Availability
MotoRad remote engine oil thermostats open after the oil temperature is suitable, allowing oil to flow. These direct-fit replacements are manufactured with OEM quality materials, safety standards, and specifications to ensure proper fit and performance. They stand up to even the most demanding automotive cooling systems. Order the model recommended for your vehicle. Additional product details: * Original equipment design for longevity and worry-free performance * Consistent and precise response to cooling system needs * Meets or exceeds factory standards * 100 percent tested and calibrated
Not Yet Reviewed
$531.99
Enthusiasts who push their high performance cars to the limit understand the importance of keeping their oil temperatures low to prevent damage, or even seizure of the engine. Mishimoto oil cooler kits are designed to extend the life of your engine by ensuring that your essential high-wear engine components, such as piston rings, skirts, and cam bearings, are sufficiently lubricated with cooler oil. The kits include a durable aluminum oil cooler, stainless steel braided hose lines, fittings, and all necessary adapters. Models are also available to cool transmission oil/fluid. Order the universal or vehicle-specific cooler that's best suited for your application.
( 41 )
$500.95
—
$815.95
Banks Power oil cooler upgrade kits improve heat reduction and performance of your Duramax engine. At the heart of each kit is GM's 2020 Duramax L5P oil cooler, rejecting heat better at the factory-rated 450 hp when tested against the earlier units, a difference that becomes even more apparent at higher engine speed and load--the higher the horsepower, the greater the improvement. Additional cooling plates and improved oil flow increase the available surface area utilized for heat transfer, shedding more BTUs of heat while maintaining proper oil pressure. Hardware, gaskets, and an AMSOIL EAO17 oil filter are included, as well as a pre-installed 1/8 in. NPT port for oil temperature/pressure sensors. Banks Power chooses to include an Amsoil EAO17 oil filter for its superior filtration properties and low oil pressure loss, exceeding OEM filtration specs with 99 percent efficiency at 20 microns. Key features: * Cools 31 percent or better * More cooling plates for better heat rejection * Increased cooling stack surface area * Pre-installed 1/8 in. NPT sensor port for temperature or pressure
( 2 )
$549.00
BD Diesel Xtruded transmission oil coolers use the same high-efficiency micro-extruded bar technology that is in the BD Diesel air-to-air charge coolers, providing 22 percent more cooling over similar designs. Their 200 micro-extruded passages provide a large surface area to transfer heat for external airflow cooling, while their turbulent oil design promotes more complete cooling. They feature large 5/8 in. ports to prevent inlet/outlet restriction and furnace-brazed rails that have been tested to 300 psi of pressure. Their thermostatically controlled 80 watt, 10 in., 800 cfm electric fan offers automatic oil temperature control. The BD Diesel Xtruded transmission oil coolers are available to accommodate 5/16 in., 3/8 in., 1/2 in., or 5/8 in. transmission cooler lines and come complete with all fittings, clamps, hoses, a wiring harness with a relay and fuse, and mounting hardware. And, you can build your own bracket kit for an easier installation.
Not Yet Reviewed
$723.95
—
$735.95
Keeping oil temperatures down is essential to minimize wear and tear—and prolong the life of expensive powertrain components. A Fluidyne oil cooler with fan kit is one of the best ways to give your engine and transmission that protection. These efficient units are built to handle the most demanding conditions. They're fitted with 12 V high-flow fans for fast, efficient output. Order the size that's compatible with your vehicle application.
Not Yet Reviewed
$502.00
Mishimoto universal oil cooler kits are a cooler way to prevent overheating! Rising temperatures can breakdown oil leaving it unable to do its job. Keep temperatures in check with an auxiliary oil cooler kit like Mishimoto's to keep your engine properly lubricated with cooler oil preventing damage—or worse, seizure of the engine. Proper oil temperature regulation is key to extending and preserving the life of your stock or high performance engine. Applicable for most vehicles, these universal oil cooler kits include all key components for reducing oil temperatures and providing your engine with extra protection against oil degradation. Order the kit for your application.
Not Yet Reviewed
$524.95
—
$735.95
Earl's Performance UltraPro Fan Pack oil coolers are perfect for all your high performance applications. Designed and engineered to be durable, long lasting, and highly efficient with minimal pressure drop, UltraPro Fan Pack coolers are offered in several sizes and include premium cooling fan and shroud. Features include: * Premium quality, high performance stacked plate-style aluminum coolers * State-of-the-art brazing technology * Lightweight aluminum construction with black finish * Narrow, wide, and extra-wide widths available * -10 AN O-ring Boss female ports
Not Yet Reviewed
$749.95
On Sale
Earl's UltraPro oil coolers are perfect for all your high performance applications. Designed and engineered to be durable, long-lasting, and highly efficient with minimal pressure drop, UltraPro oil coolers are offered in several width and height options, as well as port sizes, cooling rows, and styles. Features include: * Premium quality, high performance stacked plate-style aluminum coolers * State-of-the-art brazing technology * Lightweight aluminum construction with black finish * Narrow, wide, and extra-wide widths available * Different heights with 7 to 60 cooling rows * -10 AN female ports or -16 AN male ports
( 4 )
$573.95
Perfect for the do-it-yourselfers, these Mishimoto LS1/LS2 front-sump race oil cooler kits will allow you to be creative and customize fitment on your highly modified LS vehicle. Perfect for turbocharged or supercharged drag vehicles, the 25-row coolers in these kits have the ability to drastically drop oil temperatures, making them the set-up you want for racing. Mishimoto kits include stacked-plate oil cooler, CNC-machined application-specific oil adapter, and universal 6 in. stainless steel braided oil lines. Features: * Designed for LS1/LS2 equipped vehicles with a front-sump * For custom or race set-ups * DIY-kit requires custom bracket fabrication * Proven to reduce oil temperatures by 65 degrees F (36 degrees C) * Cooler available in Sleek Silver or Stealth Black * Increases oil capacity by 1.0 qt. * Mishimoto Lifetime Warranty
Not Yet Reviewed
$705.95
On Sale
Greater performance and thousands of miles of engine life will be added by keeping a "cool" coating of oil on high-wear engine components, such as piston rings, piston skirts, cam bearings, and rod bearings. Stillen Setrab oil cooler kits for race or street offer a temperature reduction of 30 to 40 degrees F, ending the oil overheating condition and preventing a reduced power mode. They allow hot oil to be circulated and cooled outside of the motor through a high efficiency cooler. Stillen Setrab oil cooler kits are an absolute must for forced induction or track use. Select the kit designed for your vehicle. Features and benefits: * Increases oil capacity * Helps prevent engine oil from overheating * Swedish-made Setrab oil cooler core renowned for their excellent cooling abilities * Goodridge stainless steel lines, necessary fittings, hoses, and hardware * Vehicle-specific bracket * Thermostatic bypass plate prevents overcooling of oil
Not Yet Reviewed
$671.91
—
$679.18
$537.53
—
$543.34
Clearance
Run your Tesla Model 3 or Model Y cooler and longer when you order Unplugged Performance Enduro drive unit oil cooler and magnetic filters as direct replacements for the factory oil filters. They increase cooling capacity by utilizing an efficient radial-finned design, combined with an approximately 10 percent higher capacity enclosure. The oil coolers further safeguard your vehicle's motor life by employing dual magnetic media debris catchers to extract metal shavings from the drive unit, along with the uprated 5-micron filter. As a result, your drive unit runs cooler and cleaner with less metal debris. Set new local lap records with an assist from Unplugged Performance Enduro drive unit oil coolers!
Not Yet Reviewed
$794.99
$596.50
AFCO Racing deck-mount oil coolers are a versatile option for your fluid cooling needs! They're designed for use with a variety of fluids—including engine, transmission, and differential oil; and power steering, hydraulic, and transmission fluid. The units feature a double-pass design, cooling the fluid twice as it passes over the top and bottom half. Internal oil turbulators and louvered fins ensure unparalleled efficiency. Most AFCO Racing deck mount oil coolers have a 1 qt. capacity, a 1/2 in. FPT to accommodate an oil temperature sending unit, and they're available with 10 AN, 12 AN, or 16 AN inlets and outlets.
Not Yet Reviewed
$669.99
Don't let high engine temperatures set you back. The heat exchanger is typically plumbed inline between the radiator and the pump to cool the oil with the coldest water in the system. PWR North America oil to water heat exchanger coolers are commonly found in sports car, off-road, and high performance street rod installations. The addition of "plates in the stack" increases the oil cooling. PWR North America manufactures these units from high-quality materials, ensuring years of trouble-free cooling. PWR's oil to water heat exchanger coolers are available in multiple plate designs. Order the oil to water heat exchanger cooler designed for your application.
Not Yet Reviewed
$757.02
—
$810.30
Canton Racing oil cooler kits contain an oil cooler with mounting hardware, a billet aluminum sandwich adapter that mounts between the engine and the spin-on filter, 10 ft. of stainless steel braided hose, and all of the necessary fittings. They feature brazed aluminum construction and a high-flow, clog-resistant design.
( 1 )
$616.00
—
$640.00
Summit Bucks
ACDelco engine oil coolers are heat exchangers, and are GM-recommended replacements for your vehicle's original components. These units transfer heat to and from your engine oil to the engine coolant or ambient air. This helps keep the engine oil temperature within the desired operating range—which helps optimize engine efficiency and longevity. The engine oil coolers are manufactured to fit specific GM vehicles, providing the same performance, durability, and service life you expect from General Motors.
( 2 )
$538.99
—
$794.99
Do you need to replace your oil cooler without breaking the bank? Hot oil will shorten the life of any engine component. Dorman engine oil coolers provide efficient cooling and are manufactured using quality materials to ensure years of trouble-free performance. These units are available in a variety of sizes and configurations for fitment on specific vehicle and engine applications.
( 11 )
$634.95
On Sale
Cool just got better! Cold-Case performance aluminum radiator modules bundle performance components for the most efficient cooling available. They've packaged their high-quality radiators with their exact fit shrouds and electric fans to deliver the best fit with an original look, an easy install, and effective cooling at an affordable price. Order the universal or application-specific model best suited for fitment in your engine bay. All Cold-Case radiator modules feature: * OEM-stamped, fully polished tanks * Aluminum shroud * Electric fan(s) * Correct OEM fitment * Lightweight, efficient aluminum construction * 100 percent TIG-welded * Internally welded filler necks offer a clean, factory look * Two oversized cooling rows for increased capacity * 1 in. to 1 1/4 in. tubes for higher volume * Works with factory filler cap * Includes OEM-style petcock * 42.7 percent lighter than comparable copper radiators * 30 percent thicker materials than no-name aluminum radiators * 60-day COOL guarantee
( 192 )
$588.54
—
$664.54
$538.54
—
$614.54
Heat is the enemy of most major systems in a performance vehicle, especially the engine, transmission, and differential. As one of the top performing coolers in the Baja 1000 and Baja 500, the Fluidyne Enduro All-Season fluid coolers are used by top tier racing teams to tame their engine oil and transmission fluid heat. They have an 11 in. electric fan mounted directly to them, enclosed in shrouding that ensures maximum airflow through the cooler core, to deliver maximum cooling. Because they're self-contained, these coolers do not have to be situated in direct airflow. So, you can mount them in just about any remote location to cool engine oil, transmission fluid, or differential lube. In addition to the normal inlet and outlet fittings, they have threaded bosses to accommodate temperature sending units for inlet temperature, outlet temperature, or both. They also add two quarts of fluid to whatever system they're protecting, which further helps cooling.
( 2 )
$643.00
—
$737.00
CSF fluid coolers are part of a broad range that includes several designed, developed, and track proven in collaboration with BMW tuning specialists and parts manufacturers. Available coolers include: * Dual-pass, race-spec, DCT transmission coolers--a number are plug-and-play and include oil-line connections, mounting brackets, shrouds, and ducting * All-aluminum, controlled atmosphere brazed (CAB) dual-pass, plug-and-play, power steering coolers * Dual-pass, all-aluminum, race-spec engine oil coolers with cast end-tanks * Advanced and unique, dual-fluid, heavy-duty oil coolers with built-in fittings and included SPAL fan and sealed shroud. Additional features and benefits of CSF fluid coolers include: * Drop-in fit coolers require no modifications to install; They fit OE bumpers and accept factory oil-line connections, mounting brackets, shrouds, and ducts … even aftermarket splitters * Many feature dual-pass, high-performance cores that replace OEM single-pass designs for maximum surface area and flow * OE low-efficiency, mechanically bonded cores replaced with CAB-brazed, high-efficiency, turbulated, heavy-duty, bar and plate design cores for the most reliable and durable coolers available (on specific applications) * High-density, multi-louvered fin design with more surface area than OE units * Where applicable, fully TIG-welded end-tanks vs. OE mechanically jointed and tack-welded tanks for superior reliability and durability * Select applications include CSF's A/C condenser technology using super-high pressure, multi-channel micro-tubes * Lab tested to be more efficient than OEM coolers
( 2 )
$549.00
—
$899.00
Fluidyne fluid coolers are at their best when the heat is on. They set the standard in performance, reliability, and durability—but what else would you expect from one of only two companies authorized by NASCAR to supply their "Spec Rad"? The coolers are available in a variety of sizes and configurations for universal, direct fit, and specialty applications. Depending on model, features include: * Most are available in single-pass or double-pass configurations * CAB-brazed construction (no epoxy) * Extruded oval tubes and patented lanced offset flow turbulators * Most efficient coolers pound-for-pound on the market
( 5 )
$598.00
—
$730.00
Derale Hyper-Cool remote fluid coolers with fan kits provide the largest temperature drop of any fan-mounted cooler. Their unique fin and plate design maximizes heat dissipation and minimizes oil pressure drop, which is especially important on late model electronic overdrive transmission applications. The Derale Hyper-Cool remote fluid coolers have AN inlets and outlets and include hose barb adapters for standard rubber line. Rated at a whopping 30,000 GVW, the Derale Performance Hyper-Cool remote fluid coolers with fan make an excellent addition to your late model diesel truck.
( 86 )
$508.31
—
$566.97
On Sale
Cold-Case performance aluminum radiators are available and affordable for all. These high-quality, tube-and-fin performance radiators are true OE styles for most applications. Each Cold-Case design distributes fluid more evenly, eliminating hot and cold spots. Also, the massive cores take up the entire width of their tanks, so you get the most efficient cooling possible. The radiators drop-in without modifications needed (on most) and look original. Plus, Cold-Case stands behind its quality and research with a limited lifetime warranty on their products. All Cold-Case radiators feature: * Lightweight, efficient aluminum construction * 100 percent TIG-welded * Internally welded filler necks offer a clean, factory look * Two oversized cooling rows for increased capacity * 1 in. to 1 1/4 in. tubes for higher volume * Works with factory filler cap * Includes OEM-style petcock * 42.7 percent lighter than comparable copper radiators * 30 percent thicker materials than no-name aluminum radiators * 60-day COOL guarantee
( 648 )
$530.54
—
$702.54
$505.54
—
$677.54
CSF racing radiators feature the most advanced and efficient radiator cores in the industry. Offered for both vehicle-specific and universal applications, they use innovative tube and fin technologies with industry-leading testing methods to maximize airflow and heat dissipation. Specially engineered tubes in the shape of a "B" are carefully formed and then brazed over the seam. CSF is able to use thinner and lighter aluminum because this design is stronger than normal welded "O" shape tubes. With the inlet in the middle of a seam-brazed tube, the surface area of the tubes is increased approximately 15 percent over regular tubes. With CSF's B-tubes you get dual liquid laminar flow and the efficiency of two smaller tubes vs. one large tube in the same space. High-efficiency, multi-louvered fins are precisely aligned to maximize airflow through each radiator core. Fin specifications are carefully measured and calculated for each application, and tested for maximum heat rejection efficiency in CSF's wind-tunnel lab. CSF offers two all-aluminum end-tank designs to match any style and performance needs. CSF 7000 Series racing radiators have OE-style radial tanks that are flat, rounded, and welded together. Perfect for the customer who likes the sleek and smooth look, and wants to display the intricate welding. CSF deep-drawn end tanks are stamped to the same geometry of OE plastic end tanks. The only high performance manufacture to feature this advanced radiator technology; CSF deep-drawn end tanks feature less welding, and are generally considered the strongest tanks in the industry. Additional features of CSF racing radiators include: * Finished with CSF's Show-Stopper mirror polish process * CAD/CAM designed * Racing-style aluminum drain plug * Brazed in a controlled atmosphere brazing (CAB) furnace—the preferred process for aluminum * ISO 9001/9002 certification * Military-grade (special clad) aluminum used for tubes, fins, and headers * Plates and side brackets meet JIS 3003 specifications * Privately owned factories with full in-house tool rooms * CNC-machined fittings * TIG welded
( 36 )
$665.00
—
$695.00
Derale is proud to introduce their latest addition to the remote cooler lineup: Hi-Flow Racing remote fluid coolers! These tube-and-fin coolers are precision TIG-welded—and feature the most efficient tube design in the aftermarket, supporting up to 350 psi with minimal pressure drop. The electric fans are IP68 certified (water/dust proof) and designed to perform even under the most strenuous conditions. These coolers are the perfect choice for everything from drag racing to off-road driving! Additional features and benefits include: * Aircraft-grade aluminum cooler design * Dramatically extends engine or transmission life * Designed for puller applications * 20 gpm flow rate
( 7 )
$589.34
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
