Availability
Showing In Stock Items. Show All 106 Items.
Doing any work on your ride is a lot easier and a whole lot more pleasant when you have the right tools for the job. Fragola Performance Systems hose test kits are one of those must-haves for your toolbox. These hose test kits from Fragola allow you to quickly test your -4 through -16 hose assemblies. Simply screw them into AN hose ends, pressurize them with your compressed air source, and submerge them into a water bath to look for bubbles. These aluminum line testers from Fragola are available individually or as complete kits, so you'll be prepared to check for leaks in any size hose.
( 20 )
$35.99
—
$123.99
More tolerant, more efficient, and 100 percent silicone—Mishimoto radiator hose kits offer a boost of performance and looks under your hood! Combining high-grade silicone and heat-resistant embedded fibers, Mishimoto hoses provide exceptional heat reduction, increased pressure tolerance, and a whole lot of satisfaction. Radiator hose kits are available for a wide range of makes and models in black, blue, red, and limited-edition orange (specific makes only) to enhance the appearance of your engine bay. Some models also include hose clamps. Upgrade the performance and style of your vehicle with superior Mishimoto radiator hose kits.
( 61 )
$152.95
—
$269.95
Summit Racing™ Pro LS Swap aluminum radiator and fan combo kits are available for most popular LS swap applications. The kits include a quality-constructed aluminum radiator to provide exceptional weight savings over stock equipment, fan shroud, and a radiator cap. The radiators come in a variety of configurations, each possessing their own unique combination of features, to work for the specific make and model vehicle that they're intended. Install one of these cooling aluminum radiator and fan combos in the front of the engine bay to neutralize the threat of overheating. Select the Pro LS Swap radiator and fan shroud combo designed for your application.
( 2 )
$859.99
—
$989.99
Summit Racing™ engine run stand radiator combo kits include the radiator, radiator hoses, and the clamps needed to install onto the engine—on one of our engine run stands (sold separately). Each kit has carefully been assembled to provide you with just the right components needed to work on your engine, from small block Fords to small block Chevy engines, and even LS engines, too! The components are available for a wide range of applications from the 1950s and up.
( 3 )
$312.93
There are many parts working together to keep your car engine from overheating. Summit Racing™ does the legwork for you to assemble them into complete cooling kits. You'll receive an aluminum downflow radiator with two rows of cooling fins, a plastic fan and aluminum shroud, thermostat, thermal fan switch kit, and radiator hoses and cap. Some replacement models also include a transmission cooler. Just match up the overall and core sizes of these Summit Racing™ complete cooling kits with the specs for your particular vehicle (certain cooling units are for Ford Mustang applications). As the go-to source for professional and everyday drivers--and restoration enthusiasts--for more than four decades, Summit Racing™ can be trusted to "keep things cool" beneath your hood!
Not Yet Reviewed
$549.99
Cold Case radiator conversion kits are frequently necessary when converting from a standard 3-row radiator to any heavy-duty 4-row or most aluminum radiators. The included brackets and insulators bolt to the bottom of the core support. The radiator rests on these two mounting points. Since a standard-duty car will often have smaller insulators on the top brackets, where applicable, any required extra rubber insulators are included for the upper brackets.
( 4 )
$44.54
—
$75.54
Don't allow your truck to fall victim to factory cooler clogs and failure--bulletproof its engine with Mishimoto coolant filter kits. These kits are designed and engineered to filter solid particles left over from casting the engine, so as to help extend the life of your oil cooler, water pump, EGR cooler, and other critical components. These 6.0L coolant filtration systems are routed parallel to the flow path of your coolant system and allow a small amount of coolant to be filtered with each pass--an ideal location for easily removing the filter. These coolant filter kits include an application-specific mounting bracket to mount a precision CNC-machined aluminum filter mount and Wix coolant filter to the passenger side radiator support area, and two application-specific silicone hoses in your choice of black, red, or blue to complement any engine bay. Ball valve shut-offs are also included.
( 8 )
$149.95
—
$215.95
Cold Case offers radiator support module kits for a variety of applications, including 1960s era Camaro LS engine swaps. Each module comes fully assembled and ready to bolt into your vehicle. They consist of an aluminum radiator support, big 1.25 in. tube dual-core crossflow radiator, two 3600 cfm fans/shroud combination, billet cap, and billet overflow tank. These units are very popular with high-tech, high horsepower builds in which maximum cooling is a must. Available in either standard Chevrolet outlet configurations or LS outlet configurations, they're 100 percent TIG-welded and ready to paint or polish. Radiator support module features: * Extra forward design will clear big block and LS front drives * Brushed aluminum finish * 2 row design with 1.25" tubes * Includes dual 14 in. 3600 cfm fans and shroud combination setup * Easy to install even in finished cars * Optional AC condenser and electronic fan controller upgrades available
( 5 )
$2,299.54
—
$2,671.54
Bob Drake offers radiator mounting hardware kits for a variety of Ford cars and trucks from the 1930s and '40s. These replacement bolt and spring kits are very important to the life of your radiator, as they provide an absorbing action for road shock. Available in black coated steel or polished stainless steel, each kit includes two bolts, two springs, two pads, and two nuts.
Not Yet Reviewed
$29.99
Anyone that's been around auto restoration for awhile can see the need for sheet metal replacement parts like fenders and quarter panels. But it takes a company run by actual car restorers to really know what's required in every area, and then make those parts to the original specifications. Goodmark radiator support bushing hardware kits are specifically designed to mount your OE-style radiator and bushings. They are faithful reproductions of the original parts, manufactured using high-quality materials that meet or exceed OEM specifications to ensure long lasting durability and performance. The kits are available for hundreds of vehicles; order the model recommended for your application.
( 1 )
$35.99
—
$86.99
Competition Engineering radiator mounting kits are designed to help mount the popular Volkswagon Scirocco-style radiators or any aftermarket aluminum radiator with the VW Scirocco mounting pattern. These radiator mounting kits are constructed from high-quality steel for superior performance and include all necessary hardware.
Not Yet Reviewed
$88.99
CA offers radiator support mounting kits for a variety of applications, including many Chevy Corvette models from the 1950s and '60s. These brackets, plates, and hardware are manufactured from factory materials and specifications to ensure proper fitment and long-lasting performance. Each part meets or exceeds OE quality standards.
Not Yet Reviewed
$31.99
Flex-A-Lite developed these zinc anode kits to be installed as a replacement for the drain petcock in radiators equipped with a 1/4 in. NPT bushing welded into the tank (they can be installed in any 1/4 in. NPT hole that is available in the cooling system). For years anodes have been used in heavy-duty and marine applications to protect the cooling systems and its many components from damage due to electrolysis. Flex-A-Lite now brings this protection to you. Today's cars and trucks have many aluminum parts and parts made in combination with aluminum alloy. Aluminum parts may disintegrate from electrolysis in the cooling system. Installing a Flex-A-Lite zinc anode will protect your cooling system from galvanic action by "eating" the zinc rather than your cooling system. Cheap, effective insurance.
( 5 )
$25.99
Anytime you lose or drain coolant from your cooling system, you'll need to bleed the air out of it for proper operation. Dorman coolant air bleeder kits are available for a variety of applications. They'll keep your thermostat opening properly by preventing air from disrupting the coolant flow.
( 3 )
$11.99
Be Cool dual electric fan wiring kits are designed to wire a dual fan to your vehicle. They include a 50 amp waterproof-style relay, a fusible link, a wiring harness, wire connectors, and a detailed instruction sheet. If you need to control the fan manually, the required switch is sold separately.
( 9 )
$1,399.99
Cold-Case performance aluminum radiators are available and affordable for all. These high-quality, tube-and-fin performance radiators are true OE styles for most applications. Each Cold-Case design distributes fluid more evenly, eliminating hot and cold spots. Also, the massive cores take up the entire width of their tanks, so you get the most efficient cooling possible. The radiators drop-in without modifications needed (on most) and look original. Plus, Cold-Case stands behind its quality and research with a limited lifetime warranty on their products. All Cold-Case radiators feature: * Lightweight, efficient aluminum construction * 100 percent TIG-welded * Internally welded filler necks offer a clean, factory look * Two oversized cooling rows for increased capacity * 1 in. to 1 1/4 in. tubes for higher volume * Works with factory filler cap * Includes OEM-style petcock * 42.7 percent lighter than comparable copper radiators * 30 percent thicker materials than no-name aluminum radiators * 60-day COOL guarantee
( 655 )
$415.54
—
$816.54
Cool just got better! Cold-Case performance aluminum radiator modules bundle performance components for the most efficient cooling available. They've packaged their high-quality radiators with their exact fit shrouds and electric fans to deliver the best fit with an original look, an easy install, and effective cooling at an affordable price. Order the universal or application-specific model best suited for fitment in your engine bay. All Cold-Case radiator modules feature: * OEM-stamped, fully polished tanks * Aluminum shroud * Electric fan(s) * Correct OEM fitment * Lightweight, efficient aluminum construction * 100 percent TIG-welded * Internally welded filler necks offer a clean, factory look * Two oversized cooling rows for increased capacity * 1 in. to 1 1/4 in. tubes for higher volume * Works with factory filler cap * Includes OEM-style petcock * 42.7 percent lighter than comparable copper radiators * 30 percent thicker materials than no-name aluminum radiators * 60-day COOL guarantee
( 193 )
$588.54
—
$816.54
Griffin Performance Fit combos offer the right fit with the right performance--and the right price! These high performance combos deliver cooling capability for extreme horsepower mixed with modern styling, do-it-yourself installation, and American craftsmanship. In these perfect combinations, Griffin packages their lightweight aluminum radiators constructed with 1.25 or 1.50 in. induction-welded MegaCool tubing, high performance electric fans, hand-formed aluminum shrouds, wiring harnesses, and radiator caps for a complete install. Choose the style and size needed to equip your ride with the ideal solution for engine temperature control--Griffin Performance Fit combos. * Griffin Performance Fit radiator combos may require modifications for installation. * See Griffin Exact Fit radiator combos for installation with no modifications.
( 237 )
$831.00
—
$1,663.00
Be Cool factory fit modules provide drop-in convenience, plus the capability of keeping engines up to 1,000 hp (depending on your application) running at the proper temperature! These modules feature Be Cool's factory fit radiator that has two rows of 1 in. tubes to reduce coolant temperatures, a billet filler neck, a drain petcock, and .080 in. wall hand-fabricated aluminum tanks. You can choose either a natural finish or kick it up a notch with the polished finish and dress your engine compartment with shiny performance. Be Cool offers hundreds of models and options for fitment on a wide range of vehicles. Most module kits include a new aluminum radiator, electric fan(s) with mounting brackets, a Be Cool radiator cap, an overflow catch can, and a fan wiring kit.
( 88 )
$1,199.99
—
$3,999.99
DeWitts LSX modified radiator modules are designed to fit into the stock mounting and use the factory connections when installing an LS engine. They're manufactured and furnace-brazed in DeWitts' own furnace. The cores feature two rows of cooling tubes, a serpentine fin, and are epoxy-free. The radiators' press-formed end tanks are manually TIG-welded by expert craftsmen, providing the ultimate in strength and appearance. Included is an aluminum shroud with a Spal electric fan mounting in position, one wire harness, and a temperature switch. DeWitts LSX modified radiator modules are available with a standard finish, an exclusive black ice epoxy coat for a great OEM look, or polished. Over a hundred models are available (crossflow or downflow) for vehicles from the 1960s and '70s. They can also be ordered with a built-in transmission cooler for your automatic equipped vehicle.
( 17 )
$1,531.99
—
$1,987.99
PWR North America OE fit radiator modules offer you the latest in aluminum core designs for optimum cooling performance. With features like Spal fans, fluid coolers, unique fan mounting, and an exclusive upper soft mounting system, the PWR North America OE fit radiator modules can't be beat for performance and simplicity. These PWR radiator modules will lower oil temperatures better than any air to oil cooler! PWR's OE fit radiator modules are available in a range of applications to meet your specific cooling needs.
Not Yet Reviewed
$1,915.00
—
$2,429.00
Griffin Exact Fit radiator combos are the perfect pairing to take the "scary" out of electric fans! Exact Fit combos deliver Griffin's high-quality aluminum OEM fit and style radiators. They're constructed with MaxCool or ExtremeCool tubing, hand-formed aluminum shrouds, and performance electric fans. These units are easy to install, provide the best factory appearance, and fit your ride with out-of-the-box affordable performance cooling. Want to switch to electric fans? American-made Griffin Exact Fit radiator combos provide you with the perfect solution without any guesswork. Order the package designed for your specific vehicle.
( 90 )
$676.00
—
$1,750.00
Be Cool Extreme modules offer show-stopping looks and performance for your resto classic! If you want more bling than Be Cool Show & Go modules, their Extreme radiators provide the ultimate in American-made brilliance. They're available in a natural aluminum finish, or in show-polished assemblies with every component chromed or polished—to deliver extreme looks to your special ride. And their performance is, of course, super-cool! Be Cool Extreme module features: * Performance-grade dual 1 in. core polished radiator * Chrome plated high-torque fans with billet Extreme logo motor covers * Stainless steel electric and/or aluminum fan mounting brackets * Diamond-cut aluminum vented coolant recovery tank with Extreme logo * Machined aluminum Sure-Grip radiator cap with embossed emblem * Wiring harness with temperature control sending unit and 40 amp relays * Various radiator style options, including crossflow and downflow
( 7 )
$2,399.99
—
$5,199.99
AFCO Racing dragster/roadster radiators will help to maximize your engine cooling efforts. Models are available in various thicknesses and finishes, with or without a fan, and other options to suit different vehicle applications. Features include: * All-aluminum, furnace-brazed design * Sturdy 100 percent TIG welding * Single-row 1.50 in. tubes for optimum cooling performance * 1,100 cfm electric fan bolted to an aluminum shroud * On/off switch * Four mounting bosses and two 3/4 in. NPT female inlets for your radiator hoses
( 3 )
$849.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
