Availability
Showing In Stock Items. Show All 40 Items.
Larger tires and a weak drag link collar can severely affect your vehicle's performance. Rock Jock offers a great setup—Currectlync steering systems! Each of these heavy-duty tie rod and drag link systems is built to be stronger than stock. Both rods are constructed of forged alloy steel, and include a heavy-duty steering stabilizer bracket and necessary hardware to facilitate an easy bolt-on installation. Enhance your strength with Rock Jock Currectlync steering systems.
( 2 )
$712.00
Borgeson Dodge truck upgrade steering boxes feature all-new components designed and built specifically for your Dodge truck. They fit all OEM and dropped pitman arms and include an adapter to work with all Borgeson replacement steering shafts. A Borgeson steering shaft will be required for the installation of these steering boxes, or a flat must be ground on the steering box adapter to fit your stock shaft.
( 10 )
$656.78
American Iron Off-Road ball joint delete Gen 2 for Jeeps (1990-2017) kits will replace both the upper and lower ball joints on your ride. This second-generation system features a lower cup machined with a recessed flat for increased clearance with axle shafts and RCV setups. The double-ended upper stud accounts for variances between the knuckle and inner C castings, and you can dial-in steering firmness by adjusting torque values on the top Nylock upper and lower assemblies. Enjoy better clearance, an easier installation, and decreased parasitic drag with American Iron Off-Road ball joint delete Gen 2 for Jeeps (1990-2017) kits! More product features and specifications include: * Using two double-ended studs, the hardware is installed in the knuckle with the lower Nylocks fully seated into the tapers and slid onto the inner C casting from below * Adjustable float to accommodate bent C castings and other abnormalities
( 1 )
$639.99
Holley has responded to the expanding late model marketplace by developing the most complete line-up of performance upgrades and engine swap products, including Holley power steering pumps. They are available in two versions: cast iron Saginaw Type II pumps with reservoirs for use on low accessory drives; or Corvette-style lightweight aluminum pumps (also known as Saginaw TC type pumps) for use with Holley driver's side brackets. The aluminum pumps also work with Holley's special reservoir kit.
( 1 )
$549.95
American Iron Off-Road ball joint delete Dodge AAM kits change the dynamics of the factory configuration, where the uppers and lowers don't rotate on the same axis. In the factory configuration, the lower joint misaligns as it rotates and the upper joint telescopes because it's not really a ball joint, but a greased shank inside a steel sleeve. This system will help stop the endless ball joint replacement cycle and improve the quirky factory steering characteristics. Get rid of the old press-in ball joint headache with the American Iron Off-Road ball joint delete system best suited for your build. More product features and specifications include: * Custom machined press-fit upper and lower cups * Custom 4140 heat-treated hardware with Grade 8 Nylock nuts * PTFE-lined 7/8 in. bearings for smooth operation * 3D-printed plastic dust cap and Viton® seal head to keep debris from tops of each assembly * Open bottom to allow any moisture to evacuate from joint * Customized oversized cups (0.008 in. over) available for axles with enlarged inner C-mount holes from numerous replacements
( 2 )
$714.99
The late-model factory power steering pump on the Mopar Gen III Hemi engines has too much pressure for the steering box on most older muscle cars and trucks, so Holley developed a low pressure power steering pump for Gen III Hemi swaps. These special Saginaw Type II low pressure power steering pumps produce the proper pressure, and the 6-rib billet aluminum pulley is sized to operate the pump at the proper speed when used with the existing drive system on Gen III Hemi engines. The special hardline adapter moves the power steering hose connection to a more accessible location for an easy installation and maintenance. Features and benefits: * Low-pressure power steering pump it—use with factory low-pressure steering boxes on muscle cars and trucks with Gen III Hemi engine * Works with factory "car style" accessory drive system and fits 2003-2008 5.7L and 2005-2010 6.1L Gen III Hemi engines * Also fits some 2009-2013 5.7L and 2011-2013 6.4L with 4.34-inch belt spacing * Prevents damage to steering box on older vehicles * Billet aluminum mount with black anodized finish bolts to existing tapped holes on the left side cylinder head of Gen III Hemi engines * 6-rib billet aluminum pulley with black anodized finish sized for proper pump speed * Power steering pump assembly includes a plastic reservoir * Special hardline moves -6 AN hose connection to a more accessible location
( 1 )
$534.95
Lares new steering gears are manufactured from the same high-quality materials as your original components to provide long-lasting performance. These new steering gear units (not remanufactured) are engineered to OE specifications to ensure proper fit, form, and function, and each new unit is then inspected, adjusted accordingly and filled with a high-quality grease, so they arrive to you ready for installation. Simply verify fitment, and order your new Lares steering gear that's designed to fit your application.
( 101 )
$553.99
PSC Ram Cylinder Assist replacement cylinder and hose kits include a steering assist cylinder, high-pressure hoses, and steering fluid. You can maintain the performance of your Ram to efficiently handle increased torque loads and deliver improved handling with these kits. Service your system with parts you know will fit and function just like the originals; choose only PSC replacement cylinder and hose kits.
Not Yet Reviewed
$515.00
—
$750.00
BDS Suspension offers steering stabilizer kits with Fox 2.0 Performance shocks for a variety of applications, including many Chevy, GMC, Dodge, Jeep, Ram, and Ford vehicles from 1973 and up. The stabilizers are available in single (for stock/lifted) or dual inline (for lifted) designs. These components will enhance the handling of your truck or SUV. Installing larger tires can exert additional force on your suspension, but steering stabilizer shocks can effectively reduce bump steer and steering wheel feedback. BDS mounting brackets are constructed of high-strength steel and can be easily bolted on. FOX and BDS collaborated to custom valve each application, ensuring that it functions perfectly with each BDS Suspension system. Based on FOX race products, the shocks have been redesigned to transform your BDS-equipped truck into a formidable off-road machine, delivering a predictable ride capable of handling the roughest conditions with fade-free performance.
( 2 )
$517.85
Cardone New steering boxes are "built better from the start." The same reverse-engineering experience Cardone has gained from over 45 years of remanufacturing is the foundation of their Cardone CSE Technology. Their engineers incorporate improvements into the new boxes to prevent the "where and why" of typical failure. Cardone New steering boxes feature: * 100 percent computerized testing at load to ensure reliable performance * All rotating and actuating components are properly hardened, ground, and polished to ensure longevity of the components and their respective seals * Cardone Select Engineered (CSE) Technology ensures that all rack and pinion/gearbox units meet or exceed OE form, fit, and function * Computerized spool valve balancing ensures exceptional feel and return ability * Environmentally-friendly coating provides a clean appearance and prevents rust * Supplied with OE-grade seals, O-rings, and boots to provide optimal sealing performance and longevity
( 20 )
$514.99
Superlift dual steering stabilizer kits are essentially shock absorbers for your steering system. They allow unrestricted gradual movement, but resist sudden shock, improving driver comfort and steering ability. These damper kits include two cylinders and mounting hardware for vehicles that are not factory equipped with a stabilizer. They're great for rigs that see extreme duty or have extra-large tires. Numerous models are available, with specific fitment requirements. Click the product application tabs to find the steering damper best suited for your truck or SUV.
( 12 )
$649.99
American Iron Off-Road ball joint delete Ford Super Duty Dana 60 kits feature a split-tapered bushing which expands as preload is added to the assembly, ensuring a precise fit. You can trim the top flange of the bushing based on caster/camber needs, and the kit includes instructions on setup and trimming. Get rid of that old ball joint headache with the American Iron Off-Road ball joint delete system best suited for your ride. More product features and specifications include: * Split-tapered 7075 aluminum bushings with cone washer * PTFE-lined 7/8 in. spherical bearings with C-clip * Viton® seal with machined shim (press fit) * 4130 bearing cups * Grade 12 socket head cap screw (7/8 in.; 170,000 psi tensile strength) * Low-profile 7/8 in. locknut * Press fit systems can be welded in by simply removing the clear zinc coating * High-clearance versions require welding * Off-road use only
Not Yet Reviewed
$714.99
Hitachi offers hydraulic rack and pinions for a wide range of vehicles, particularly import models. The units are made from a combination of high-strength steel alloy for durability and aluminum for weight reduction and better heat dissipation and come with required bushings, tie rod ends and mounting brackets. Precision-machined installation points allow for proper installation of auxiliary components that were on the vehicle originally, such as speed sensitive power steering modules. Designed to meet the exact needs of each specific vehicle, Hitachi rack and pinion assemblies are the premium choice. Order model recommended for fitment on your car or truck.
( 1 )
$554.99
—
$706.99
PSC power steering pumps greatly benefitting rock crawlers running low rpm's. These pumps are used in conjunction with cylinders and hydraulic-assist setups. With modifications, these pumps will work with full hydraulic steering. Whether interested in one piece or the entire kit, PSC power steering pumps will turn your tires, making for fun 4-wheeling. Order the universal or vehicle-specific model recommended for your application.
( 51 )
$701.99
Turn One HP1 power steering pumps are "Stage 1" upgrades over factory stock pumps and available in common GM vehicle fitments with your choice of fittings. These pumps are hand-built with proprietary pump internals specifically designed to reduce unnecessary horsepower consumption from your engine and impart less heat into your power steering system. They're ideal upgrades for vehicle owners who are fed up with pumps overheating or not providing the necessary steering assistance for their vehicles. Drive confidently with a performance HP1 steering pump from Turn One! Features include: * True Type II pump with performance modifications * Reduced horsepower consumption * Reduced fluid temperatures * 1,500 psi pressure capacity * Lightweight aluminum housing * Brand new components * Universal and application-specific models available
( 4 )
$680.00
Is it time for a 4-wheel alignment? If so, then you will probably need one of these SPC Performance camber shims to achieve the proper alignment. They are made of high-quality materials and are designed to be installed with no modifications. Front and rear-wheel alignment directly impacts tire tread wear. SPC Performance camber shims are available in different styles and thicknesses, so we are sure to have one to correct your alignment problems.
( 8 )
$591.99
Cardone new rack and pinion units are built better from the start. Cardone uses what they've learned from remanufacturing, as to where--and why--original parts fail. Their engineers then incorporate improvements into the Select rack and pinions, making them better than the originals. Cardone new rack and pinion units feature: * 100 percent computerized testing at load to ensure reliable performance * All rotating and actuating components are properly hardened, ground, and polished to ensure longevity of the components and their respective seals * Cardone Select Engineered (CSE) Technology ensures that all rack and pinion/gearbox units meet or exceed OE-form, fit, and function * Computerized spool valve balancing ensures exceptional feel and return-ability * Environmentally-friendly coating provides a clean appearance and prevents rust * Supplied with OE-grade seals, O-rings, and boots to provide optimal sealing performance and longevity
( 33 )
$518.99
—
$759.99
For over 40 years, Cardone's innovative remanufacturing processes have provided a high-quality, lower-cost alternative to new replacement parts. Cardone remanufactured rack and pinion units feature all new spool valve seals and rack donut seals are installed to eliminate internal leaks and ensure reliable performance. The racks are surfaced to precise specifications to prevent leaking between chambers and extend unit life. All new O-rings and lip seals ensure no leaking and long-lasting performance. and all units are 100 percent computerized hydraulic tested for proper flow, leakage, and performance.
( 84 )
$532.99
—
$603.99
Edelmann offers rack and pinion assemblies for a broad range of vehicles. These hydraulic power-assist standard replacements feature aluminum construction and include inner tie rods. Every unit has a unique Designated Numeric Asset (DNA) number permanently etched on the part and includes a matching individual test report, ensuring high standards for durability and performance. Order the model recommended for fitment on your application.
( 1 )
$512.99
Dorman replacement steering knuckles are precision-engineered and rigorously tested to OEM tolerances to fit your stock application without making any modifications. They are manufactured from premium materials to provide a reliable fit and quality. The knuckles are available for passenger cars, trucks, and SUVs, so they have your application covered.
( 2 )
$508.99
Dorman Premium Chassis suspension kits are engineered to deliver factory-like feel and performance on specific vehicles. Each application-specific kit comes with all the necessary components required to help ensure a complete repair for both the left and right side of the vehicles suspension. These front end kits use extended-life components with low friction polymer bearings and premium synthetic grease to ensure a long service life. Dorman Premium Chassis gives repair professionals and vehicle owners greater freedom to fix cars and trucks. For decades, they have been driving new solutions for the motor vehicle aftermarket offering replacement products engineered to save time and money and increase convenience and reliability. Select the kit designed for your application.
Not Yet Reviewed
$553.99
—
$834.99
Lares offers brand new power rack and pinions for a variety of applications. Engineered to OE specifications, each unit is inspected, adjusted, and hydraulically tested. These assemblies convert the rotational motion of your steering wheel into the linear motion needed to turn the wheels. Rack and pinions are backed with a Limited Lifetime Warranty (or one-year for commercial use). Order the model recommended for your vehicle.
( 8 )
$515.99
Maintaining proper wheel alignment is not only fundamental in extending the tread life of your tires, it also helps you to safely control the vehicle. Moog cam bolt kits are designed to assist with camber and toe-related issues, returning the vertical angles to OE specifications or allowing you to make adjustments for more precise handling than that provided by the factory settings. Moog adjustment hardware kits afford you improved alignment, longer part life, and ease of installation.
( 15 )
$541.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
