Availability
Showing In Stock Items. Show All 117 Items.
Bilstein B8 5100 Series steering stabilizers feature a monotube design for cooler, more efficient operation and longer life. They have the largest available piston diameter, providing superior handling and performance. Their patented digressive valving instantly reacts to changing surface conditions for maximum comfort and control--on and off the road.
( 266 )
$281.00
On Sale
Superlift dual steering stabilizer kits are essentially shock absorbers for your steering system. They allow unrestricted gradual movement, but resist sudden shock, improving driver comfort and steering ability. These damper kits include two cylinders and mounting hardware for vehicles that are not factory equipped with a stabilizer. They're great for rigs that see extreme duty or have extra-large tires. Numerous models are available, with specific fitment requirements. Click the product application tabs to find the steering damper best suited for your truck or SUV.
( 14 )
$429.99
$365.49
TeraFlex ball joints can help keep your Jeep's off-road integrity intact! Engineered to perform under heavy stresses with excellent wear, these replacement ball joint kits easily handle the increased load caused by oversized tires and offset wheels. The upper ball joints incorporate hard sintered wear bushings to endure extreme side load demands without failure; while the lower ball joints feature a threaded top cap for adjustable preload—and allow grease servicing without axle shaft removal. TeraFlex ball joints feature carbon steel housing with magnesium phosphate coated assembly, plus chromoly ball/stud with magnesium phosphate anti-corrosion coating. For easy maintenance, the TeraFlex ball joints include grease zerks.
( 7 )
$307.99
These Borgeson Universal telescoping steering shafts can be used in a variety of applications and will make the installation and removal of steering system components simple and easy. By pulling or pushing on the shafts, you can shorten or increase their overall length. They meet NHTSA guidelines for collapsibility in passenger cars and add a measure of safety. The steering shafts can also be trimmed to fit shorter applications.
( 397 )
$291.13
Fox Racing Shox 2.0 Performance Series IFP steering stabilizers help take the load off your steering components, and keep your tires tracking straight and true. Oversized off-road tires have a tendency to seek out traction in any direction, while their large knobs and open tread pattern can cause your front end to wander on or off the road. Fox 2.0 Performance Series IFP (internal floating piston) stabilizers use advanced damping technology to tame steering feedback from even the most aggressive tires. Features include: * 2.0 in. metal-impacted 6061 T-6 aluminum body resists rust * Clear anodized finish * IFP monotube reservoir design separates stabilizer oil from high-pressure nitrogen * Components are black anodized, CNC-machined 6061 T-6 billet aluminum * Shaft is 5/8 in. hard chrome plated heat-treated alloy steel * Race-developed high-flow piston design * Valving is application specific to maximize performance * Redundant sealing pack system: main seal, wiper seal, and scraper seal * JM92 advanced suspension fluid for improved performance at variable temperatures * Quiet nitrile rubber bushings allow for increased suspension articulation
( 26 )
$251.95
Crown Automotive steering kits remain an affordable way to eliminate slack in your old OE linkage. Each kit includes tie rod ends, adjusters, and mounting hardware, as well as a steering stabilizer. Crown steering assemblies are engineered to exactly match the factory design, so they're guaranteed to bolt in place of your original linkage without any hang-ups. Order the kit tailored for fitment on your vehicle.
( 11 )
$318.99
These Moog replacement drag links are designed to fit your stock vehicle without any modifications. Moog replacement drag links are made of steel, feature a natural finish, and will install easily. For quality replacement parts, you need Moog replacement drag links.
( 20 )
$290.99
Lares new steering gears are manufactured from the same high-quality materials as your original components to provide long-lasting performance. These new steering gear units (not remanufactured) are engineered to OE specifications to ensure proper fit, form, and function, and each new unit is then inspected, adjusted accordingly and filled with a high-quality grease, so they arrive to you ready for installation. Simply verify fitment, and order your new Lares steering gear that's designed to fit your application.
( 115 )
$381.99
—
$482.99
Reid Racing offers heavy-duty steering knuckles for a variety of your off-road applications. These heavy-duty steering knuckles are cast from high-strength ductile iron and beefed up with extra material and ribbing. Fully machined and ready to install, Reid Racing heavy-duty steering knuckles feature cast-in steering stops that eliminate bent stop bolts and they are topped off with a bright powdercoated finish.
( 15 )
$399.00
PSC Ram Cylinder Assist replacement cylinder and hose kits include a steering assist cylinder, high-pressure hoses, and steering fluid. You can maintain the performance of your Ram to efficiently handle increased torque loads and deliver improved handling with these kits. Service your system with parts you know will fit and function just like the originals; choose only PSC replacement cylinder and hose kits.
Not Yet Reviewed
$499.51
BD Diesel steering stabilizer bars are also known as "The Wobble Stopper!" These steel support brackets will eliminate steering wander and wobble caused by excessive shaft play in the steering box of your rig. BD Diesel has designed these kits for easy, bolt-in installation—in about an hour you'll gain a more positive steering feel. Order the model tailored for fitment on your vehicle application. BD Diesel steering stabilizer bars feature: * Steel construction finished with black or silver vein powdercoat to resist corrosion * Virtually eliminates frame flex at the steering box mounting point * Greaseable, high-quality bearing for reliable operation * High-strength mounting hardware * For gas and diesel vehicles
( 30 )
$269.95
On Sale
Holley has responded to the expanding late model marketplace by developing the most complete line-up of performance upgrades and engine swap products, including Holley power steering pumps. They are available in two versions: cast iron Saginaw Type II pumps with reservoirs for use on low accessory drives; or Corvette-style lightweight aluminum pumps (also known as Saginaw TC type pumps) for use with Holley driver's side brackets. The aluminum pumps also work with Holley's special reservoir kit.
( 1 )
$549.95
$437.95
—
$493.95
Moog pre-assembled steering linkages are direct-fit steering linkage replacement packages. They feature premium-quality materials that provide strength and durability for long-lasting performance and alignment, reducing tire wear and improving steering. Their premium components come pre-assembled for a quick and easy installation. Simply install the complete linkage and set the alignment; a one-shot solution that eliminates the need to identify, source, and assemble all of the individual parts required.
( 41 )
$433.99
Steer Smarts Yeti XD tie rod assemblies are a direct bolt-on for any Jeep JK Wrangler. They install in just minutes with no need for modifications. The tie rods are engineered for proper clearance to other components to eliminate interferences. Additional component details: TIE ROD ENDS: * Powdercoat over E-coat for a long-lasting appearance under harsh conditions * External threads are E-coated for durability and long-term serviceability * Forged from medium carbon high-hardenability steel and heat-treated for even greater buckling, impact, and fatigue strength * Large 1 1/4 in. rolled threads at tie rod adjuster and drag link ends provide significantly increased strength over the original equipment threads * Unique "Reverse Pin" technology prevents linkage from flopping or rocking. This technology is built into the socket, unlike the weak external supports on some competitor linkages BALL JOINTS: * 30mm 2 1/2 ton ball joints designed specifically for the JK * Cold-headed medium carbon alloy steel ball studs provide incredible impact toughness for extreme duty usage * Induction heat-treated ball studs provide ultimate fatigue strength and superior off-road durability * Steel-on-steel bearings provide exceptional ball joint wear resistance and robustness * High-quality seals ensure long ball joint life. They've been rigorously tested to minimize leakage between grease service intervals, which greatly improves ball joint reliability over our competition * Fully greaseable ADJUSTER SLEEVE: * Tie rod adjuster is manufactured from large diameter 1/4 in. thick wall high-strength 4130 chromoly steel tubing for maximum buckling strength * Adjuster clamps ensure proper clamp force using conventional tools without the possible risk of loosening like large jam nuts * Designed with right-hand and left-hand threads for quick and easy adjustment when installed on the vehicle * Internal threads and tubes are also E-coated for long-term serviceability
Not Yet Reviewed
$475.00
Get your suspension back into shape with Eibach alignment kits. After installing a spring set, your vehicle's alignment should always be checked. If you've lowered yours, the wheel camber may become increasingly "negative"—meaning the top of the tire is angled inward. While some negative camber improves traction and road adhesion, too much can result in peculiar handling and accelerated tire wear. Enjoy precise handling and enhanced high speed stability with the Eibach alignment kit designed for your application. Product features: * Assist in adjusting your vehicle's camber back to factory specifications * Allows experienced chassis tuner to "dial-in" a performance alignment that uses negative camber to maximize a chassis' potential by utilizing the increased adjustment range * Compatible with all Eibach Sportline-lowered suspensions
( 40 )
$347.00
—
$474.00
Mopar Replacement dampers deliver reliable and safe performance. These genuine Mopar parts also offer the correct fit for an easier install. When you need authentic OE-quality parts to repair and restore performance in your Chrysler, Dodge, or Plymouth, look to the OE-maker for the replacement shocks that you need—Mopar!
( 2 )
$253.99
PSC power steering pumps greatly benefitting rock crawlers running low rpm's. These pumps are used in conjunction with cylinders and hydraulic-assist setups. With modifications, these pumps will work with full hydraulic steering. Whether interested in one piece or the entire kit, PSC power steering pumps will turn your tires, making for fun 4-wheeling. Order the universal or vehicle-specific model recommended for your application.
( 56 )
$350.00
—
$425.00
LS Classic Series GM Type 2 power steering pumps help you achieve that vintage look on your LS engine-swapped classic. Intended as replacements for pumps supplied in LS Classic accessory drive kits, they can also run with a stock plastic reservoir (not included) that mounts directly to the inlet in other applications. If you're running a Mustang II rack and pinion, use these with LS Classic Series flow control valves. They deliver constant flow under operating pressures. LS Classic Series GM Type 2 power steering pump features include: * 0.662 in. shaft diameter with no keyway * Two 5/16 in. through-bolt mounting holes * 3 gpm flow rate at 1,250 to 1,350 psi * For use with GM power steering gearboxes and rack and pinion
Not Yet Reviewed
$282.95
Pedders SportsRyder eXtreme XA pillow ball camber plates provide you with full camber adjustability for fitment to your eXtreme XA coilover kits. Featuring heavy-duty construction, pairing the plates along with Pedders roller bearing top spring seat (not in every kit), you will maintain smooth steering response and return-ability. This is achieved by dividing the articulating and rotational loads between the upper mount spherical bearing for articulation and the roller bearing top spring seat for rotation, delivering premium steering feel and response with full camber adjustability. Choose the SportsRyder eXtreme camber plates designed for your vehicle.
Not Yet Reviewed
$323.96
Steer Smarts YETI XD sector shaft braces will make an immediately noticeable improvement to the overall drivability of your vehicle. These braces with frame-side track bar reinforcement bracket, were engineered to bolt onto the stock track bar mount on the frame. The purpose of this is two-fold. First, the sector shaft support is meant to help minimize the aluminum and steel steering gears from flexing, deflecting, moving when cycling your steering system side to side. The second part is to reinforce the frame-side track bar mounting location to help minimize the deflection of these frame-side brackets and ensure that the mount doesn't break under extreme stress. Select the one designed for your Jeep. Features: * Easy bolt-on installation with minimal modification needed * 1/4 in. thick wall steel laser-cut bracket * 1/2 in. steel sector support with sealed roller bearing * All upgraded fasteners included * E-coated for corrosion resistance that won't chip when torqued
Not Yet Reviewed
$320.00
Dorman steering drag links are precision-engineered and rigorously tested to provide a reliable fit and performance. They are direct replacements and offered to fit many applications. Repair and maintain your vehicle's operation with the quality and confidence of Dorman steering drag links.
( 2 )
$267.99
Yeti XD Series is Steer Smarts' most extreme steering linkage for your Jeep JK Wrangler. These "No Drill" top mount drag links are complete bolt-ons for high steer applications—and feature the patent pending reverse taper mount design. They're the quickest and easiest drag link flip on the market; installation takes just minutes, and there's no need to modify or alter your stock knuckle. The drag links bolt to the factory tapered knuckle hole and the factory pitman arm hole. Additional details: * Easy bolt-on installation * Engineered for proper clearance to other chassis components to eliminate interferences * A minimum of 17 in. wheels is recommended. 16 in. wheels with a maximum 4.5 backspacing might fit but not guaranteed BALL JOINTS: * 30mm 2 1/2 ton ball joints designed specifically for the JK * Cold-headed medium carbon alloy steel ball studs provide incredible impact toughness for extreme duty usage * Induction heat-treated ball studs provide ultimate fatigue strength and superior off-road durability * Steel-on-steel bearings provide exceptional ball joint wear resistance and robustness * High-quality seals ensure long ball joint life. They've been rigorously tested to minimize leakage between grease service intervals, which greatly improves Steer Smarts' ball joint reliability over the competition * Fully greaseable DRAG LINK ENDS: * Powdercoat over E-coat for a long-lasting appearance under harsh conditions * External threads are E-coated for durability and long-term serviceability * Forged from medium carbon high harden-ability steel and heat-treated for greater buckling, impact, and fatigue strength * Forged from medium carbon high-hardenability steel and heat-treated for even greater buckling, impact, and fatigue strength * Large 1 1/4 in. rolled threads at tie rod adjuster and drag link ends provide significantly increased strength over the original equipment threads * Unique "Reverse Pin" technology prevents the linkage from flopping or rocking. This technology is built into the socket, unlike the weak external supports on some competitor linkages ADJUSTER TUBE: * Drag link adjuster is manufactured from large diameter 1/4 in. thick wall high-strength 4130 chromoly steel tubing for maximum buckling strength * Adjuster clamps assure proper clamp force using conventional tools without the possible risk of loosening like large jam nuts * Designed with right hand and left hand threads for quick and easy adjustment when installed on the vehicle * Internal threads and tube are also E-coated for long-term serviceability
Not Yet Reviewed
$449.00
—
$475.00
These Dorman steering knuckles are built and designed to OEM tolerances to fit your stock application without making any modifications. They are manufactured from premium materials and have all stock holes and threaded bolt holes machined in. The knuckles are available for passenger cars, trucks, and SUVs, so we'll have your application covered.
( 8 )
$277.99
—
$458.95
Lares offers brand new power rack and pinions for a variety of applications. Engineered to OE specifications, each unit is inspected, adjusted, and hydraulically tested. These assemblies convert the rotational motion of your steering wheel into the linear motion needed to turn the wheels. Rack and pinions are backed with a Limited Lifetime Warranty (or one-year for commercial use). Order the model recommended for your vehicle.
( 9 )
$253.99
—
$451.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
