Availability
Showing In Stock Items. Show All 133 Items.
In the event of a sending unit failure look to these Summit Racing™ electric fan thermostat sending units. Available in two temperature ranges to suit your needs.
( 117 )
$29.99
—
$32.99
These Summit Racing™ electric fan thermostat kits are designed to allow your electric fan to turn off and on at certain temperatures. They are available for single or dual fan applications and include all necessary wiring, relays, circuit breakers, sending units, and hardware for installation. Each kit includes detailed instructions.
( 144 )
$48.99
These FAN-THOM II electric fan relay kits come with a threaded thermostat that screws into the engine block or intake manifold for a clean and professional look. These kits provide protection for your electric fans and wire harnesses. They supply constant voltage, protect against voltage and amperage spikes, and prevent the fan from back-feeding voltage through your vehicle's wire harnesses. These kits include: * SPST 40 amp relay * 30 amp circuit breaker * Thermostatic switch * Relay base with harness * Crimp-on terminals * Mounting hardware
( 77 )
$45.99
Derale inline fan thermostats allow automatic electric fan controllers to attach to the inlet ports of the oil coolers. They activate the electric fans when fluid temperatures reach 180 degrees F, and shut off the fans when fluid temperatures reach 165 degrees F. For top-quality underhood cooling accessories, trust the expertise of Derale Performance.
( 85 )
$47.87
Flex-A-Lite belt-driven fan spacers feature large bearing surfaces and are machined to a soft radius. They are required for use with Flex-A-Lite fans. Why? They reduce point-loading, which is the most common cause of stress cracking on the fan center star. These machined aluminum spacers are available individually or in kits with the necessary bolts and washers for a complete install.
( 20 )
$24.99
—
$36.99
Spal electric fan replacement electronic sending units are designed for use with their temperature control modules. They are manufactured from high-quality materials and help you control your fan. Restore your electric fan operation with Spal replacement sending units.
( 95 )
$44.94
Derale single-stage fan controllers can be installed in the radiator or a threaded location. They activate fans at a specific temperature and turn them off at a preset temperature. The controllers are available for single or dual fans, and specific types will work on vehicles equipped with air conditioning. For top-quality underhood cooling accessories, trust the expertise of Derale Performance.
( 114 )
$27.56
—
$42.98
Painless Performance temperature sending units are designed to allow your electric fan to turn on and off at a desired temperature. These switches are recommended for all electric fan installations and are available in several different temperature ranges. These Painless Performance temperature sending units are sure to keep your engine cool and running at the temperature range of your choice.
( 88 )
$29.99
—
$30.99
Allstar 6-blade fans are heavy-duty to move volumes of air and keep your race engine cool. These "engine coolers" are available in steel or aluminum with a protective black finish and have a universal bolt pattern and a 5/8 in. pilot hole. Race engines need to be cooled to run better, because they get hot! Allstar 6-blade fans will keep your hot car cooled!
( 55 )
$43.99
—
$49.99
Derale Performance flex fan standard spacers feature extruded aluminum construction. Mounting hardware is included.
( 111 )
$23.53
—
$38.13
Spectre universal radiator fan shrouds are manufactured from chrome plated steel. They allow the fans to pull air through the entire core of the radiator, which results in improved fan efficiency.
( 89 )
$49.99
Make sure that your cooling fans turn off and on with Hayden electric fan control kits. These Hayden automotive electric fan kits are designed to allow your electric fan to turn off and on at certain temperatures. Hayden offers these electric fan kits for single or dual fan applications. All of these Hayden electric fan kits are compatible with their own fans and original equipment cooling fans. They include all necessary wiring, relays, circuit breakers, sending units, hardware for installation, and detailed instructions.
( 192 )
$26.99
—
$38.99
Keep your electric fan cooling properly with Maradyne replacement temperature sending units. They are available in different temperatures and connect easily to your wiring harness.
( 41 )
$26.02
—
$27.16
Proform brushless fans have a lot of power. If you'd like to turn them down a little, then pick up one of these Proform brushless electric fan controllers. These multi-speed controllers provide an easy manual way to control your Proform brushless electric fan. Installation is simple, just connect the controller to the Green wire of a Proform brushless fan and hook up the 12-volt (+) (-), and you're good to go! This is the multi-speed controller for the fan only. Proform brushless electric fan sold separately. Important Notes: If you'd like to have this controller in the driver's compartment, you will need to extend the wires. The controller is not weatherproof, so you will need to protect it if left under the hood.
( 1 )
$42.99
Flex-A-Lite offers mounting hardware for their Trimline fans. These replacement kits include four S-blade mounting feet. When servicing or installing Trimline engine cooling fans, the correct hardware will ensure a secure fit.
( 2 )
$20.99
Do you need a replacement fan clutch? These fan clutches by Hayden Automotive are manufactured to ensure performance and durability. Hayden offers thermal, non-thermal, and heavy-duty series fan clutches that meet strict factory guidelines. All Hayden Automotive fan clutches should only be used on the specific applications for which they are cataloged. Use of the wrong fan clutch may result in poor cooling, excess noise, reduced mileage, and/or fan clutch failure.
( 452 )
$27.99
—
$49.99
Reduce engine drag with Flex-A-Lite lightweight nylon mechanical fans. An inexpensive alternative to electric fans, clutch fans, and off-road type fans--they are so light, they won't put excess weight on your fan shaft and water pump. They're rated up to 8,000 rpm .
( 2 )
$37.99
—
$49.99
Vintage Air electric fan set-point temp switches are specially designed to allow your electric fan to turn on and off at a desired temperature. These switches are recommended for all electric fan installations and are available in several different temperature ranges. These Vintage Air electric fan set-point temp switches are sure to keep your ride's engine cool and running at the temperature range of your choice.
( 17 )
$49.99
Get closer to your radiator with fan spacer kits from Allstar Performance. They allow you to position your fan closer to your radiator or fan shroud and away from pulleys. Available in thicknesses from .5 in. to 3 in., Allstar black anodized aluminum fan spacers include a reducer bushing, bolts, and washers. Uniquely designed to work with 1.75 in. bolt circle flanges only, the 1.5 in. to 3 in. spacers remain bolted to the water pump while you're changing fans. Do you need some space from your pulleys? Distance your fan for a better fit and operation with Allstar fan spacer kits.
( 77 )
$27.99
—
$49.99
Scott Drake offers replacement fan shrouds for a variety of muscle car applications from the 1960s and '70s. They're available in different sizes and materials, with easy bolt-on installation. Fan shrouds are a cooling system accessory that help to facilitate cool air flowing throughout your engine bay. Order the model designed to fit your vehicle.
( 77 )
$41.60
A great look with perfect function—AFCO fan spacer kits will provide the optimum breathing room. Positioning your fan as close to your radiator as possible with proper clearance affords optimum cooling and trouble-free operation. These spacers are machined from billet aluminum and black anodized for durability and create an awesome look in your hotrod. The kits include the spacer, bolts, washers, and a steel reducer bushing. Complete your fan installation with confidence using these fan spacer kits by AFCO.
( 24 )
$37.99
—
$44.99
Effectively control your cooling system with Derale replacement electric fan thermostats. These single-stage thread-in units will activate your Derale fan controller as designed. They each feature a 6/32 in. stud. Get the right temperatures for the right performance with quality-made replacement electric fan thermostats from Derale Performance.
( 9 )
$28.65
Designed to fit the most popular cars and trucks, these Proform electric fans help to prevent overheating in stop-and-go traffic, increase gas mileage, and improve engine performance. They install in minutes with simple hand tools, and most are reversible (they mount in front or back of the radiator). Their ultra-thin design is perfect for hard-to-fit cramped locations. These fans feature a reinforced, glass-filled polypropylene blade and a plastic housing for minimized weight.
( 165 )
$39.99
—
$47.99
Summit Racing™ electric fan thermostat kits allow a wide range of temperature adjustments for your electric fan. These universal kits come with everything necessary for setting your fans to click on at the right temperature for your cooling system.
( 26 )
$46.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
