Availability
ARP Pro Series cylinder head studs are cold-forged to ensure molecular integrity. They're heat-treated prior to thread rolling and machining. ARP Pro Series kits are also available with 12-point nuts, and all studs come complete with hardened parallel washers for an even load distribution and accurate torque readings. With hundreds of models ready to ship, these cylinder head fasteners can be ordered for virtually any style engine.
( 793 )
$173.99
—
$317.99
PRW cylinder head stud kits offer heavy-duty fasteners, along with 12-point nuts and washers for Ford Powerstroke engines. These replacement studs are machined from 4135 chromoly steel and finished with a black oxide. They provide superior clamping power, compared to the stock bolts—which will solve the problem of head gasket failure caused by increased cylinder pressure.
( 1 )
$269.96
Wagner Tuning Pro Series cylinder head stud kits replace the original bolts with high-strength Pro Series 18.8 stud bolts with a tensile strength of 1850 N/mm², and they do not need to be replaced after disassembly, but can be reused. Pro Series bolt threads are formed and not cut as is customary in the trade. By rolling the threads, the strength of the tooth flanks can be increased by around 30 percent. All Pro-Series products are supplied with a nickel coating or a burnished finish and are therefore protected against corrosion in the long term, even under the toughest conditions. Pro Series stud bolts have a hexagon socket drive on the head side for screwing in the stud bolts. Thanks to a cone on the engine block side of the stud, these are not supported on the thread flanks when the nuts are tightened, but in the bore of the thread in the engine block. This support protects the threads during frequent assembly of racing engines. Nuts and washers are included in each set, and they also have a tensile strength of 1850 N/mm². Select the kit designed for your vehicle in the finish you prefer best.
Not Yet Reviewed
$399.00
—
$999.00
ARP high performance cylinder head stud kits are precision centerless-ground and thread-rolled to Mil-S-8879 specs. A black oxide finish protects them from wear and corrosion, and ARP throws in hardened parallel washers for uniform load distribution and accurate torque readings. Keep your cylinders mounted securely with a set of ARP high performance cylinder head studs; order the hardware recommended for your year/make and engine application
( 34 )
$144.99
—
$272.99
Refresh your ride with these Kibblewhite valve guides. These valve guides are designed to meet or exceed manufacturer's specifications for quality and are constructed from only the finest materials available for the job. Their tight tolerances and superior material mean that these valve guides will outperform and outlast their stock equivalents, making them perfect for stock or performance rebuilds. Don't trust your engine's health to lesser components--upgrade to these Kibblewhite valve guides for peace of mind after your next build.
( 4 )
$22.22
—
$26.43
Mahle Original fasteners deliver the clamping force necessary to seal the combustion chambers, as well as the oil and coolant passages--even at extreme temperatures and pressures. On your next cylinder head reassembly, use bolts designed to exact specifications for the best sealing solution--Mahle Original head bolt kits.
( 35 )
$23.99
—
$88.99
Summit Bucks
Fel-Pro headbolt kits contain a complete set of the highest quality headbolts and hardened washers available. They're cold-formed to ensure molecular integrity, then heat-treated prior to thread rolling and machining. Reduced-diameter bolt heads eliminate the need for valvetrain removal and facilitate cylinder head re-torquing. The bolts are available in a variety of head styles for fitment on specific vehicle and cylinder head applications.
( 217 )
$27.99
—
$70.99
Beck/Arnley cylinder head fasteners are perfect for replacing your import's stripped, broken, or lost cylinder headbolts. Don't worry about what thread size or length you need--Beck/Arnley cylinder head fasteners are specifically made for each application, for an exact fit every time. Order the set needed for your vehicle.
( 4 )
$32.99
—
$34.99
Wagner Tuning Pro Series cylinder head stud upgrade kits replace the original bolts with high-strength Pro Series 18.8 stud bolts with a tensile strength of 1850 N/mm², and they do not need to be replaced after disassembly, but can be reused. This upgrade is necessary as the original cylinder head bolts elongate during operation and the cylinder head can lift off. Pro Series bolt threads are formed and not cut as is customary in the trade. By rolling the threads, the strength of the tooth flanks can be increased by around 30 percent. All Pro-Series products are supplied with a nickel coating or a burnished finish and are therefore protected against corrosion in the long term, even under the toughest conditions. Pro Series stud bolts have a hexagon socket drive on the head side for screwing in the stud bolts. Thanks to a cone on the engine block side of the stud, these are not supported on the thread flanks when the nuts are tightened, but in the bore of the thread in the engine block. This support protects the threads during frequent assembly of racing engines. Nuts and washers are included in each set, and they also have a tensile strength of 1850 N/mm². Select the kit designed for your vehicle in the finish you prefer best.
Not Yet Reviewed
$449.00
—
$849.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
