Availability
Showing In Stock Items. Show All 176 Items.
On Sale
You don't have to sacrifice safety or quality to save money; our affordable Summit Racing™ bracket racer SFI dampers have been spin-tested to 12,500 rpm and carry an SFI-18.1 rating. The carbon steel dampers have an injection-molded and bonded elastomer, easy-to-read engraved timing marks, removable counterweights (where applicable), and a highly polished baked-enamel finish, so they look as good as they perform.
( 388 )
$161.99
—
$189.99
These Cloyes Quick Button two-piece timing covers have a removable center plate with an O-ring seal to allow for easy access to your cam when changing your timing. Depending upon your application, some covers feature a built-in roller cam button that allows you to adjust cam endplay with the cover in place. Precision-machined from die-cast aluminum for sure sealing, these covers fit with most water pumps and timing sets.
( 136 )
$186.99
—
$224.99
Clevite H-Series main bearings were developed primarily for NASCAR racing, but are well suited to other types of competition engines as well. They're especially good for engines that run at medium-to-high revs. They have steel backings with carefully selected overlays and a high crush factor, plus a medium level of eccentricity. H-Series bearings have enlarged chamfers at the sides for greater crank-fillet clearance and are made without flash plating for better seating. They are also available with either 180 degree or 360 degree oil grooves, as well as an extra 0.001 in. of clearance.
( 133 )
$101.99
—
$143.99
These Proform Super-Street roller rocker arms will help rid your engine of internal friction. They feature a race-proven, cage bearing fulcrum and roller tip. The Super-Street rocker arms not only unleash horsepower, but they also lengthen valvetrain component life and reduce wear and tear on valve stem tips. Proform rockers are precision-machined to ensure consistency and ratio accuracy, and they have a great looking anodized finish.
( 125 )
$189.99
—
$246.99
Offering a level of True Roller advantage for the value-racer, Cloyes upgraded the cam sprockets to feature the strength of billet steel and added critical functioning features. The billet steel durability, 9-keyway induction-hardened crank sprocket, .250 True Roller chain, and precise CNC machining together offer quality and adjustability unmatched in their class. Features include: • Billet steel cam sprocket • Induction heat-treated billet steel crank sprocket • 9 keyways allow +/- 8 degrees • Adjustability in 2 crank degree increments • True Roller chain with .250 in. diameter rollers
( 142 )
$100.99
—
$164.99
On Sale
Weiand oil pan packages were clearly visible on those old gassers, getting them down the track with speed and consistency. The oil pan features trap door baffles to help keep oil under control during hard acceleration, as well as increased oil capacity to keep high performance engine oil systems fed properly. Choose from among dozens of Weiand oil pan packages—a great option for drag race, road race, and circle track applications.
( 104 )
$211.95
Get rid of those boring, old valve covers and put on a set of GM-licensed diecast aluminum Chevrolet valve covers from Proform. These premium covers feature stout diecast aluminum construction with thick gasket rails to resist unwanted oil leaks. They are equipped with GM-designed baffles, so you can be sure they'll work well. The covers have recessed Bowtie and Chevrolet logos that are inlaid with classic Chevrolet red. They're available in your choice of chrome plated, black crinkle, or polished finishes.
( 180 )
$211.95
—
$238.95
On Sale
For a lubrication system that can keep up with your high performance engine, start by bolting on one of our Summit Racing™ oil pans. These steel pans are built by hand in America with power-supporting features like a directional windage screen, a trap door baffle for improved oil control, and a built-in crankshaft scraper. They also have magnetic drain plugs, 1/4 in. NPT dipstick fittings (dipstick not included), and a black powdercoated finish for rust prevention. Small Chevy pans are compatible with a 3 7/8 in. stroke, while big Chevy pans work with up to a 4 1/4 in. stroke.
( 100 )
$250.99
—
$261.99
Edelbrock Elite II Series valve covers are the next generation of the original Elite Series valve covers. The Elite II Series feature a design that is influenced by the Elite Series originally released in 1985, but with a new modern take on this classic look. The valve covers are made from heavy-gauge, die-cast aluminum and are finished off with a show quality high luster polished finish. The raised fins are accented by a contrast gloss black finish between the fins for the definitive Elite Series look. Depending on application, Elite II valve covers are available in both stock and tall styles. Tall profile valve covers are 2 in. taller than stock and clear most roller rockers and valve train components, while the stock profile versions clear accessories like air-conditioning and alternator brackets.
( 177 )
$173.95
—
$238.95
Trust Summit Racing™ to give you timing sets that will deliver accurate, reliable cam timing. Our billet steel true roller timing sets have rugged double-row, true-roller chains teamed up with billet steel crank and cam sprockets. The crank sprockets have multiple keyways, which allow you to modify your cam timing. Get reliable timing from Summit Racing™ billet steel timing sets.
( 118 )
$104.99
—
$209.99
Summit Racing™ economy oil pans bring affordable performance to your engine build. Trap door baffles keep oil under control during hard acceleration and the increased pan capacity keeps your high performance oil system fed properly. Building a stroker? Small block Chevy pans will clear up to 3.75 in. stroke cranks, while the big block Chevy pans will clear strokes up to 4.50 in. Next time you're building on a budget look no further than these Summit Racing™ economy oil pans.
( 128 )
$125.99
—
$193.99
Proform stamped steel valve covers are 20 percent thicker than typical aftermarket valve covers. This greatly reduces the likelihood of leakage around the valve cover flange area caused by fasteners being over-torqued. These heavy-gauge steel covers are officially licensed GM products and bear the Chevrolet logo and Bowtie Emblem, unless otherwise specified. They're available in both tall and short heights, with either a chrome or black crinkle finish. Oil-restricting baffles are offered in many valve covers, for those who want to maintain the PCV hookup; and all covers are supplied with grommets for use with an air breather and PCV valve.
( 311 )
$100.95
—
$214.95
Holley Track Series valve covers are GM licensed and provide an excellent way to add high-end appeal to your favorite Chevy engine. These lightweight, yet tough valve covers are constructed of 6061 T-5 sheet aluminum, precision TIG-welded for a proper fit. They feature laser-etched Chevrolet and Bowtie emblems. The covers are available in silver anodized or black coated finishes, along with various heights to clear most popular rocker arm combinations. All models include mounting hardware for quick and simple installation.
( 69 )
$199.95
—
$230.95
Smoother, tighter, and quicker--Melling Shark Tooth oil pumps utilize helical asymmetrical technology to improve the heartbeat of the traditional internal gear pump. The use of this new gear design feeds your engine an increased flow of oil without the usual pulsing. How much more? About 10 to 25 percent more volume! Equip your setup for a powerful bite of high performance; install one of these Melling Shark Tooth oil pumps. Melling Shark Tooth pumps are: * Smoother--significant reduction in pressure ripple (pulsing) also means a reduction in torque ripple in pump drive, improved distributor operation, a reduction in spark scatter, and improved distributor gear wear and intermediate shaft wear * Tighter--improved sealing of gear tips to housing provides reduced internal leakage and improved efficiency and performance * Quicker--increased inlet vacuum equals faster primes
( 43 )
$140.99
—
$199.99
ACL Performance offers Race Series rod bearing sets for a wide range of vehicles. These high performance tri-metal engine bearings are designed to withstand higher RPM conditions. They feature a high-strength overlay plate with reduced thickness for improved fatigue properties. Select the crankshaft undersize and quantity recommended for your year/make and engine application. Additional details: * Hardened steel backs on all rod bearings to improve the support of the bearing lining and assist with bearing retention in the housing. * Increased crush for improved bearing retention * Elimination of flash plating on the back of the bearings to improve heat transfer through the bearings and to maximize the grip between the bearings and its housing * Increased eccentricity to compensate for bore distortion at high RPM and to assist in the formation of hydrodynamic oil films * 3/4 in. grooved main bearings to optimize bearing load carrying surface area and oil flow to the conrod bearings * Tight consistent wall tolerances to help you maintain consistent clearances * Enlarged ID chamfers on bearing edges (where required) to accommodate large fillet radius on performance crankshafts
( 7 )
$105.99
—
$179.99
Summit Racing™ OE-style harmonic dampers are ideal for those mild street rebuilds that don't require the expense of a high-buck race damper. They feature durable nodular construction with bonded elastomer between the inner and outer rings. The balancers also have engraved timing marks, which means no timing tape! Summit dampers are available in a variety of sizes for many engine balance applications. Models are available for hundreds of vehicles; order the OE replacement recommended for your ride.
( 660 )
$119.99
—
$133.99
Melling's years of experience are apparent in these Performance oil pumps. They boast a CNC-machined body and cover and hardened steel gears that are up to 25 percent longer, providing additional flow to performance engines with wider bearing clearances. Their drive and idler shafts have been extended into the cover to provide additional support and eliminate dynamic shaft deflection.
( 188 )
$162.99
—
$187.99
Mr. Gasket cast aluminum covers are constructed of high quality die-cast aluminum for an excellent fit. They are available in polished, finned, and ball-milled versions to fit a variety of engines. Features: * Top quality cast aluminum construction * Choice of smooth top polished, finned, or ball-milled designs * Some available in tall versions for additional rocker arm clearance * Thick gasket rail area for excellent sealing * Pre-punched breather openings with baffles * Includes mounting hardware
( 87 )
$114.95
—
$135.95
If you're looking for pistons with an unbeatable combination of performance and value, then Speed-Pro hypereutectic pistons are for you. These pistons are manufactured from aluminum alloy that contains 16 percent silicon for greater strength and wear resistance. They're also molded in the latest permanent-mold technology to ensure the precise fit and tight bore clearances that today's top engine builders demand. Hypereutectic pistons are ideal for use in high performance street, bracket, and oval track racing—and will work perfectly with normal ring end gaps. Choose the model designed for your vehicle and engine application.
( 330 )
$139.99
—
$257.99
Designed for street performance machines that see occasional strip use, these Moroso oil pans are modified with deep or kicked-out sumps for increased capacity and oil control under hard acceleration. With a simple bolt-on installation into most production chassis, these Moroso street/strip oil pans are perfect for the weekend warrior.
( 409 )
$172.99
—
$265.99
Summit Racing™ offers diecast aluminum oil pans for hundreds of vehicles from the 1950s and up. These top-quality OE replacements are available in a variety of styles, sizes, and finishes. Order the model recommended for your application. (Not intended for racing purposes.)
( 65 )
$146.99
—
$243.99
With Cloyes Hex-A-Just timing sets, infinitely adjustable cam timing is as simple as turning an Allen wrench. Consisting of SAE 1144 billet steel cam and crank sprockets and a true roller timing chain, these timing sets use a special hex-head bushing installed on your cam's dowel pin. This bushing lines up with degree marks on the cam sprocket. You can adjust timing in fractions of a degree (as much as +/-6 degrees) by loosening the cam bolts and turning the bushing with an Allen wrench. Cloyes Hex-A-Just timing sets install under your stock timing cover and can be used in align-bored blocks. Order the model designed for your vehicle and engine application.
( 34 )
$199.99
—
$263.99
Restore your engine to its true power potential with Melling's stock replacement cam and lifter kits. They're perfect for either replacement or stock rebuilds. Melling cam and liter kits also include a matched set of lifters so you won't have to worry about mismatched parts during installation.
( 20 )
$269.99
Howards Cams double roller billet steel timing sets are designed for accuracy and long life. Lightweight by design, these sets feature a billet steel cam sprocket with lightening holes, a heat-treated crank sprocket, and a black oxide coating. They also include large .250 in. diameter seamless roller chains.
( 64 )
$124.99
—
$139.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
