Availability
Showing In Stock Items. Show All 20 Items.
PSC power steering pump kits are engineered specifically to power cylinder assist systems, providing the required pressure and flow of power steering fluid. Includes: * Remote reservoir * 4 qts. of SWEPCO 715 Power Steering Fluid * Fluid cooler * SR-VT fluid anti-splash valve * Pulley * Bracketry * Hardware * Fittings, and pre-assembled hoses
Not Yet Reviewed
$1,249.45
PSC Big Bore XD steering gears are direct replacements for your inadequate steering gear. They feature larger piston diameters, which increase the torque output of the steering gear—allowing your rig to overcome steering issues due to larger tires and/or locking differentials that you've installed. PSC Big Bore XD units are assembled using all new components and featuring their exclusive new gear housing--not reworked core housings, but 100 percent new cast and machined housings. PSC also offers cylinder-assist versions for vehicles that have 38 in. and bigger tires and larger drivelines. Order the steering gears designed for fitment with your make and model.
( 25 )
$1,099.99
—
$1,195.00
Not getting a response? PSC replacement steering boxes will respond appropriately to restore handling to what it was meant to be. These gearboxes offer the right fit and performance so that your steering input effort results in the corresponding wheel output. Retain your stock performance with PSC replacement steering boxes. Order the model designed for fitment with your vehicle.
( 1 )
$1,350.00
On Sale
Holley retro-fit hydraulic power steering kits for GM LT4/LT5 engines are here to rescue anyone looking to put an LT4/LT5 crate motor or junkyard motor into their vehicle initially equipped with hydraulic power steering. The design incorporates a splined dual-bearing system that eliminates belt stresses on the P/S pump's internal bearings, assuring long life. Versions of the power steering drives are available for LT4/5 dry-sump and LT4 wet-sump applications. Please order accordingly. Features of Holley retro-fit hydraulic power steering kits include: * Works with your OE accessories and brackets * Supercharger drive maintains the original/optimized belt path and tensioner * Throttle body angle-correcting adapter that better positions the TB for swap applications * Original equipment Type II power steering pump included for OE looks and reliability * Power steering hard line adapters included * Maintains OE pulley ratios for optimal accessory performance * Allows for installation and use of larger supercharger crank pulley (15 percent overdrive or 9.44 in. diameter)
Not Yet Reviewed
$1,399.95
$1,258.95
—
$1,349.95
Clearance
Lares new (not remanufactured) power steering pumps are engineered to OE specifications to ensure proper fit, form, and function. They're manufactured from the same high-quality materials as your original components to provide long-lasting performance. Over a hundred models are available, with or without an included reservoir, for vehicle and engine applications from 1960 and up. Order the replacement pump recommended for your ride.
( 139 )
$1,040.99
Astemo offers hydraulic rack and pinions for a wide range of vehicles, particularly import models. The units are made from a combination of high-strength steel alloy for durability and aluminum for weight reduction and better heat dissipation and come with required bushings, tie rod ends and mounting brackets. Precision-machined installation points allow for proper installation of auxiliary components that were on the vehicle originally, such as speed sensitive power steering modules. Designed to meet the exact needs of each specific vehicle, Astemo rack and pinion assemblies are the premium choice. Order model recommended for fitment on your car or truck.
( 1 )
$1,026.99
Clearance
Motorcraft steering gear boxes will restore effortless turning. These remanufactured units include new sector shafts, and gear housings that do not meet stringent standards are replaced with new. The process includes precise ball sizing—not a one-size-fits-all approach—to ensure the correct amount of steering effort, reducing play in the steering. All replacement parts are 100 percent original equipment. Choose the right replacements for your Ford, Lincoln, and Mercury steering systems; make your choice a Motorcraft steering gear box.
( 14 )
$1,618.99
$1,045.50
On Sale
Manufacturer Rebate
Artec Industries Super Duty aluminum crossover steering kits are premium front axle kits for your Jeep offering the ultimate steering solution for your Super Duty axle swap. Kits start with Artec's 1.75 in. O.D. aerospace-grade 7075 aluminum rods mated with premium tie rod ends that are designed after those in the Ford F-450s--beefy and longest lasting. The tie rod and drag link ends are offset to account for the short arms on the Super Duty knuckles that provide a great steering feel and no contact with the differential. These are coupled with stainless steel spacers and adapters to allow a perfect fit to your new axle. Each link is threaded with both right-hand and left-hand threads at opposite ends making it easier to adjust the length alignment. Artec included wrench flats on each end of the aluminum link so you can easily tighten your jam nuts without marring the aluminum. Artec Industries Super Duty swap steering kits are available for Jeep JL/JT or the JK with the only difference being the drag link at the end of the pitman arm. Contents: * RH and LH tie rod ends 1.25 in. thread * RH drag link end 1.25 in. thread (pitman arm side, JL or JK taper) * LH drag link End 1.25 in. thread (knuckle side) * RH and LH 1.25 in., 12 TPI jam nuts * 1.75 in. O.D. 7075 T-6 aluminum tie rod bar and drag link bar * Stainless steel spacers/washers to adapt to the Super Duty knuckles and high-steer arm
Not Yet Reviewed
$1,396.99
$1,257.29
Rock Crawlers, Ultra 4 Racers, and Rock Racers all need extra help turning locked axles with large tires over rocks and other wild terrain. PSC full hydraulic steering systems turn up to 44 in. tall tires as smooth as glass. They feature new hydraulic cylinders, orbital control valves, and full hydraulic hose kits. Most of the included steering stub collars and brackets require welding. These quick ratio systems change valving and should be used sparingly on paved roads. PSC full hydraulic steering systems are designed to ease arm-strong issues on full time off-road machines.
( 7 )
$1,249.95
For those who want a bolt-in, no modification required, heavy-duty steering system for many Jeep Wranglers and Gladiators (2007 and up), Steer Smarts has the solution for you. This one-click kit includes a Yeti XD tie rod, bottom mount drag link, and 1 5/8 in. aluminum damper bracket. You can round out the front-end trifecta by adding Steer Smarts' Yeti XD front adjustable track bar for the ultimate front-end setup. * Note: Not compatible with stock JK or Super Duty Dana 60 axles. Only with upgraded aftermarket DANA Ultimate Dana 60 axle Product features: YETI XD TIE ROD + DRAG LINK ASSEMBLIES: * Easy bolt-on installation * Engineered for proper clearance to other chassis components to eliminate interferences BALL JOINTS: * 30mm 1 1/2 ton ball joints are designed specifically for the JK with a UD60 (68.5 in. wide) * Cold-headed medium carbon alloy steel ball studs provide incredible impact toughness for extreme-duty usage * Induction heat-treated ball studs provide ultimate fatigue strength and superior off-road durability * Steel on steel bearings provide exceptional ball joint wear resistance and robustness * High-quality seals ensure ball joints' life is long-lived. These superior seals have been rigorously tested to minimize leakage between grease service intervals which significantly improves ball joint reliability over the competition * Fully greaseable TIE ROD + DRAG LINK ENDS: * Powdercoat over E-coat for a long-lasting appearance under harsh conditions * External threads are E-coated for durability and long-term serviceability * Forged from medium carbon high hardenability steel and heat-treated for even greater buckling, impact, and fatigue strength * Large 1 1/4 in. rolled threads at tie rod adjuster and drag link ends provide significantly increased strength over the original equipment threads * Unique "Reverse Pin" technology on the passenger-side ends prevents linkage from unwanted flopping/rocking. This technology is built into the socket, unlike the weak external supports on some competitor linkages ADJUSTER TUBES: * Tie rod and drag link adjusters are manufactured from large diameter 1/4 in. thick wall high-strength 4130 chromoly steel tubing for maximum buckling strength * Adjuster clamps assure proper clamp force using conventional tools without the possible risk of loosening like large jam nuts * Designed with right-hand and left-hand threads for quick and easy adjustment when installed on the vehicle * Internal threads and tube are also E-coated for long-term serviceability * Yeti XD tie rod and drag link fit all left-hand drive JK Wrangler models 2007-2018 equipped with a Dana UD60 (68.5 in. wide)
Not Yet Reviewed
$1,035.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
