Availability
Showing In Stock Items. Show All 18 Items.
Maximize cooling and minimize the dollars leaving your wallet with Summit Racing™ low-profile high cfm electric fans. The fans low-profile pusher or puller design make them an easy fit when clearance is an issue, and they'll move a lot of air to cool your setup efficiently. Fan motors are EMC Compliant, sealed and tested in accordance with DIN EN 60529, dust and water proof to IP68. Motors also have built in EMI protection with a resistor/capacitor to eliminate Electro-Magnetic Interference. Order the model for your application needs.
( 2 )
$123.99
—
$175.99
For street,strip, and offroad Flex-A-Lite Low Boy electric fans can give you back the horsepower and gas mileage that stock, engine-driven fans take away. Their slim, trim dimensions mean that they're ideal for applications with limited clearance and they're large enough to be used as either primary or auxiliary fans. Optional mounting brackets are recommended for off-road or other heavy-impact uses.
( 4 )
$167.99
—
$211.99
For lots of cooling power in a little bit of space, install Flex-A-Lite low-profile S-Blade universal electric fans. They're only 2 5/8 in. deep, but the 15 in. wide x 13 1/2 in. high single fans move 1,250 cfm at 11 amps, while the 26 1/4 in. wide x 15 1/2 in. high dual fans move 2,500 cfm. The glass-reinforced nylon S-blades make all of that air move quietly and efficiently, and most fans include rigid brackets and through-core installation kits.
( 19 )
$193.99
—
$216.99
Fluidyne high performance electric fans are efficient performers for their size. They are available in several sizes and styles to fit your application.
( 3 )
$150.00
Proform's brushless motor electric cooling fans deliver more cfm than the competition for maximum cooling. These brushless fans are lightweight, low-profile, no amp spikes, and create cooling unlike anything out there. The best part is, they are totally universal and designed for 12-volt systems. No fancy engine specific controller required, just wire up the (+) and (-), and you're good to go. Soft start ramp up prevents amp spikes. The brushless electric fans are designed to fit the most popular cars and trucks. Order the electric fan model designed for your application needs. Product features and benefits: * Prevents overheating in stop-and-go traffic * Designed to fit the most popular cars and trucks * Frees the water pump pulley for more rpm * Thin design to fit cramped locations * Reinforced glass filled polypropylene blade and plastic housing for minimized weight * Nylon tie mounting kit included * Installs in minutes with simple hand tools Note: This is strictly a puller fan and is not reversible. Not compatible with variable speed fan controllers using PWM technology. Works with normal on/off thermostat controllers.
( 81 )
$189.95
—
$199.95
Perma-Cool standard electric fans are capable of moving almost twice the volume (cfm) of air as competitive models and still deliver a lower amp draw. Standard models feature high-strength, glass-filled polypropylene blades and shrouds. The straight blade design flows substantially more air than spiral blade designs and their low-profile construction is ideal for vehicles with limited space. They also offer reversible push/pull operation for mounting on either side of the radiator—making them ideal for use as auxiliary cooling fans. Keep your cool with the Perma-Cool standard electric fans designed for your application.
( 294 )
$100.25
—
$178.00
Gain maximum performance in minimal space with Zirgo BLU high-performance electric fans. These slim cooling fans feature high-torque fan motors with sealed ball bearings—and balanced blades for smoother, longer operation and ensured low-noise levels. Zirgo fans offer reversible blades (straight or S shape) for pusher or puller applications; and the fans are tested several times for quality assurance. BLU high performance fans are easy to install—their 4-point mounting bracket ensures easy placement, while the plug-in, color-coded harnesses direct you to a mistake-free install. The fans are available in a variety of sizes and CFM ranges. Order the model needed for your application.
( 55 )
$119.95
—
$234.49
With high torque and a low amperage draw motor, these fans will keep your engine cooler at lower driving speeds. Mr. Gasket's reversible fans ride on dual ball bearings instead of bushings, which means higher efficiency and less heat. They also free up more usable horsepower to the rear wheels, and increases fuel economy.
( 9 )
$176.95
—
$228.95
Derale Dyno-Cool curved blade electric fans offer a low profile and big power. These fans start with powerful, high-watt motors moving eight quiet, efficient, balanced, curved blades. Fully reversible for pusher or puller applications, these Dyno Cool fans come complete with installation hardware and wiring. Increase your horsepower, torque, and fuel economy with reversible Derale Performance Dyno Cool curved blade electric fans.
( 15 )
$126.78
Summit Racing™ offers aluminum fan shroud and thin-style fan combos in a variety of sizes and configurations. They not only look great, but also deliver affordable cooling for your vehicle. The low-profile shrouds feature sturdy aluminum construction, rubber mounting seals, and mounting hardware. They're available in different finishes, in single or dual fan layouts. The shrouds and fans easily mount to Summit Racing™ universal radiators.
( 12 )
$208.98
Maradyne Jetstreme electric fans feature a low-profile design to allow for turbo or supercharger installations. They use a sealed motor tested in accordance with DIN EN 60529 and are dust and waterproof to IP68. The fans utilize an S-blade design for quieter operation and have a rubber seal that eliminates vibration contact and increases airflow. Maradyne Jetstreme electric fans have all glass-filled nylon construction for maximum durability.
( 18 )
$192.79
—
$237.15
TCI's reversible electric fan kits offer several features that make them the right choice. These fans either push or pull air by simply reversing the blades. The fans are constructed out of lightweight nylon 6/6 high-temperature plastic with a low-profile design. Where space is at a premium, TCI's 10 in. and 12 in. units are both under 3 in. at the thickest part. Each fan comes complete with all necessary hardware and a quick mount connector kit.
( 1 )
$128.95
—
$187.95
Spal electric fans are built to meet the most rigorous automotive cooling requirements. They are durable, reliable, and the choice of many NASCAR teams. Some models are also perfect for your motorcycle, ATV, and/or oil cooler applications. Spal manufactures these fans from sturdy plastic, and most feature a fully sealed waterproof/dust-proof motor. Each fan is individually balanced for long life. Spal fans can be mounted to any radiator with universal brackets and shrouds. Order the size, cfm range, amp draw, blade quantity, and pusher/puller option needed for your vehicle.
( 626 )
$101.22
—
$111.78
A Griffin radiator is an excellent idea; backing it up with one of their quality electric fans is even a better idea to keep your ride cool. Griffin is a firm believer in pull-type electric fans, because they don't sap a lot of horsepower and don't interfere with normal airflow through the radiator at highway speeds. Their fans are available in differing sizes and types and include trick features such as high-efficiency curved blades.
( 10 )
$142.00
—
$151.00
American Autowire Factory-Fit wiring harnesses are OE replacements and are manufactured according to the original General Motors specifications. Each part number is fully assembled, taped, and ready to install upon arrival. They are best suited for a restoration project with minimal to no modification from the factory specification. American Autowire Factory-Fit harnesses are offered for individual dash, engine, forward lamp, console, rear body, and more, but the best thing is you can purchase a wiring harness as you need it or can afford it, making them great for those on a budget. Plus, since they are OEM-styled the fit is perfect and the installation time is less.
( 28 )
$203.30
Modal Header