Availability
Showing In Stock Items. Show All 60 Items.
Melling factory replacement hydraulic roller lifters are designed and built to get the job done while ensuring efficient performance and quiet valve train operation. They are perfect for when you're ready to freshen up your engine. Melling factory hydraulic roller lifters are manufactured from the finest materials and designed for the proper fit and long dependable lifter life.
( 19 )
$10.99
For maximum performance and durability on the street or at the track, trust Fram HP Series oil filters. They offer twice the oil flow rate and four times the dirt-holding capacity of standard oil filters. Their extra-thick steel cans and heavier gauge tapping plates are designed to withstand the high pressures and flexing caused by demanding driving conditions. Tough steel end caps hold a spiral-shaped center tube to offer more durability and protection against collapse. Fram HP Series oil filters are compatible with all oil types and have been optimized for racing and high performance street cars. Additional features include: * Low-restriction racing media designed for high oil flow * 94 percent efficiency at 20 microns * Silicone anti-drainback valve on many applications * 10 to 18 gpm recommended maximum oil flow, depending on model * Maximum burst pressure: 350 to 500 psi, depending on model * Maximum operating pressure of 200 psi * Screen over bypass valve for extra protection against large contaminants * High-flow bypass valve * Flanged steel end caps
( 124 )
$16.99
—
$17.99
Your valves will open more quickly from a fully closed to a fully opened position with a roller setup, compared with conventional flat lifters. With Sealed Power Hydraulic roller lifters you will notice higher performance, quieter engine operation, and more horsepower. They also provide proper vacuum and idling capabilities.
( 27 )
$16.99
Clevite H-Series rod bearings were developed primarily for use in NASCAR type racing but are suitable for all types of competition engines. These H-Series bearings have a medium level of eccentricity, high crush factor, and have hardened steel backs and thin overlays. They also have enlarged chamfers for greater crankshaft fillet clearance and are made without flash plating for better seating. Bearings with .001 in. extra clearance are available for standard size shafts and with or without dowel holes. H-Series bearings are recommended for use with crankshafts that have oversize fillets and where engines run in the medium to high rpm range. They should also be used if contact patterns obtained with Clevite P-Series bearings are too narrow. Contact patterns should ideally cover 2/3 to 3/4 of the bearing surface.
( 163 )
$16.99
—
$19.99
Get oil filtration that's as good as gold with K&N Performance Gold oil filters. Keep your engine free from contaminants as small as 10 microns. They use a resin-impregnated filter media to provide maximum filtering and an inner core to lend extra structural support to the filter, preventing filter collapse. Plus, many of these K&N oil filters have an anti-drainback valve (where applicable) that eliminates dry starts and prevents oil from draining back into the crankcase during engine shutdown. And they're protected by a heavy-duty outer shell that guards against rock and stone damage and provides over 550 psi hydrostatic burst strength. So, if you want golden-level oil protection, then you want K&N oil filters.
( 512 )
$17.99
Lares power steering pulleys are designed to fit your OEM pulley setup. Manufactured from quality materials, and available for a wide variety of applications, each power steering pulley meets OE specifications to ensure a precise fit and proper function. Keep your steering system operating reliably, order the Lares power steering pulley in the application you need.
( 28 )
$21.99
Mopar Performance valve springs are made from stronger steel than OEM and are intended for general performance use. They're available for many applications in single and dual versions. And make a great choice for your muscle car.
( 4 )
$13.99
Take up the slack with Dayco No Slack Idler pulleys. These specially formulated glass-filled polymer or steel-bodied pulleys have smoother surfaces and tighter dimensional tolerances for less vibration and longer belt life. They meet or exceed OEM specifications and feature lifetime-lubricated bearings and high-temperature seals to ensure peak bearing performance. Maximum structural integrity and optimal performance mean Dayco value for you. Keep your belts from slacking off with Dayco No Slack Idler pulleys.
( 80 )
$17.99
—
$19.99
These heavy-duty Summit Racing™ balancer bolts are the best way to bolt on your damper. As the crankshaft flexes and twists, the damper absorbs a lot of kinetic energy. To ensure that the damper stays on tight, these bolts include a thicker flat washer, machined perfectly flat to spread the fastening load over a greater surface area. They're manufactured from premium materials for maximum strength and feature a quality finish for good looks.
( 116 )
$15.99
Mopar oil filters are ready for high performance. They are engineered to meet the demands of your heavy-duty and high-power applications. The the best performance of your vehicle choose genuine Mopar Performance oil filters.
( 5 )
$11.99
P-Series rod bearings are the oldest members of the Clevite 77 performance bearing family. They're intended for high-revving engines, especially those where the high rpm cause the rod bores to narrow. To compensate for this distortion, these direct replacements have higher eccentricity and a high crush factor. Clevite P-Series rod bearings are built on hardened-steel backings with extra-thin overlays, and their lower sections have dowel holes for use with aluminum rods, and there are extra-clearance variations available with an additional 0.001 in. of clearance. Order the model designed for your vehicle and engine application.
( 286 )
$12.99
Melling oil pump screen assemblies are designed for use with your Melling oil pump. These replacement pickups have a built-in filter screen and are engineered to fit the stock pan and specs—and, in some cases, Street/Strip and Circle Track applications. Various installation methods are available, including bolt-in, press fit, and screw-in. Melling offers nearly 200 models; select the assembly tailored for fitment with your specific vehicle or engine.
( 377 )
$20.99
—
$21.99
Edelbrock rocker arm stud bolt kits are designed for use with the Edelbrock Performer and RPM small block Chevy and Ford cylinder head applications. These screw-in style rocker arm stud bolts are manufactured from high-quality material for strength and durability and run in straight and true to offer nothing less than positive seating.
( 23 )
$23.95
Melling rocker arms, available for both domestic and import applications, meet or exceed OEM specifications. Depending on the OE design specifications, Melling rocker arms are provided in either stamped or cast materials. Built from only the best materials and manufacturing processes available, they are perfect replacements priced right for your budget. Melling recommends installing new rocker arms with every engine rebuild to assure long engine life and efficient performance. Answer the little knock under your hood with replacement rocker arms from Melling--a supplier of quality engine parts.
( 74 )
$10.99
Clearance
Whether it's a car, truck, motorcycle, marine, or performance racing—properly sealing the piston to the engine block is a requirement. Hastings Piston ring sets do just that, while being offered in many different options to fit virtually any piston out there. If the engine your working on is blowing smoke, using excessive oil, or at a loss for power, it may be time for new rings. Hasting piston ring sets are great for rebuilds or new builds. Hastings has been manufacturing piston rings since 1915 and they have not spent a second developing anything but piston rings. Trust the professionals at Hastings and use them on your next job.
( 118 )
$19.99
—
$23.99
Dorman expansion plugs are conveniently designed aftermarket replacements for stripped plugs. A leak-proof fit and long service life are assured every time, due to high-quality standards and materials used in the manufacturing process. Dorman engine and camshaft expansion plugs are offered in multiple sizes, styles, and materials for precise fitment on countless makes and models. They're easy to install and available individually or in multi-pack sets.
( 75 )
$13.99
Do you have a rounded-off, stripped, or leaking drain plug? If so, then pick up one of these Dorman oil pan drain plugs. Designed and constructed to strict engineering quality standards, they are high-quality OE replacements coated for corrosion resistance and a long service life. Dorman's oversized, piggyback, and rubber expanding plugs eliminate the need to replace the entire pan, saving you time, labor, and money.
( 74 )
$10.99
ARP High Performance Series connecting rod bolts are made from seamless and defect-free 8740 chromoly steel. All ARP rod bolts are heat-treated before grinding and thread rolling and have a large underhead radius for greater strength. Guaranteed to pass magnetic inspection testing, these bolts are nearly five times stronger than OEM bolts. They're used in applications ranging from stock replacement to Circle Track, marine, and drag racing engines.
( 259 )
$12.99
When oil, heat, and abrasion combine to weaken most standard accessory belts, Continental OE Technology Series V-belts will still be going strong. Continental V-belts have inherited tough construction characteristics: EPDM rubber compounds, high-strength Vytacord tension members, fiber reinforced helical cogs, and high-traction rubber edges. These features provide higher heat and abrasion resistance, no-slip contact with pulley grooves, a great fit, and improved flexibility—to deliver consistent, efficient performance, mile after mile. Belts wear and need replaced; get more for your buck with longer-lasting Continental OE Technology Series V-belts, available for a wide range of vehicle-specific applications.
( 50 )
$14.99
—
$20.99
Mopar Replacement PCV valves are genuine OE replacements. That means your Chrysler, Dodge, Plymouth, or Jeep will receive the perfect part to repair and/or restore performance, just as it should be. These valves are made from quality materials to provide reliable, long service with the right fit, function, and value. Replace failing positive crankcase ventilation valves with Mopar PCV valves. Order the model designed for your specific vehicle.
( 4 )
$19.99
Dorman offers dipstick tubes for a wide variety of vehicles. These engine oil dipstick tubes are made to OE specifications, ensuring proper fit and performance for your application.
( 22 )
$18.99
Dayco High Performance V-belts deliver more flexibility and increased airflow around the accessory drive belt, so they run cooler and last longer than most competitive belts. Dayco was one of the first to develop raw edge sidewall construction, which facilitates controlled slippage around pulleys. This feature ensures the superior performance that drivers demand from their vehicle. The V-belts' three plies of neoprene-impregnated fabric resist heat, oil, and grease. A specially formulated treatment of the polyester cord provides the strength, stability, and reliability that's required within the standards of today's industry.
( 85 )
$21.99
It's never a good idea to cut corners when you're installing new valves. Melling is noted for its world-class engineering, superior grade alloy materials, and advanced manufacturing processes. Melling intake and exhaust valves meet the exacting specifications required for efficient, durable, and powerful performance. They feature high-fatigue strength, excellent heat resistance, and offer years of dependable service. Available in a wide variety of designs and materials for most OEM and performance vehicle applications, each valve is built and validated to meet or exceed OE specifications. Melling valves—unsurpassed quality you can trust.
( 44 )
$11.99
—
$12.99
King SI-Series rod bearings are recommended for OE applications. They're designed for aftermarket gasoline or diesel engine rebuilding and performance engines with OE crankshafts. These direct replacements have an improved finish for reducing microscopic ferrite peaks on improperly ground or polished nodular cast iron crankshafts. King SI-Series rod bearings also feature improved oil clearance to reduce wear and increase engine life—which, in turn, lessens operating noise, vibration, and excess oil flow. Hundreds of sets are available; order the bearings recommended for your vehicle.
( 94 )
$18.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
