Availability
Showing In Stock Items. Show All 52 Items.
Hayden Rapid-Cool transmission oil coolers take the heat, so your vehicle won't! Over 14-million transmissions fail every year, and 9 out of 10 are from overheating. Rapid-Cool's unique plate and fin design combines cooling expertise and space efficiency; multiple sizes are available. Their patented internal turbulation provides better heat transfer. Lower your operating temps with a pioneer in cooling: Hayden!
( 162 )
$40.99
—
$126.99
Banks Power oil cooler upgrade kits improve heat reduction and performance of your Duramax engine. At the heart of each kit is GM's 2020 Duramax L5P oil cooler, rejecting heat better at the factory-rated 450 hp when tested against the earlier units, a difference that becomes even more apparent at higher engine speed and load--the higher the horsepower, the greater the improvement. Additional cooling plates and improved oil flow increase the available surface area utilized for heat transfer, shedding more BTUs of heat while maintaining proper oil pressure. Hardware, gaskets, and an AMSOIL EAO17 oil filter are included, as well as a pre-installed 1/8 in. NPT port for oil temperature/pressure sensors. Banks Power chooses to include an Amsoil EAO17 oil filter for its superior filtration properties and low oil pressure loss, exceeding OEM filtration specs with 99 percent efficiency at 20 microns. Key features: * Cools 31 percent or better * More cooling plates for better heat rejection * Increased cooling stack surface area * Pre-installed 1/8 in. NPT sensor port for temperature or pressure
( 2 )
$549.00
Hayden Rapid-Cool transmission oil coolers with thermal bypass are ideal for colder climates. With their patented internal pressure bypass design, they will help your transmission reach optimum operating temperature quickly by routing the fluid through the bypass channel of the cooler until fluid temperature increases. Reaching operating temperatures faster improves fuel economy and reduces friction of internal components. Hayden's design incorporates an integrated valve that eliminates the need for external valves and additional plumbing at installation. Features and benefits: * Bi-directional flow * 33 percent more efficient than traditional coolers * High efficiency louvered fins and special oil turbulators * 100 percent brazed aluminum construction offer superior strength and reliability * Available in sizes to fit a wide range of applications from compact cars to Class "A" motorhomes * All cooler brackets come pre-drilled for easy mounting * All hardware necessary for installation * 100 percent pressure-tested at the factory ensuring quality and performance
( 11 )
$54.99
—
$72.99
Hayden Automotive offers fluid coolers in a variety of sizes and materials. These units help to extend the life of your vehicle by lowering operating temperatures. Coolers are available for many types of fluids, including transmission, hydraulic, and power steering; as well as engine coolant, diesel fluid, and engine and differential oil. Order the universal or vehicle-specific model needed for your application.
( 170 )
$22.99
—
$172.99
Enthusiasts who push their high performance cars to the limit understand the importance of keeping their oil temperatures low to prevent damage, or even seizure of the engine. Mishimoto oil cooler kits are designed to extend the life of your engine by ensuring that your essential high-wear engine components, such as piston rings, skirts, and cam bearings, are sufficiently lubricated with cooler oil. The kits include a durable aluminum oil cooler, stainless steel braided hose lines, fittings, and all necessary adapters. Models are also available to cool transmission oil/fluid. Order the universal or vehicle-specific cooler that's best suited for your application.
( 43 )
$238.95
—
$1,200.95
Designed for high performance racing or driving applications, these Derale Performance stacked plate engine oil coolers offer maximum heat extraction. They are designed to keep the oil in the correct temperature range and extend the life of the engine.
Not Yet Reviewed
$245.41
Cover your oil cooler outlet with Summit Racing™ oil cooler block-off plates. Our covers are machined from billet aluminum and are clear anodized for added durability and looks. They are available with or without ports and include mounting hardware.
( 6 )
$26.99
Power steering oil coolers remove destructive heat generated within the power steering systems of your high performance vehicles. And that's where Four Seasons power steering oil cooler installation kits come into play. These kits are designed to prolong the life of your system's pump, hoses, and seals, and include an oil hose and all necessary hardware for the installation.
( 13 )
$30.99
These Hayden Automotive fluid cooler mounting kits are designed for mounting a transmission cooler. They come available in either plastic or steel and include all necessary mounts and hardware.
( 7 )
$16.99
—
$21.99
Keep your transmission healthy with Four Seasons Ultra-Cool transmission oil coolers. The aluminum tube and fin oil coolers feed your system cool oil, protecting it from overheating and giving it the strength to climb, tow, and tackle stop-and-go city driving. Four Seasons transmission oil coolers offer your transmission efficient performance and protection. Be good to your transmission--give it a regular dose of cool oil from Four Seasons Ultra-Cool transmission oil coolers.
( 10 )
$28.99
—
$36.99
BladeRunner oil coolers from aFe are the next generation in oil cooler technology. The aFe BladeRunner oil coolers utilize durable, brazed, all-aluminum construction that allows for greater efficiency and lower-pressure drop than a standard tube-fin design. They are available in several different universal configurations, as well as vehicle specific kits. The kits make installation simple with aluminum universal mounting brackets, stainless steel hardware, and leak-proof AN connections. The vehicle specific kits include all necessary hardware for the removal and replacement of the stock oil cooler. Order the BladeRunner oil cooler suited to fit your needs.
Not Yet Reviewed
$403.20
—
$523.95
Pacific Performance Engineering offers automatic transmission fluid bypass valves for a variety of applications. The OEM part has restrictive internal passages; and when the OEM valve fails in the open position, transmission fluid doesn't reach your cooler. This can be caused by mechanical failure or debris. The result of stock valve failure can cause the transmission to dangerously overheat. Without properly cooled transmission fluid, the demands of towing and rigorous stop-and-go driving conditions shorten the life of transmission components. This PPE bypass valve eliminates the mechanical valve—which maximizes fluid flow from the transmission cooler. For further protection, a Neodymium magnet-equipped service plug has been added. The removable plug traps ferrous debris and can be accessed to remove particles from the system. The factory part does not have this feature. Additional notes: * Billet aluminum construction * Neodymium magnet-equipped service plug with O-ring * Easy to install * Limited lifetime warranty
( 17 )
$71.99
Completely re-engineered, these RevMax transmission cooler thermostatic bypass upgrades are a direct bolt-in replacement. No lines are cut, nothing is altered. Simply disconnect your old lines and install them onto your new RevMax bypass. Utilizing RevMax's ZeroStat Technology, these billet 6061 aluminum cooler thermostatic bypass upgrade modules completely remove the orifice restriction for full cooler flow all the time. This equates to lower operating temperatures and helps to prolong the transmission's life. Order the model for your application. Features and benefits: * RevMax's ZeroStat patented technology provides increase in cooler flow due to the elimination of the orifice bottleneck located in the factory part * Direct bolt-in replacement—no lines are cut, nothing is altered, simply disconnect your old lines, and install them into the RevMax new bypass * There is no thermal controlled bypass valve which can fail and cause lack of cooler flow and complete transmission destruction * Instead of closing off cooler flow when the transmission is cold and making your transmission generate unneeded heat that is hard to shed later; RevMax bypass allows your cooler to immediately begin cooling transmission and not waiting for it to get hot, just to try to cool it later * You cannot properly flush your cooler lines without the aid of a hot flush machine that can get hot enough to open the bypass valve up but with the RevMax bypass upgrade you can use room temperature fluid to clean out your cooler anytime you wish without any special tools! * Moules with integral aluminum cooling fins aid in passive cooling of the block and fluid
( 2 )
$99.00
The Ford F-150 is renowned for being incredibly capable. With up to 12,000 lbs. of towing capacity, it is certainly no slouch. But every powertrain has its limits. With a Mishimoto F-150 transmission fluid cooler, you'll be able to push those limits knowing that your transmission is protected. Mishimoto F-150 transmission fluid coolers are direct-fit units featuring tube-and fin construction that will add significant cooling potential with an increased core volume and greater fluid capacity. Heavy loads are no match for a Ford F-150 equipped with the maximum cooling and flow of a Mishimoto transmission cooler.
( 2 )
$443.95
Improved Racing performance oil cooler kits add massive cooling capacity under your hood. Oil temperatures in track conditions often reach as high as 300 degrees F with the factory setups. These coolers will lower peak oil temps by as much as 30 to 50 degrees F. And—the kits are not only essential for track use, but also perfectly streetable! A built-in thermostat allows engine oil to reach safe operating temperatures much faster than the factory cooling systems. Constructed from plate aluminum, the bolt-on coolers are available for a variety of applications—including Corvettes from 2005 and up.
Not Yet Reviewed
$1,199.00
Four Seasons Rapid-Cool transmission oil coolers are compatible with OEM cooler systems and 100 percent pressure-tested to 150 psi for quality assurance. They're engineered to provide years of trouble-free operation, backed by over 50 years of mobile A/C experience. The coolers are available in different sizes and fin quantities. Fix it once and fix it right with a Four Seasons Rapid-Cool transmission oil cooler.
( 4 )
$64.99
ACDelco power steering fluid coolers are GM-recommended heat exchangers. These replacement units transfer heat and prevent the fluid from getting too hot, thereby increasing longevity of components. The fluid coolers are manufactured to fit specific GM vehicles, providing the same performance, durability, and service life you expect from General Motors. Order the model designed for your application.
( 5 )
$135.99
BD Diesel Xtruded transmission oil coolers use the same high-efficiency micro-extruded bar technology that is in the BD Diesel air-to-air charge coolers, providing 22 percent more cooling over similar designs. Their 200 micro-extruded passages provide a large surface area to transfer heat for external airflow cooling, while their turbulent oil design promotes more complete cooling. They feature large 5/8 in. ports to prevent inlet/outlet restriction and furnace-brazed rails that have been tested to 300 psi of pressure. Their thermostatically controlled 80 watt, 10 in., 800 cfm electric fan offers automatic oil temperature control. The BD Diesel Xtruded transmission oil coolers are available to accommodate 5/16 in., 3/8 in., 1/2 in., or 5/8 in. transmission cooler lines and come complete with all fittings, clamps, hoses, a wiring harness with a relay and fuse, and mounting hardware. And, you can build your own bracket kit for an easier installation.
Not Yet Reviewed
$735.95
Improved Racing oil cooler adapter gaskets not only exceed OE specifications, but also your own performance expectations. The gaskets feature aluminum construction with edge-bonded Viton® rubber seals, instead of silicone, for improved durability over the factory gaskets when exposed to engine oil. Create an efficient seal that will perform beyond demands; choose Improved Racing oil cooler adapter gaskets.
( 1 )
$4.99
Long live your transmission! Heat is the enemy--but with PPE performance transmission coolers on the frontlines, high temperatures don't stand a chance of breaching their prey. Pacific Performance Engineering aluminum coolers feature 60 percent more surface area to lower your rig's fluid temperatures up to 30 degrees over stock. Plus, they're bolt-on replacements and they retain the use of your existing factory oil lines, so installation is pretty straightforward.
( 30 )
$350.99
With automatic transmissions, performance and longevity are reliant upon temperature. Reducing internal heat eliminates the chance of overheating fluids, which causes viscosity breakdown and transmission strain. Therefore, a cooler running transmission will last longer. Help protect your transmission on the street and at the strip with Stillen transmission cooler kits. Each kit includes all the necessary adapters, fittings, and hoses you will need for installation. Select the kit designed for your vehicle. Features: * Increases transmission fluid capacity * Helps prevent transmission fluid from overheating * Helps extend the life of your transmission * Bolt-on installation--instructions supplied
Not Yet Reviewed
$333.81
Clearance
REACH Cooling is a global leader in the manufacture and distribution of aftermarket cooling products for automotive, heavy truck, and industrial applications. Their wide product range covers more than 95 percent of popular automotive and light trucks. REACH offers aluminum engine oil coolers in a variety of styles and sizes. Order the replacement model recommended for your vehicle.
Not Yet Reviewed
$282.99
$51.50
—
$168.50
Upgrade your transmission cooling with a Fluidyne high performance bar and plate transmission fluid cooler. Designed for the 2020-24 GM 6.6L Duramax, these coolers offer 4x the heat dissipation of factory models, ensuring your transmission runs cooler and more efficiently. With the densest fins per inch in the market, Fluidyne coolers provide superior cooling performance. All internal splitter plates are fully welded, preventing fluid contamination between the cold and hot side fluids. Built from aerospace-grade aluminum with bar plate construction, each unit offers maximum cooling with minimal pressure drop. These direct replacements use existing factory mounts for easy installation. Additional details: * Enhanced heat dissipation * Direct bolt in replacement * Densest fins per inch * Proprietary fin design for highest performance * Powdercoated with a proprietary heat-wicking compound * Over 4x the heat exchanging capacity compared to the stock cooler
Not Yet Reviewed
$499.00
CSF fluid coolers are part of a broad range that includes several designed, developed, and track proven in collaboration with BMW tuning specialists and parts manufacturers. Available coolers include: * Dual-pass, race-spec, DCT transmission coolers--a number are plug-and-play and include oil-line connections, mounting brackets, shrouds, and ducting * All-aluminum, controlled atmosphere brazed (CAB) dual-pass, plug-and-play, power steering coolers * Dual-pass, all-aluminum, race-spec engine oil coolers with cast end-tanks * Advanced and unique, dual-fluid, heavy-duty oil coolers with built-in fittings and included SPAL fan and sealed shroud. Additional features and benefits of CSF fluid coolers include: * Drop-in fit coolers require no modifications to install; They fit OE bumpers and accept factory oil-line connections, mounting brackets, shrouds, and ducts … even aftermarket splitters * Many feature dual-pass, high-performance cores that replace OEM single-pass designs for maximum surface area and flow * OE low-efficiency, mechanically bonded cores replaced with CAB-brazed, high-efficiency, turbulated, heavy-duty, bar and plate design cores for the most reliable and durable coolers available (on specific applications) * High-density, multi-louvered fin design with more surface area than OE units * Where applicable, fully TIG-welded end-tanks vs. OE mechanically jointed and tack-welded tanks for superior reliability and durability * Select applications include CSF's A/C condenser technology using super-high pressure, multi-channel micro-tubes * Lab tested to be more efficient than OEM coolers
( 2 )
$81.99
—
$599.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
