleaner, spark plugs, and spark plug wires * Aluminum cylinder heads: 58cc chamber; 2.02 in. intake/1.60 in. exhaust valves; 176cc intake/75cc exhaust runners * Roller cam: .544 intake; .541 exhaust; 236 intake/242 exhaust duration at .050--110 degree lobe separation * Cast steel crankshaft: 4.000 in stroke; OEM-type 6.123 in. connecting rods with 150,000 psi bolts; forged pistons; external balance * Hand-picked, seasoned block: Square and parallel decked with precision-machined and sonic-tested cylinders, 2-bolt main, 4.000 in bored and .040 in. over, 2-piece rear main seal, and mechanical pump provision * 34 degrees total at 4,000 rpm ignition timing * Brass freeze plugs * Recommended fuel: 91 octane
( 1 )
$8,599.00
—
$9,649.00
ATK High Performance Chrysler 360 Magnum 320 hp Stage 1 long block crate engines are perfect for a street cruiser offering great street ability, stock idle, and good power. ATK Stage 1 or base engines are designed for those that may have their own component parts already, and who also are interested in completing out the build themselves. Typically ATK Chrysler 360 Magnum 320 hp base engines consist of: * Seasoned OE Magnum block * OE cast crankshaft * OE steel connecting rods * Hypereutectic pistons * Chromoly piston rings * Hydraulic roller camshaft * Magnum cylinder heads * Steel rocker arms * Timing set and cover * Oil pan, oil pump and pick-up tube * Valve covers
( 9 )
$3,298.99
These Summit Racing™ remote oil filter kits include a bypass adapter, filter mount, 8 ft. of oil hose, barb fittings, stainless steel hose clamps, mounting hardware, and instructions. These kits require a Fram PH8A or equivalent oil filter, which is not included.
( 188 )
$60.99
—
$74.99
PROMAXX Performance stock replacement cylinder heads are designed to be a direct replacement for your worn or cracked heads. These are new castings, modeled off OE castings for factory fit and finish. Some applications feature a thicker deck to solve common warping or cracking issues. Instead of spending the time and money refurbishing your existing heads, use PROMAXX Performance stock replacement cylinder heads.
( 7 )
$478.00
—
$1,841.00
Street cruisers really can't ask for more than they'll find in ATK high performance Chrysler 360 320 hp Stage 3 long block crate engines. They're packed with the finest, well-matched components, so you can drop the engine into your project and fire it up. ATK has outfitted the blocks as completely as possible to save you time and headaches. These complete Stage 3 long blocks typically include carburetion, spark plug wires, and plugs. ATK Chrysler 360 engines include: * Seasoned OE Magnum block * OE-cast crankshaft * OE steel connecting rods * Hypereutectic pistons * Piston rings * Hydraulic roller camshaft * Magnum 65cc cylinder heads * Steel rocker arms 1.6 pedestal * Brass freeze plugs installed and sealed * Oil galley plugs installed and sealed
( 2 )
$5,798.99
Are you looking for a set of entry-level street performance heads for your modern street rod, muscle car, or truck? Edelbrock E-Street cylinder heads are just the ticket. These heads feature A356 aluminum castings that are heat-treated to T-6 specs for superior casting strength and quality. Their modern combustion chamber design helps to improve the combustion process and their larger-than-stock intake and exhaust ports help to move more air through your engine. These features improve an engine's efficiency, resulting in more horsepower and torque and improved mileage potential. All Edelbrock E-Street cylinder heads are assembled with manganese bronze valve guides, powder metal interlocking valve seats, and stainless steel one-piece valves with hardened valve tips. Edelbrock E-Street cylinder heads are ideal for entry level street performance engines.
( 119 )
$1,642.95
—
$2,308.95
ATK High Performance Chrysler 360 Magnum 320 hp Stage 3 long block crate engines with EFI are perfect for a street cruiser, and offer great street ability, stock idle, and good power. Based around FiTech Self-Learning EFI systems, these engines come complete from throttle body down to the oil pan. The only thing you will need is to supply is the fuel system--in line, in tank, or the FiTech Fuel Command Center. Plus they are dyno-tested with your EFI system and ready to go! These Stage 3 engines with EFI set your vehicle up for better drivability and trouble-free cold starts with no tuning required, regardless of elevation, driving habits, or part swap! Typically ATK Chrysler 360 Magnum 320 hp complete EFI engines consist of: * Seasoned OE Magnum block * OE cast crankshaft * OE steel connecting rods * Hypereutectic pistons * Chromoly piston rings * Hydraulic roller camshaft * Magnum cylinder heads * Steel rocker arms * Timing set * Oil pan, oil pump and pick-up tube * Valve covers * Flexplate * Performance intake manifold * Distributor * Stock water pump * Front damper * FiTech Go Street EFI 400 hp * Spark plugs and wires * Dyno test/tune
( 2 )
$5,898.99
Clearance
ATK High Performance Chrysler 5.7 Gen III Hemi 400 hp long block crate engines were built in a team effort with Comp Cams. Utilizing ATK remanufactured GEN III 5.7L Hemi engines; they upgraded the camshaft, springs, and pushrods to produce reliable 400+ hp. Features typically include: * Seasoned OE Gen III Hemi block * OE reground crankshaft * OE reconditioned connecting rods * Hypereutectic pistons * Chromoly piston rings * Hydraulic roller camshaft * Aluminum cylinder heads * OE shaft mount rocker arms
( 5 )
$4,798.99
$3,999.50
—
$4,798.99
BluePrint Engines Chrysler 408 C.I.D. 465 hp dressed long block crate engines are fully Dyno tested, passed vigorous inspections, and ready to power up your project. These Mopar compatible crate engines are ready to replace your tired Charger, Dart, Roadrunner, or Barracuda powerplant. There's no replacement for displacement, and replacing a little 273, 318, or 360 with a Blueprint 408 stroker crate engine will have your back tires up in smoke in no time! They are offered with a polished or black finished serpentine 8-rib front pulley kit. Features, specs, and contents: * Horsepower and torque: 465 hp/494 lb.-ft. * Handpicked seasoned Magnum block * Cylinders honed to within .0002 straightness and roundness * 2-bolt main * 4.000 in. bored .040 in. over * Cast steel crankshaft * 4.000 in. stroke * Forged Magnum 6.123 in. connecting rods with 150,000 psi bolts * Forged pistons * Aluminum Magnum pattern cylinder heads--58cc chamber * Aluminum roller rockers * 2.02 in. intake/1.60 in. exhaust valves * 176cc intake/75cc exhaust runners * Roller cam * .580 intake/.577 exhaust * 235 intake/242 exhaust duration at .050 * 110 degree lobe separation * Valve covers, oil pan, timing cover, water pump, plugs, wires, distributor, water neck, thermostat, fuel pump and fuel line, harmonic balancer, air cleaner * Power steering pump: Type II with -6AN pressure, -10AN return, 1,400 psi * Air conditioning compressor: 7B10 Peanut-style * 30 month/50,000 mile warranty
Not Yet Reviewed
$11,599.00
—
$11,799.00
Callies Mopar engine blocks are Officially Licensed Mopar products. Together with Energy, Callies will manufactured and distribute cast iron engine blocks and components. All parts manufactured will carry authentic Mopar part numbers and be produced from original Mopar molds, cores, and engineering data. The Mopar blocks are being offered in different bore sizes in finished and RoughBore (RB) versions.
Not Yet Reviewed
$1,655.00
—
$6,039.00
BluePrint Engines Pro Series Mopar 426 c.i.d. Base dressed long block crate engines feature Gen III Hemi Apache aluminum cylinder heads—and can generate up to 872 hp and 764 lbs.-ft. of torque. --- BLOCK: NEW "BGE" Hellcat / Apache engine block 4-bolt main 4.090 in. bore One-piece rear main seal Compression ratio: 10.48:1 --- ROTATING ASSEMBLY: Forged steel crank 4.050 in. stroke 6.125 in. connecting rods Forged pistons Internal balance - front Internal balance - rear --- CYLINDER HEADS: Gen III Hemi Apache aluminum cylinder heads 73cc chamber 2.140 in. intake/ 1.650 in. exhaust valves --- CAM SPECS: Hydraulic roller cam .610 intake/ .611 exhaust lift 231 intake/ 255 exhaust duration at .050 – 113 degrees LSA --- IGNITION TIMING: Controlled by ECU --- ALSO INCLUDES: Whipple 3.0L supercharger Supercharger fluid reservoir Hellcat throttle body Harmonic balancer Muscle car style - mid sump swap oil pan Spark plugs and coils Timing cover Valve covers Water pump Holley Terminator ECU controller kit and wiring harness --- NOTES: Features 2013+ 58X reluctor wheel 2009+ crankshaft spacing 2009+ car timing cover VVT locked out MDS – eliminated ** Engine Accessory Specifications: These BluePrint engines were dyno tested with the parts and specifications listed below. If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet. -- Fuel Delivery Type: Whipple 3.0L supercharger -- Spark Plug: NGK 5107 -- Spark Plug Gap: .025 in. -- Harmonic Balancer: Non-Weighted -- Flex Plate/ Flywheel: Non-Weighted -- Stall Converter: 2500+ -- Intake Manifold: Supercharger -- Fuel Recommendation: 91 - 93 Octane -- Timing: Controlled by ECU -- Firing Order: 1-8-4-3-6-5-7-2
Not Yet Reviewed
$24,299.00
The Edelbrock Power Package concept is second to none. To make things easier in parts selection, Edelbrock has taken the guesswork out of top-end component selection by actually placing the power package components together in complete kits. They include almost everything you need to make serious horsepower. These kits are available with different cams, intakes, and heads to deliver the torque and horsepower you're looking for. Horsepower output will vary depending on combinations of accessories used.
( 3 )
$3,237.95
BluePrint Engines Pro Series Mopar 426 c.i.d. EFI Deluxe dressed long block crate engines feature Gen III Hemi Apache aluminum cylinder heads—and can generate up to 610 hp and 525 lbs.-ft. of torque. The engines are available with a polished or black anodized accessory drive pulley kit. --- BLOCK: NEW OEM Hellcat engine block 4-bolt main 4.090 in. bore One-piece rear main seal Compression ratio: 10.48:1 --- ROTATING ASSEMBLY: Forged steel crankshaft 4.050 in. stroke 6.125 in. connecting rods Forged pistons Internal balance - front Internal balance - rear --- CYLINDER HEADS: Gen III Hemi Apache aluminum cylinder heads 73cc chamber 2.140 in. intake/ 1.650 in. exhaust valves --- CAM SPECS: Hydraulic roller cam .610 intake/ .611 exhaust lift 231 intake/ 255 exhaust duration at .050 – 113 degrees LSA --- IGNITION TIMING: Controlled by ECU --- ALSO INCLUDES: Holley Terminator engine harness Fuel injection Throttle body Harmonic balancer Fabricated intake Manifold Muscle car style - mid sump swap oil pan Spark plugs and coils Timing cover Valve covers Water pump Installed complete front accessory drive: water pump, alternator, power steering, A/C, all belts and pulleys Holley Terminator ECU controller kit and wiring harness All sensors required for engine to run --- NOTES: Features 2013+ 58X reluctor wheel 2009+ crankshaft spacing 2009+ car timing cover VVT locked out MDS – eliminated ** Engine Accessory Specifications: These BluePrint engines were dyno tested with the parts and specifications listed below. If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet. -- Fuel Delivery Type: Fuel Injected -- Spark Plug: NGK 97408/ LZTR6AP11EG -- Spark Plug Gap: .043 in. -- Harmonic Balancer: Non-Weighted -- Flex Plate/ Flywheel: Non-Weighted -- Stall Converter: 2500+ -- Intake Manifold: Fabricated Aluminum Gen III HEMI -- Fuel Recommendation: 91 - 93 Octane -- Timing: Controlled by ECU -- Firing Order: 1-8-4-3-6-5-7-2
Not Yet Reviewed
$18,799.00
—
$18,899.00
Some people want a chrome pan, while others want a plain-Jane bare pan. No matter which style you like, Summit Racing™ stock replacement oil pans are perfect stamped steel OEM-style replacements. Most come with a stock baffle, a stock pump location, and a drain plug.
( 968 )
$85.99
—
$89.99
Summit Racing offers True Roller timing sets for a wide range of vehicles from the 1950s and up. These single- or double-roller sets have rugged true-roller chains, teamed with steel crank and cam sprockets. The crank sprockets feature multiple keyways, which allow you to set the cam timing to your choice of degrees in advanced, retarded, or normal. Order the timing set recommended for your year, make, and engine application.
( 176 )
$74.99
Scat engine rotating assemblies are available with either a high-quality Scat forged 4340 crankshaft or Scat's Series 9000 cast crankshaft, plus I-beam or H-beam connecting rods with 7/16 in. or 3/8 in. cap screw bolts. For maximum power and reliability, Scat adds rod and main bearings from King, Federal Mogul, or Clevite 77, depending upon the application—and pistons and piston rings made by such well-known manufacturers as SRP/JE, Ross, KB, Mahle, Diamond, and Probe. Kits with cast and standard forged pistons have standard rings; kits with premium forged pistons have file-fit rings. Nearly 800 Scat kits are available; order the package tailored for fitment with your engine application.
( 127 )
$1,475.99
—
$3,594.99
Summit Racing™ OE-style harmonic dampers are ideal for those mild street rebuilds that don't require the expense of a high-buck race damper. They feature durable nodular construction with bonded elastomer between the inner and outer rings. The balancers also have engraved timing marks, which means no timing tape! Summit dampers are available in a variety of sizes for many engine balance applications. Models are available for hundreds of vehicles; order the OE replacement recommended for your ride.
( 663 )
$106.99
VEGE remanufactured long block crate engines are an excellent foundation for budget-minded builds. These premium-quality refurbished engines are drop-in replacements for a wide range of stock vehicles—and can be retrofitted into additional applications. Each engine is reverse-engineered to ensure that any original defects are removed. Certified technicians recondition the long blocks to factory specifications, replacing wearable parts or machining them back to OE standards. The engines are thoroughly tested and calibrated to deliver maximum performance and long-term durability. Order the VEGE remanufactured crate engine recommended for your vehicle.
( 73 )
$2,366.99
—
$4,617.99
Summit Racing™ molded gasket windage trays offer more horsepower and less maintenance. Remove the oil pan and scrape off the gasket. Sound familiar? With our molded gasket windage trays, that's a thing of the past. They are made from glass-filled nylon and are fitted with reusable silicone gaskets, so you can remove them, wash them with soap and water, and reuse them over and over. Offering easy service and more performance, Summit Racing™ molded gasket windage trays mix a winning combination.
( 50 )
$68.99
—
$77.99
Scat forged standard weight crankshafts are designed for street or race engines with substantially increased horsepower. These crankshafts are precision-ground, heat-treated, shot-peened, inspected, and micro-polished for superior tolerance control. Scat crankshafts are also nitride-hardened for superior wear resistance, have straight-shot and chamfered oil holes, and feature lightening holes in all rod throws. They also have a large radius on all journals for improved strength and wear resistance. Scat forged standard weight crankshafts are available in dozens of sizes and configurations for fitment on vehicles spanning seven decades.
( 25 )
$986.99
—
$1,310.99
Start your build with a rock-solid bottom-end with these ATK High Performance Chrysler 408 A Stroker short blocks. These short blocks are built using high-quality components that are all hand-fit and balanced to create a reliable bottom-end that's ready to get your musclecar or truck moving. Just top the engine off with your own parts to build a custom engine that is designed to meet your goals. These ATK High Performance Chrysler 408 A Stroker short blocks include the following: * Handpicked and seasoned OE Magnum 1993-2001 blocks * Aligned and hone main bores * Nodular iron internally balanced crankshaft * 4.00 in. stroke * 4340 forged I beam connecting rods with ARP 8740 bolts * Hypereutectic pistons with 23.5cc dish * Plasma-moly rings * Approximate Compression Ratios: 62cc = 9.7:1 / 68cc = 9.2:1 / 72cc = 8.9:1
( 4 )
$2,998.99
Trust Summit Racing™ to give you timing sets that will deliver accurate, reliable cam timing. Our billet steel true roller timing sets have rugged double-row, true-roller chains teamed up with billet steel crank and cam sprockets. The crank sprockets have multiple keyways, which allow you to modify your cam timing. Get reliable timing from Summit Racing™ billet steel timing sets.
( 119 )
$105.99
—
$107.99
On Sale
All American Billet Silverline Series serpentine kits are designed to give any engine an aggressive black style, highlighted by machined finished areas for a truly standout look! These kits come standard with high performance accessories. Enjoy a no-hassle installation with all the hardware and necessary components included in the box. A variety of setups are available to fit models with or without power steering and air conditioning. Dozens of models are available; order the kit recommended for your vehicle and engine application.
( 7 )
$2,495.00
—
$3,095.00
$2,245.50
—
$2,785.50
These alternator accessories are sure to dress up any engine compartment. These pieces are highly polished and are show car quality.
( 77 )
$82.99
—
$93.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
