More Power in Every Purchase - Join the Summit Rewards Program Today!

More Power in Every Purchase - Join the Summit Rewards Program Today!

Beef up Your Bronco With These Deals - Shop Now!

1995 Steering Components

Part Groups

Results 1 - 9 of 9

PSC XD Steering Gears

PSC XD steering gears feature 45mm bearings and sector shafts to eliminate the flex that could cause seals to fail. They feature ratios and components that make parking easier, highway driving more stable, and maneuvering effortless. OEM steering gears in some trucks could be a problem, until now. Make handling your vehicle a pleasure with PSC XD steering gears.

4.92 out of 5 stars ( 13 )

$899.99

PSC Big Bore XD Steering Gears

PSC Big Bore XD steering gears are direct replacements for your inadequate steering gear. They feature larger piston diameters, which increase the torque output of the steering gear—allowing your rig to overcome steering issues due to larger tires and/or locking differentials that you've installed. PSC Big Bore XD units are assembled using all new components and featuring their exclusive new gear housing--not reworked core housings, but 100 percent new cast and machined housings. PSC also offers cylinder-assist versions for vehicles that have 38 in. and bigger tires and larger drivelines. Order the steering gears designed for fitment with your make and model.

4.83 out of 5 stars ( 24 )

$995.00

$1,050.00

Trail-Gear Power Flow Power Steering Pump Upgrade Kits

Trail-Gear Power Flow power steering pump upgrade kits remedy a common flaw in Toyota trucks. The stock pump is just barely able to supply the volume and pressure needed to run hydraulic-assist steering—putting out 1,300 psi at only one gallon per minute. The original pump is not able to provide enough fluid to run both the stock steering and the demands of a ram, especially at low rpm. Drilling out the restrictor plates in a stock pump for more volume often leads to pump failure. The answer is a replacement "TC" style pump. This provides the full fluid volume your steering box and ram are looking for, even at idle. These kits include a 1,650 psi pump, pump bracket, reservoir, reservoir bracket, belt, fittings, hoses, and hardware. The pump kits are designed to work with stock or ram drilled IFS power steering boxes. Additional notes: * The pump and bracket are designed to fit all Toyota 4-cylinder 4WD motors from 1979-95 * A large power steering fluid cooler (included) is required on the low-pressure side of the system * Pump bracket works in conjunction with stock idler bracket * If your truck is not currently equipped with power steering, you will need to purchase the idler bracket and replace the steering gearbox with one designed for use with power steering * The stock fan belt will not work with this pump and will need to be replaced with a Napa 9430 belt. Belt is included with kit. * Note: Never use ATF fluid or a semi-synthetic blend. This will void the warranty. It's okay to use standard power steering fluid or a full synthetic.

5.0 out of 5 stars ( 2 )

$899.99

BMR Manual Rack and Pinion Conversion Kits

BMR Suspension has developed a manual rack and pinion conversion kit that will eliminate bump steer and allow for more header clearance. They started with a clean slate and came up with kits for practically any application, giving you accurate control and steering response. BMR manual rack and pinion conversion kits have a straightforward, bolt-in installation requiring no fabrication or welding. All mounting hardware and installation instructions are included.

5.0 out of 5 stars ( 1 )

$979.95

$1,009.95

Flaming River Mustang Power Rack and Pinions

These Flaming River Mustang power rack and pinions are perfect for street rods, musclecars, and as stock replacements in Ford products that use the Mustang II front steer design. They offer over 6 in. of rack travel, which provides the maximum turning radius for classic and street rod applications. Inside, the pinion gear set is improved over the OE factory design and is engineered to provide ultimate strength characteristics. Outside, they are significantly different from previous designs. The Flaming River Mustang II power rack and pinions use a billet aluminum spool valve housing with a heat sink design for lower operating temperatures. They also feature a longer rack piston tube for added strength and increased rack stability. Their low-profile pressure hose design reduces most installation obstacles. They are light, yet strong, weighing 12 lbs. less than the original stock cast racks. Available with a matched, speed-sensitive power steering pump with V-belt or serpentine pulleys, the Flaming River Mustang II power rack and pinions make an excellent steering choice for your ride.

3.6 out of 5 stars ( 10 )

$981.99

Trail-Gear Power Steering Pumps

Providing improved power steering for off-roading, Trail-Gear power steering pumps replace your stock models with high-performance reliability. Their TC-style pumps are built to handle extreme heat, with each one receiving a bench test to ensure quality. They are available in two styles -with or without an anodized aluminum pulley. When you are on the road, stock is okay--but for off-road, you need trail-tested gear. Order the Trail-Gear power steering pumps best suited for your application.

4.17 out of 5 stars ( 6 )

$899.99

Flaming River Mustang Steering Shafts

Flaming River Mustang steering shafts utilize two smooth needle-bearing universal joints, a prefabricated shaft that bolts directly to the OEM column, and a weldless intermediate shaft for easy installation. This design eliminated the rag joint for better steering response and appearance. Some of these shafts are available in steel and aluminum for power or manual rack and pinions.

5.0 out of 5 stars ( 22 )

$809.99

$832.99

PSC Replacement Steering Boxes

Not getting a response? PSC replacement steering boxes will respond appropriately to restore handling to what it was meant to be. These gearboxes offer the right fit and performance so that your steering input effort results in the corresponding wheel output. Retain your stock performance with PSC replacement steering boxes. Order the model designed for fitment with your vehicle.

5.0 out of 5 stars ( 1 )

$995.00

Flaming River Manual Rack and Pinions

Flaming River manual rack and pinions are built from lightweight aluminum castings—and feature chrome plated center tubes and two mounting holes. Designed to meet the standards of professional street rod and race car chassis builders, they weigh less than 15 lbs. each. These rack and pinions are a great way to streamline the engine compartment while maintaining smooth, responsive steering.

4.45 out of 5 stars ( 53 )

$1,044.99

  • 1
  • Page 1 of 1

Modal Header