CHEVROLET C10 PANEL Engines & Components

Melling High-Volume Oil Pumps

Melling high-volume oil pumps give you an additional 20 to 25 percent of much-needed oil volume for your performance application. For those of you who need added pressure, many pumps are supplied with a high-pressure spring (where noted). The pumps are built using a proprietary casting process, which yields maximum performance and reliability. Every Melling oil pump is completely pressure-tested, including idle and bypass pressure, before it leaves the factory. Dozens of models are available for fitment; order the pump and options needed for your vehicle.

4.62 out of 5 stars ( 372 )

$118.99

Derale Engine Oil Filter Relocation Kits

Now you can easily move your vehicle's oil filter to a more convenient location for quicker and easier filter changes with one of these Derale Performance engine oil filter relocation kits. They work great for engine swaps, too! The kits are available for hundreds of vehicles; order the model recommended for your application.

3.85 out of 5 stars ( 40 )

$112.40

Melling Oil Pumps

Why waste time installing an old, worn-out oil pump when you can get a brand new Melling replacement oil pump at such a low cost. They're manufactured from a variety of high-quality materials with all-new components—and are individually hand-turned and pressure-tested to guarantee that they'll perform as well as OEM. These pumps are available in various styles, pressures, and volumes (some include an oil pickup). Find the model designed for fitment with your vehicle and engine.

4.57 out of 5 stars ( 331 )

$146.99

Sealed Power Main Bearing Sets

Today's engines operate under very demanding conditions. When these Sealed Power main bearing sets are used in performance applications, all components are pushed to their limits—and many must be changed to meet these special demands. Federal Mogul, a longtime supplier to both OEM and the aftermarket, has responded to this challenge with its tri-metal, copper-lead, high performance main bearing sets. They're tested in the lab and proven on the track. The bearings are available for various crankshaft undersizes, for direct replacement or performance usage on a wide range of specific applications.

4.45 out of 5 stars ( 98 )

$121.99

—

$126.99

Clevite P-Series Main Bearings

Clevite P-Series main bearings are the oldest members of the Clevite 77 bearing family and are intended for high-revving engines. To compensate for the high-load factors and distortion in these engines, these bearings have higher eccentricity and a high crush factor. P-Series bearings are constructed of tri-metal cast copper lead. They have a steel back for support, a cast copper lead lining to withstand the loads of engine operation, and an electroplated babbit overlay on the running surface to provide searing surface qualities. In addition, the oil grooves on most applications extend all the way around both halves for better oiling. Clevite P-Series main bearings are an ideal design, producing a degree of conformability, embedability, slipperiness, and fatigue resistance, not found in original equipment and competitive bimetal bearings.

4.57 out of 5 stars ( 255 )

$115.99

Melling Stock Replacement Camshafts

Perfect for replacements or stock rebuilds, Melling stock replacement camshafts can restore your engine's true potential. They're available in a variety of styles, including hydraulic flat tappet, roller tappet, and roller follower; and mechanical flat tappet. Melling offers affordable, quality engine parts, including a full line of cams for cars, light trucks, and imports as far back as the mid-1950s. If you want quality that you can count on at a price that's hard to beat, order the Melling stock replacement camshaft designed for fitment on your vehicle.

4.36 out of 5 stars ( 22 )

$165.99

Mahle Original OE Replacement Pistons

Mahle Original replacement pistons have the same great OE features to provide the perfect fit and function in your vehicle. They offer things like compensated ring grooves to ensure proper ring loading and oil control; as well as expansion-controlled designs for small fitting clearances—to reduce engine noise, wear, emissions, and improved oil control. Choose the model designed for your vehicle and engine application.

4.0 out of 5 stars ( 7 )

$154.99

—

$158.99

Mahle Original Premium Piston Ring Sets

Mahle Original piston ring sets are designed to be installer-friendly. They are pre-lapped to seat immediately, virtually eliminating break-in time. Ring materials and coatings, as well as ring tension, are all optimized for reduced friction and extended life in each application. The compression rings feature a barrel-faced contact area for more efficient compression and CNC-controlled gap chamfer to optimize compression and reduce blow-by. Intermediate rings have a reverse twist design for better groove side sealing, and taper race machining to enhance contact. The CP-20 oil ring assemblies feature a 20 degree ear angle, an exclusive feature that provides the best possible side seal against the cylinder wall, and a special chemical polish on the oil ring expander offers enhanced oil drain back. Mahle Original piston ring sets provide unmatched quality and ease of installation, making them the rings of choice for today's engine builders.

4.75 out of 5 stars ( 57 )

$101.99

Kanter Main Bearings

Kanter Auto main bearings are available for a wide range of classic vehicles, including many Buick, Chevy, Oldsmobile, Pontiac, DeSoto, Plymouth, Dodge, Edsel, Ford, Mercury, Studebaker, GMC, Hudson, Cadillac, Lincoln, LaSalle, American Motors, Nash, and Jeep models. Main bearings hold the crankshaft in place within the engine block and allow it to rotate smoothly on a thin film of oil. Order the set recommended for your application. Product details: * The main bearings support the crankshaft as it rotates. * A thin film of oil flows between the rotating crankshaft and the bearing shells, preventing direct contact and reducing friction. * They are typically plain or journal bearings made with a steel backing and a thin lining of a bearing alloy. * The main function is to allow the crankshaft to spin with minimal wear and to absorb the tremendous forces generated by the engine. * Kanter Auto focuses on providing parts for older vehicles, including main bearings designed for specific makes and models from the classic and muscle car eras. They supply high-quality, precision-fit parts to help restore and maintain engine performance in these vehicles.

Not Yet Reviewed

$189.99

Enginetech Rebuilders Valves

For about the same cost of reclaiming valves, you can install brand new Enginetech Rebuilders valves. The purpose of these patented Enginetech Rebuilders valves is to help simplify engine rebuilding by salvaging worn cylinder heads and reducing the need for expensive parts like valve seats and springs. Designed with oversized heads and stems, and a lowered keeper groove, these specialized valves create a more efficient and cost-effective rebuild process. The Enginetech one-piece intake valves are made from HNV-3 high alloy valve steel (often used for exhaust valves). All of the valve stems are either triple chrome plated or gas nitrided. Enginetech even goes a step further and hardens every valve tip to 50HRC minimum. The Enginetech exhaust valves are also a one-piece design. All Rebuilder's exhaust valves are made from EV-8 or EV-12 stainless steel. Again, like their intake valves, all stems are triple chrome plated or gas nitrided. Wafer tips, hardened to 50RHc, are inertia welded to every tip. Select the valves you need for your engine rebuild.

Not Yet Reviewed

$109.99