Availability
Showing In Stock Items. Show All 37 Items.
Clevite H-Series rod bearings were developed primarily for use in NASCAR type racing but are suitable for all types of competition engines. These H-Series bearings have a medium level of eccentricity, high crush factor, and have hardened steel backs and thin overlays. They also have enlarged chamfers for greater crankshaft fillet clearance and are made without flash plating for better seating. Bearings with .001 in. extra clearance are available for standard size shafts and with or without dowel holes. H-Series bearings are recommended for use with crankshafts that have oversize fillets and where engines run in the medium to high rpm range. They should also be used if contact patterns obtained with Clevite P-Series bearings are too narrow. Contact patterns should ideally cover 2/3 to 3/4 of the bearing surface.
( 164 )
$11.99
—
$20.99
These Summit Racing™ connecting rod bearings are just what you need to freshen up your engine. Why? They use silicon aluminum bi-metal construction. Silicon aluminum is the choice for many of today's engine manufacturers because of its high fatigue strength and superior temperature threshold. Bearing wear is dramatically reduced and the fatigue strength is greatly improved.
( 116 )
$19.99
—
$24.99
These Summit Racing™ main bearings are just what you need to freshen up your engine. Why? They use silicon aluminum bi-metal construction. Silicon aluminum is the choice for many of today's engine manufacturers because of its high fatigue strength and superior temperature threshold. Bearing wear is dramatically reduced and the fatigue strength is greatly improved.
( 96 )
$19.99
—
$23.99
These Summit Racing™ camshaft bearings are just what you need to freshen up your engine. Why? They use silicon aluminum bi-metal construction. Silicon aluminum is the choice for many of today's engine manufacturers because of its high fatigue strength and superior temperature threshold. Bearing wear is dramatically reduced and the fatigue strength is greatly improved.
( 64 )
$20.99
Economical Dura-Bond standard cam bearings feature round babbit construction for low friction, outstanding conformability, and added embeddability.
( 94 )
$10.99
—
$21.99
King SI-Series rod bearings are recommended for OE applications. They're designed for aftermarket gasoline or diesel engine rebuilding and performance engines with OE crankshafts. These direct replacements have an improved finish for reducing microscopic ferrite peaks on improperly ground or polished nodular cast iron crankshafts. King SI-Series rod bearings also feature improved oil clearance to reduce wear and increase engine life—which, in turn, lessens operating noise, vibration, and excess oil flow. Hundreds of sets are available; order the bearings recommended for your vehicle.
( 91 )
$10.99
—
$21.99
Today's engines operate under very demanding conditions. Sealed Power has responded to this challenge with their babbit high performance cam bearings. They feature high embedability and conformability and a special "sacrificial" design that enables the bearing surface to deform under extreme loads, preventing any wear and damage to the camshaft.
( 115 )
$20.99
—
$23.99
King SI-Series main bearings are recommended for OE applications. These replacement bearings are designed for aftermarket gasoline or diesel engine rebuilding—and performance engines with factory crankshafts. The bearings have an improved crankshaft finish for reducing microscopic ferrite peaks on improperly ground or polished nodular cast iron crankshafts. King SI-Series main bearings feature improved oil clearance to reduce wear and increase engine life, which in turn reduces operating noise, vibration, and excess oil flow. Order the bearing set designed for fitment on your make and model.
( 78 )
$16.99
—
$19.99
P-Series rod bearings are the oldest members of the Clevite 77 performance bearing family. They're intended for high-revving engines, especially those where the high rpm cause the rod bores to narrow. To compensate for this distortion, these direct replacements have higher eccentricity and a high crush factor. Clevite P-Series rod bearings are built on hardened-steel backings with extra-thin overlays, and their lower sections have dowel holes for use with aluminum rods, and there are extra-clearance variations available with an additional 0.001 in. of clearance. Order the model designed for your vehicle and engine application.
( 285 )
$10.99
—
$20.99
For stock replacement rod bearings with perfect fit and function, choose Chevrolet Performance. Available for your LS-Series and big block engines, these rod bearings offer worry-free performance for your big horsepower. When you need originals, go to the original--Chevrolet Performance connecting rod bearings.
Not Yet Reviewed
$21.99
Summit Racing™ offers cam bearing sets for a wide range of applications—including many Chevrolet small block V8 engines from 1955 and up. These bearings support the camshaft and allow it to rotate so it will activate pushrods and rocker arms to open and close valves. The direct replacements are available in a variety of materials. Order the set recommended for your vehicle.
Not Yet Reviewed
$16.99
—
$24.99
Federal Mogul CP-Series rod bearings feature classic tri-metal construction and are a good choice for either street or moderate competition use. They have rugged 1010 steel backings, covered by Federal Mogul's H-24 copper-lead alloy. On top of this is a nickel barrier, followed by the tri-metal (lead-tin-copper) overplate that gives these bearings their strength and fatigue resistance. The bearings are then entirely covered with a flash coating of tin. Order the set designed for use with your make/model and engine application.
( 115 )
$12.99
Clevite coated H-Series rod bearings were developed primarily for NASCAR racing, but are also well suited to other types of competition engines. They're especially good for engines that run at medium-to-high revs. They have hardened-steel backings with thin overlays and a high crush factor, plus a medium level of eccentricity. H-Series bearings feature Clevite's exclusive TriArmor coating, the industry's only moly/graphite treatment. The sophisticated blend, in a low-friction PTFE polymer base, offers extraordinary protection and lubricity. They also have enlarged chamfers at the sides for greater crank-fillet clearance and are made without flash plating for better seating. The Clevite coated H-Series rod bearings are available with various under-sizes, including 0.001 in. of clearance for polished journals.
( 10 )
$11.99
King Engine BB-Series cam bearings are recommended for OE rebuild applications. These cam bearings are babbitt on steel, and are precision machined and then micro-finished to offer long-lasting durability. Save yourself a costly rebuild with King Engine BB-Series cam bearings—stock replacements that been proven, time and time again, to get the job done.
( 14 )
$18.99
If you liked the results that you used to get with Vandervell bearings--especially their higher conformability--then you should love Clevite V-Series rod bearings, which basically duplicate the Vandervell items. Built on un-plated, hardened-steel backings for better dimensional accuracy and bore contact, they have low-to-medium eccentricity. The biggest difference between V-Series and other Clevite 77 bearings is their lead-indium surface alloy, which gives them that extra conformability. V-Series bearings are available in narrower versions to provide greater crank-fillet clearance, as well as in extra-clearance variations that provide an additional 0.001 or 0.002 in. of clearance.
( 5 )
$12.99
—
$17.99
If you're building up a Dart block and want the best bearings with the correct sizing, then you'll want Dart cam bearings. They're fully grooved, made from steel-backed babbit, and specifically designed for high performance use. To all of this, Dart adds their own moly-PTFE coating for even better performance and durability. This coating is approximately 0.0005 in. thick, which translates into 0.001 in. less overall clearance.
( 34 )
$18.60
—
$19.77
Clevite thrust washer bearings are available for a variety of engine configurations and engines to suit your vehicle's needs. They are manufactured from quality materials and install in the factory location with no modifications.
( 1 )
$15.99
Engine Works rod bearing sets are quality bearing sets available in various series and clearances. Offered in bi-metal or Alecular tri-metal construction, these rod bearing sets also come in a variety of clearance options from standard through .030 in., with a .001 in. X-clearance available on some sets. When you want high-quality and high-value parts for your performance vehicle, Engine Works delivers. Check availability and order the set recommended for your ride.
Not Yet Reviewed
$17.46
ACL direct replacement rod bearing sets are affordable, high-quality bearings expertly made from premium materials and engineered to match your exact requirements. They are offered in the Aluglide and Duraglide Series of bearings in numerous sizes, including standard, and covering a vast range of automotive gas engines, as well as diesel applications. Select the set desired for your build. ACL Aluglide bi-metal bearings are designed with a proprietary composition of aluminum, tin, and silicon combined with a steel backing to provide exceptional wear resistance, outstanding strength, and excellent load-carrying characteristics. ACL Duraglide bearings feature a tri-metal (copper/lead/alloy) design that provides a combination of high strength and the ability to withstand harsh/demanding operating conditions above casual driving, making them ideal for performance engines and rebuilds.
( 1 )
$10.99
—
$21.99
Sierra Marine offers various sizes of rod bearings to meet your marine engine needs. They provide the rotating motion of the crank pin within the connecting rod, which transmits cycling loads applied to the piston. Whether you're repairing or building, order the Sierra Marine rod bearings designed to fit your application and reap the rewards of a job done well!
( 1 )
$15.99
BoostLine connecting rods include pin bushings; they also offer wrist pin bushings separately as replacements to service your rods. They are high-quality APMCO bronze pin bushings—a must for your high performance application. Choose the inside diameter needed.
Not Yet Reviewed
$19.95
King AM-Series rod bearings are recommended for street or marine applications. They have superior embeddability, which provides greater macro-particle and reduces scratching of the crank journals and tearing or weakening of the Babbitt overlays. The direct replacements feature tolerance control up to +/- .0001—and they're lead-free, making them environmentally friendly and user-safe. Order the King AM-Series rod bearings in the application designed for proper fitment with your vehicle.
( 27 )
$14.99
—
$20.99
King AM-Series main bearings are recommended for street or marine applications. These crankshaft bearings have superior embeddability, which provides greater macro-particle to reduce scratching of the crank journals and tearing or weakening of the Babbitt overlays. King AM-Series main bearings feature tolerance control to within plus or minus .0001—and they're lead-free, making them environmentally-friendly and user-safe. Hundreds of performance sets are available; order the replacement bearings designed to fit your vehicle.
( 34 )
$18.99
Keep your main caps secure with a set of Chevrolet Performance main cap fasteners. They are made from quality OEM materials and are built to strict tolerances to ensure a direct fit. You don't ever want to have a failure in your engine's rotating assembly. Pick up Chevrolet Performance main cap fasteners for maximum reliability.
( 6 )
$13.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
