Availability
Chevrolet Performance rocker arm stands mount between the shaft and cylinder head for the correct rocker arm mounting position. These rocker arm stands are quality-made for a lifetime of service.
( 15 )
$62.99
Chevrolet Performance small block V8 or V6 rocker arms are available individually or in sets, and include stamped steel or aluminum rockers with mounting hardware.
( 15 )
$46.99
—
$124.84
Chevrolet Performance LSX 454 long block crate engines are built with an all-forged, super-tough rotating assembly and feature a pair of new deep-breathing LSX 6-bolt cylinder heads. They also come dressed with great looking, all-new orange powdercoated valve covers with an engraved LSX 454 logo. With a carburetor and high-flow Chevrolet Performance intake manifold (sold separately), these engines are good for about 627 hp and 586 lbs.-ft. of torque. Due to the number of application variations, the LSX 454 crate engines do not include an oil pan, and the valve covers do not include provisions for mounting the ignition coil brackets. Other specifications include: * 4.185 in. bore * 4.125 in. stroke * Cast iron LSX Series block with cross-bolted 6-bolt main caps * Forged steel crankshaft * Forged steel connecting rods * Forged aluminum 11.0:1 compression pistons * Hydraulic roller camshaft * 0.635 in. lift intake/0.635 in. lift exhaust, 236 intake/246 exhaust duration at .050 in. lift * Aluminum LSX-LS7 cylinder heads with 70cc chambers * 1.8:1 aluminum roller rocker arms * 58-tooth reluctor wheel
( 1 )
$16,836.20
Put an LS series engine in your musclecar. These Chevrolet Performance musclecar oil pan kits are designed to fit most 1955-85 GM front engine, rear-wheel drive factory V8 passenger cars. Features include: * 5 qt. capacity aluminum wet sump oil pan * Dipstick and tube * Gaskets * Pickup tube * Windage tray * All mounting hardware
( 144 )
$300.47
These CNC-machined aluminum Fast Burn cylinder heads from Chevrolet Performance are designed for 1958-2000 283-400 c.i.d. Chevy V8s. They quickly and completely burn the air/fuel mixture, ensuring higher cylinder pressure and more power. No additional porting is required--Chevrolet Performance Parts' cast-ported technology gives these heads maximum performance right out of the box. They're drilled and tapped for Vortec and raised port manifolds, they accept flange-mount or centerbolt-style valve covers, and will support in excess of 500 HP.
Not Yet Reviewed
$1,514.83
These oil filter adapters from Chevrolet Performance mount a spin-on cartridge oil filter. They contain a filter bypass valve.
( 40 )
$14.99
—
$68.99
Ensure that your alternator is mounted properly by using Chevrolet Performance alternator brackets. They're manufactured from durable materials and are precision-machined to fit your specific application. The brackets are available in different styles and designs, so you can choose the best fit for your alternator setup.
( 4 )
$100.99
Chevrolet Performance windage tray installation studs are designed to be used for mounting splash shields, which help aid in oil control and minimize oil slosh under hard breaking. Their chromoly alloy construction is cadmium plated for long-lasting durability and performance. When it comes to restoring your Chevy, no one makes genuine original matching parts for a perfect fit and finish like Chevrolet Performance.
( 6 )
$12.28
—
$35.99
Chevrolet Performance's ZZ632/1000 deluxe long block crate engines are their biggest and baddest big blocks! They start with a tall deck Sportsman Bowtie block and an all-forged roller assembly, then add a hydraulic roller camshaft and high-flow spread-port CNC-machined cylinder heads derived from Pro Stock racing technology. The RS-X design cylinder heads feature symmetrical ports to produce similar power from all eight cylinders. ZZ632 crate engines have a crank-trigger ignition system with coil-near-plug ignition coils mounted on a unique valley plate. Included is a pre-programmed, self-learning control system for precise fuel control and amazing output on premium pump gas. These big block engines reach peak power at 6,600 rpm and rev to a recommended maximum of 7,000 rpm. Technical specs: * Bore and stroke: 4.600 in. by 4.750 in. * Power is 1,004 hp at 6,600 rpm * Torque is 876 lbs.-ft. at 5,600 rpm * Cast iron block with 4-bolt mains * Forged 4340 steel crankshaft * Forged steel H-beam connecting rods * Forged aluminum 2618 alloy pistons * Aluminum high-rise single-plane intake manifold * Dominator 4500-style throttle body * 86 lb.-hr. fuel injectors * Billet steel hydraulic roller camshaft * Valve lift of 0.780 in. intake and 0.782 in. exhaust * Camshaft duration at 0.050 in. is 270 intake and 287 exhaust * Aluminum RS-X symmetrical spread-port cylinder heads with 70cc chambers * Titanium 2.450 in. intake/1.800 in. exhaust valves with a 5/16 in. stem * 58X reluctor crank-triggered, coil-near-plug ignition * Compression ratio of 12.0:1 * Forged aluminum shaft-mount roller rocker arms with 1.8:1 ratio * Aluminum water pump * Steel 8-quart oil pan * Recommended fuel: 93 octane or higher
( 2 )
$32,935.35
By combining the large-displacement and heavy-duty elements of the L8T 6.6L engine and a unique camshaft based off the Corvette Stingray's high-revving LT2 V-8, Chevrolet Performance engineers have created the all-new L8P 400 c.i.d. Performance crate engine. Rated at 523 hp and 543 lbs.-ft. of torque, it offers your project a unique and naturally aspirated combination of big-displacement torque and high-rpm horsepower. The L8T 6.6L foundation is the same high-strength, big-displacement engine found in the Silverado HD from 2020 to present day, featuring a forged steel crankshaft and high-strength components. Additional features such as oil-spray cooling for the pistons and a cast iron, long-skirt cylinder block with 6-bolt, cross-bolted main caps contribute to the engine's strength and durability. The new L8P builds on that with a unique, upgraded valvetrain featuring performance-oriented valves and springs, along with a unique camshaft that is based off the Corvette Stingray's LT2 engine. It has a non-active fuel management profile and more duration than the L8t's camshaft. It's the best of both engines: the largest displacement in the LT family and the power-building attributes of the Corvette camshaft. Put it to work in your project. Fast Facts: * Displacement: 400 cu. in. (6.6L) * Bore x Stroke: 4.06 in. x 3.86 in. * Crankshaft: Forged steel * Pistons: Hypereutectic aluminum * Compression ratio: 10.8:1 * Cylinder heads: Rectangular port D/I with 59.02cc chambers * Camshaft type: Billet steel hydraulic roller * Camshaft duration: 218 degree intake/231 degree exhaust at .050 in. * Fuel delivery: Direct injection with high-pressure pump * Horsepower: 523 at 5,800 rpm * Torque (lbs.-ft.): 543 at 4,800 rpm * Engine type: Gen V small block V-8 direct injection spark ignition * Block: Cast iron with 6-bolt no Dula main bearing caps * Connecting rods: Forged powder-metal * Valve lift (in.): 0.549 intake / 0.549 exhaust * Rocker arms: Investment cast roller trunnion * Rocker arm ratio: 1.8:1 * Intake manifold: Composite * Throttle body: 87mm diameter (single-bore) * Fuel delivery: High-pressure direct injection (2,175 psi / 150 bar) * Recommended fuel: Premium pump * Ignition system: Coil-on-plug * Maximum recommended RPM: 6,000 rpm * Reluctor wheel: 58X * Balanced: Internal * Note: Use with the new engine control kit, P/N 19435524, which includes a programmed controller, wire harness, pedal, oxygen sensors and mounts, MAD, fuel line pressure sensor and fuel pump power module. Flexplate P/N 12685003 must be purchased for these engines to be compatible with the 10-speed supermatic transmission. 10-speed supermatic transmission uses six bolts to attach the torque converter.
Not Yet Reviewed
$8,948.80
Chevrolet Performance ZZ6 EFI Turnkey crate engines build on more than 65 years of small block heritage and the legacy of the pioneering "ZZ" crate engine family to offer thoroughly modern performance balanced with traditional style. The engineers adapted a unique, electronically controlled port fuel injection system to the ZZ6 350, using an aluminum intake manifold that has the appearance of a carbureted intake. A fuel injection throttle body mounted in place of the carburetor allows a traditional air cleaner to be installed. The result is a great, traditional appearance and all the drivability advantage of EFI on the highway. A simple plug-and-play control system rounds out the package to get the engine running in your project without the need for third-party tuning. These Turnkey crate engine kits include the distributor and damper installed. The throttle body, air conditioning pump, alternator, single-belt front-end accessory drive kit, and more are also included. Installation notes: * Crate engine kit includes pre-programmed, self-learning control system * Comes with 12.750 in. externally balanced 153-tooth automatic transmission flexplate. Requires externally balanced flywheel for manual transmission. * Not intended for marine applications. SPECIFICATIONS: Engine Type: Chevy Small Block V8 420 hp at 5800 rpm 408 lb.-ft. at 4500 rpm Displacement (cu. in.): 350 Bore x Stroke (in.): 4.000 x 3.480 Block: Cast iron with 4-bolt main caps Crankshaft: Forged steel, shot peened Connecting Rods: Forged powdered metal Pistons: Hypereutectic aluminum Camshaft Type: Steel hydraulic roller Valve Lift (in.): .474 intake / .510 exhaust Camshaft Duration (at .050 in.): 208 degree intake / 221 degree exhaust Cylinder Heads: Fast Burn aluminum; 62cc chambers Valve Size (in.): 2.000 intake / 1.550 exhaust Compression ratio: 9.72:1 nominal Rocker Arms: Aluminum; roller-style Rocker Arm Ratio: 1.5:1 Recommended Fuel: Premium pump Ignition Timing: 36 degree total at 4,000 rpm Maximum Recommended RPM: 5,800 Balanced: External Flexplate: 12.750 in.
Not Yet Reviewed
$13,672.14
Chevrolet Performance Bowtie big block Chevy cast iron engine blocks are CNC-machined. The race-prepared blocks feature blind head and accessory mounting bolt holes, a deck configuration that enables the use of any big block Chevy cylinder head—and cylinder bores that may be safely bored to a 4.600 in. maximum diameter, while maintaining a .250 in. minimum cylinder wall thickness. These engine blocks differ from the production-machined Bowtie versions in certain areas; they start from raw castings and are not "conversions." They also use a rear seal adapter to convert the Gen V/VI one-piece rear main seal to a Mark IV type 2-piece seal that facilitates the use of a widely available Mark IV style crankshaft. The intermediate caps also feature 16 splayed outer bolts, which anchor the caps into the strongest section of the blocks and prevent bearing cap movement under high loads. The main oil gallery on these blocks is relocated and enlarged to a 9/16 in. diameter to allow increased oil flow through the block. These Bowtie blocks have inner head bolt bosses, which allow for better retention of the cylinder heads in high-horsepower applications when the cylinder heads "lift" from the blocks due to high cylinder pressures. Order the style and deck height preferred for your application.
( 5 )
$4,140.75
These Chevrolet Performance High Output crate engine cast iron cylinder heads are designed for use with the Gen V and Gen VI design, 454 big block V8 crate engines. They feature a 118cc open combustion chamber with 2.18 in. intake valves and 1.88 in. exhaust valves with rectangular intake ports. The cylinder heads use 3/8 in. rocker arm holes for standard stud-mount type rocker arms.
Not Yet Reviewed
$1,047.74
Chevrolet Performance factory replacement dipstick tubes are designed for use with your production GM engine block and aftermarket Chevrolet Performance Parts oil pan. They're manufactured from durable materials and install easily with no modifications. The dipstick tubes are available in more than a dozen configurations for vehicles from the 1960s and up. Order the model recommended for your application.
( 95 )
$24.99
Do away with those annoying oil leaks and add some style at the same time, with Chevrolet Performance diecast aluminum valve covers. The durable diecast construction resists warping and keeps its shape at the rails, for excellent gasket sealing. Most covers are available with smooth tops in polished or black crinkle painted finishes for small blocks, or black with brushed, shallow ribbed tops for big blocks. All diecast covers feature the famous Bowtie and Chevrolet script logos, and have a variety of breather hole configurations to suit nearly any application.
( 52 )
$201.99
—
$355.61
Chevrolet Performance oil pumps are offered for an extensive range of cars, trucks, vans, and SUVs. Made from high-quality materials by a name you trust, they're available in both wet and dry sump styles, as well as standard and high-volume. Order the oil pump model designed for fitment on your vehicle application.
( 9 )
$222.99
Chevrolet Performance supplies the performance parts needed, including these front cover bolts, to complete a successful build and to keep your vehicle going strong! Manufactured specifically for use in Chevy engines, the front cover bolts feature a built-in washer face with case-hardened serrations. The washer face and hex head design easily permit the use of a socket wrench for a quick and accurate installation. Chevrolet Performance offers engineered fastening solutions to suit your needs.
( 1 )
$1.99
Windage is the turbulent flow of air within the crankcase caused by rotation of the crankshaft. As rpm increases, so does windage. Chevrolet Performance windage trays reduce aeration of the oil from windage, permit rapid oil return, and protect from oil splash-back—resulting in more horsepower and improved oil control for your performance engine. Select the right windage tray for your specific vehicle and engine application; get more positive engine lubrication, and reclaim lost horsepower!
( 21 )
$32.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
