Availability
Lares new (not remanufactured) power steering pumps are engineered to OE specifications to ensure proper fit, form, and function. They're manufactured from the same high-quality materials as your original components to provide long-lasting performance. Over a hundred models are available, with or without an included reservoir, for vehicle and engine applications from 1960 and up. Order the replacement pump recommended for your ride.
( 139 )
$86.50
—
$1,040.99
SPC Performance ball joints are quality replacements for worn ball joints on your control arms. The ball joints are offered in a variety of configurations, and will work perfectly with SPC Performance control arm components. Order the SPC Performance ball joint suited to fit your application needs.
( 24 )
$109.99
—
$176.99
McGaughy's offers replacement tie rod ends for hundreds of Chevy and GMC applications from 1999 and up. Worn originals can cause shaky front wheels, misaligned or excessively worn front tires, and imprecise steering. These economical replacements will restore the handling performance you expect. Order the model recommended for your vehicle.
( 19 )
$69.99
PSC Big Bore XD steering gears are direct replacements for your inadequate steering gear. They feature larger piston diameters, which increase the torque output of the steering gear—allowing your rig to overcome steering issues due to larger tires and/or locking differentials that you've installed. PSC Big Bore XD units are assembled using all new components and featuring their exclusive new gear housing--not reworked core housings, but 100 percent new cast and machined housings. PSC also offers cylinder-assist versions for vehicles that have 38 in. and bigger tires and larger drivelines. Order the steering gears designed for fitment with your make and model.
( 25 )
$995.00
—
$2,250.00
Improve the handling of your Ford, Dodge Ram, Jeep, Chevrolet, or GMC truck by installing a BDS single steering stabilizer mounting kit. Adding larger tires create additional forces on your trucks suspension and steering stabilizer shocks reduce bump steer and steering wheel feedback. BDS mounting brackets are made from high strength steel and are an easy bolt-on installation. By installing a steering stabilizer kit with your BDS lift kit you will reduce wear and maximize the life of your factory steering components. Order the brackets for your vehicle application. Features and benefits: * High-strength steel mounting brackets designed for easy bolt-on installation * Black powdercoated finish * Improves overall vehicle handling characteristics * Better control of any front end shimmy caused by oversized tire/wheel combinations * Allows installation of a single stabilizer cylinder * All hardware included (cylinders sold separately)
( 3 )
$43.95
—
$142.95
BDS Suspension offers steering stabilizer kits with NX2 shocks for a variety of applications, including many Chevy, GMC, Dodge, Jeep, Ram, and Ford vehicles from 1973 and up. The stabilizers are available in single (for stock/lifted) or dual inline (for lifted) designs. These components will enhance the handling of your truck or SUV. Installing larger tires can exert additional force on your suspension, but steering stabilizer shocks can effectively reduce bump steer and steering wheel feedback. BDS mounting brackets are constructed of high-strength steel and can be easily bolted on. The BDS NX2 stabilizer uses a pressurized nitrogen-charged twin-tube design with 10-stage velocity-sensitive valving for lightning-fast dampening adaptive to whatever terrain you traverse, on- or off-road. The 2-inch bodied shocks use a large 1 3/8 in. fluon-banded piston, self-lubricating seals and a 14mm hardened chrome shaft to help resist rock chips and corrosion.
( 8 )
$63.95
—
$246.85
Bilstein B8 5100 Series steering stabilizers feature a monotube design for cooler, more efficient operation and longer life. They have the largest available piston diameter, providing superior handling and performance. Their patented digressive valving instantly reacts to changing surface conditions for maximum comfort and control--on and off the road.
( 266 )
$115.00
—
$281.00
These SPC Performance camber/caster sleeves are designed to solve troublesome front-end alignment problems. They are manufactured from quality materials and are available in a variety of configurations for your specific application. SPC Performance camber/caster sleeves install easily with no modifications and adjust caster, camber, and even both in some applications. Save your tires from wearing out too quickly. Get one of these SPC Performance camber/caster sleeves and you'll be lined up in no time.
( 20 )
$11.99
—
$214.99
PSC power steering pumps greatly benefitting rock crawlers running low rpm's. These pumps are used in conjunction with cylinders and hydraulic-assist setups. With modifications, these pumps will work with full hydraulic steering. Whether interested in one piece or the entire kit, PSC power steering pumps will turn your tires, making for fun 4-wheeling. Order the universal or vehicle-specific model recommended for your application.
( 56 )
$275.00
—
$1,195.00
Borgeson is a leading manufacturer of all-new, direct replacement steering boxes, as well as quality re-manufactured units. Whether water has crept in or the oil has broken down, eroding parts inside an aging steering box can create a real mess. Regain control with an exact-fit steering box from Borgeson.
( 31 )
$609.53
On Sale
Spicer Drivetrain Products offers ball joints for a broad range of applications, from the 1970s and up. These OE-style replacements are made from quality materials, and most include mounting nut and cotter pin for installation. Swap out your worn or damaged original ball joints with a new kit from Spicer.
( 91 )
$256.99
$91.99
—
$231.29
American Iron Off-Road ball joint delete Gen 2 for Jeeps (1990-2017) kits will replace both the upper and lower ball joints on your ride. This second-generation system features a lower cup machined with a recessed flat for increased clearance with axle shafts and RCV setups. The double-ended upper stud accounts for variances between the knuckle and inner C castings, and you can dial-in steering firmness by adjusting torque values on the top Nylock upper and lower assemblies. Enjoy better clearance, an easier installation, and decreased parasitic drag with American Iron Off-Road ball joint delete Gen 2 for Jeeps (1990-2017) kits! More product features and specifications include: * Using two double-ended studs, the hardware is installed in the knuckle with the lower Nylocks fully seated into the tapers and slid onto the inner C casting from below * Adjustable float to accommodate bent C castings and other abnormalities
( 1 )
$639.99
On Sale
Superlift dual steering stabilizer kits are essentially shock absorbers for your steering system. They allow unrestricted gradual movement, but resist sudden shock, improving driver comfort and steering ability. These damper kits include two cylinders and mounting hardware for vehicles that are not factory equipped with a stabilizer. They're great for rigs that see extreme duty or have extra-large tires. Numerous models are available, with specific fitment requirements. Click the product application tabs to find the steering damper best suited for your truck or SUV.
( 14 )
$649.99
$237.99
—
$552.49
Moog pre-assembled steering linkages are direct-fit steering linkage replacement packages. They feature premium-quality materials that provide strength and durability for long-lasting performance and alignment, reducing tire wear and improving steering. Their premium components come pre-assembled for a quick and easy installation. Simply install the complete linkage and set the alignment; a one-shot solution that eliminates the need to identify, source, and assemble all of the individual parts required.
( 41 )
$433.99
—
$543.99
Clearance
Moog has a problem-solving heritage. Their focus has always been on improving OE products, designing easy-to-install parts, and developing leading-edge technology. Moog ball joints are no exception, helping to restore your chassis to like-new condition. Performance and durability are traits required to reach the winner's circle, and Moog offers these top-quality steering linkage components for hundreds of applications--front, rear, upper, and lower. Choose the ball joints that match your drivetrain and make/model.
( 1072 )
$99.99
$17.99
—
$230.99
TeraFlex ball joints can help keep your Jeep's off-road integrity intact! Engineered to perform under heavy stresses with excellent wear, these replacement ball joint kits easily handle the increased load caused by oversized tires and offset wheels. The upper ball joints incorporate hard sintered wear bushings to endure extreme side load demands without failure; while the lower ball joints feature a threaded top cap for adjustable preload—and allow grease servicing without axle shaft removal. TeraFlex ball joints feature carbon steel housing with magnesium phosphate coated assembly, plus chromoly ball/stud with magnesium phosphate anti-corrosion coating. For easy maintenance, the TeraFlex ball joints include grease zerks.
( 7 )
$98.99
—
$307.99
Moog replacement tie rod ends are designed as OE replacements for your stock units. Moog replacement tie rod ends feature durable, all-metal construction that is not prone to failure like OE plastic tie rod ends. Since Moog replacement tie rod ends are greasable (except where noted), friction is reduced and contaminants are flushed out. Plus, they have an easy-access wrench flat that allows for the use of a socket for easy installation.
( 802 )
$16.99
—
$273.99
Fox Racing Shox 2.0 Performance Series IFP steering stabilizers help take the load off your steering components, and keep your tires tracking straight and true. Oversized off-road tires have a tendency to seek out traction in any direction, while their large knobs and open tread pattern can cause your front end to wander on or off the road. Fox 2.0 Performance Series IFP (internal floating piston) stabilizers use advanced damping technology to tame steering feedback from even the most aggressive tires. Features include: * 2.0 in. metal-impacted 6061 T-6 aluminum body resists rust * Clear anodized finish * IFP monotube reservoir design separates stabilizer oil from high-pressure nitrogen * Components are black anodized, CNC-machined 6061 T-6 billet aluminum * Shaft is 5/8 in. hard chrome plated heat-treated alloy steel * Race-developed high-flow piston design * Valving is application specific to maximize performance * Redundant sealing pack system: main seal, wiper seal, and scraper seal * JM92 advanced suspension fluid for improved performance at variable temperatures * Quiet nitrile rubber bushings allow for increased suspension articulation
( 26 )
$229.95
—
$251.95
Moog offers these quality replacement pitman arms for many applications. They're built to factory specs, so you can be assured that you're getting a quality product that will help to keep your vehicle's steering as smooth as it was when it rolled off of the assembly line.
( 138 )
$38.99
—
$118.99
These Borgeson Universal telescoping steering shafts can be used in a variety of applications and will make the installation and removal of steering system components simple and easy. By pulling or pushing on the shafts, you can shorten or increase their overall length. They meet NHTSA guidelines for collapsibility in passenger cars and add a measure of safety. The steering shafts can also be trimmed to fit shorter applications.
( 397 )
$196.47
—
$317.52
PSC's JK Big Bore XD steering gear box replaces the 70mm stock piston with a larger 80mm piston, giving it more turning torque to turn up to 37 in. tall tires without the need of cylinder assist. More material was added to the case in all mounting for a sturdier base. The sector shaft diameter was increased from 35mm to 42mm for a 35 percent increase in strength. PSC JK Big Bore XD kits come with a factory drop pitman arm, nut, and washer to match the newer larger sector shaft. Anyone with a Jeep JK running larger than factory tires will want this bolt-on upgrade on their must have list!
Not Yet Reviewed
$1,449.54
Dorman power steering racks are newly manufactured power steering rack and pinion assemblies that are an upgrade to the factory unit. Each rack features improved seals, free programming and pre-loaded software with a calibration tool. With this software and tool you don't have to take your vehicle to the dealer just to get it programmed. All this convenience—and you get Dorman top-of-the-line quality by each power steering rack unit going through rigorous testing to meet all federal motor safety standards.
( 1 )
$1,680.99
—
$2,065.99
American Iron Off-Road ball joint delete Dodge AAM kits change the dynamics of the factory configuration, where the uppers and lowers don't rotate on the same axis. In the factory configuration, the lower joint misaligns as it rotates and the upper joint telescopes because it's not really a ball joint, but a greased shank inside a steel sleeve. This system will help stop the endless ball joint replacement cycle and improve the quirky factory steering characteristics. Get rid of the old press-in ball joint headache with the American Iron Off-Road ball joint delete system best suited for your build. More product features and specifications include: * Custom machined press-fit upper and lower cups * Custom 4140 heat-treated hardware with Grade 8 Nylock nuts * PTFE-lined 7/8 in. bearings for smooth operation * 3D-printed plastic dust cap and Viton® seal head to keep debris from tops of each assembly * Open bottom to allow any moisture to evacuate from joint * Customized oversized cups (0.008 in. over) available for axles with enlarged inner C-mount holes from numerous replacements
( 2 )
$714.99
TeraFlex HD tie rod and drag link kits are built for punishment. Extreme conditions that normally would cause your factory steering components to bend and fail are where these kits will survive. They are designed and engineered to be strong and durable to take you through the terrain, over the rocks, and back home. Outfit your rig with TeraFlex HD tie rod and drag link kits. TeraFlex kits feature: * HD tie rod is 1.6 in. O.D. 4140 heat-treated chromoly * Forged tie rod end housing designed * Allows proper clearance for use with factory 17 in. wheels * Tie rod end joint incorporates same features found in TeraFlex ball joints, including 4140 chromoly ball/stud and 1045 carbon steel housing * Adjustable preload tension to ensure proper long-term durability * Includes the clamp or the TeraFlex steering stabilizer relocation kit * The joint is pressed into the rod end housing and secured with a snap ring. When oriented in the tie rod configuration, the joint offers a total of 14 degrees of movement to minimize tie rod roll, but will still allow maximum turning. * 1.25 in. O.D. fully forged drag link eliminates excess movement during hard steering maneuvers * Oversized DOM factory-style adjusting collar and pinch clamp for simple adjustments
( 4 )
$972.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
