Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
Steering Components
Showing In Stock Items. Show All 37 Items.
Flaming River Microsteer Electric Power Assisted Steering Kits
Flaming River Microsteer electric power assisted steering kits can easily be fitted to virtually any vehicle where manual steering currently exists. There's no need to change your steering rack or fit a hydraulic system. These kits allow you to adjust the amount of assistance by using a rotary potentiometer—or you can make the system speed sensitive by connecting a wheel speed signal to the tuning box. A mode selection switch on the box allows you to choose your preferred method—manual or wheel speed. Flip the switch and make your vehicle easier to steer or boost the horsepower a bit with a Flaming River Microsteer electric power assisted steering kit. Items and notes: * Motor/gearbox unit (MGU) * Electronic control unit (ECU) * Tuning box * Wiring harness * 11/16 in.-36 input and output shafts
( 3 )
$1,839.99
EPAS Performance Electric Power Steering Kits
EPAS Performance electric power steering kits provide modern power steering for your classic car. These performance systems are available to outfit a wide range of vintage and classic vehicles from 1920-1980. An easy step-by-step installation manual is available online for each of the kits that EPAS offers. There is no major or irreversible modifications made to your vehicle, as everything is located under your dash and is almost, if not completely, invisible. How the systems work: The computer measures the amount of effort on the steering wheel and amplifies it with the aid of the electric motor. A potentiometer allows you to have more or less assistance, so you can adjust the amount of power assist. For example, you can have maximum power assist while on a parking lot, and less on the highway. Select the EPAS Performance electric power steering kit for your application needs. EPAS Performance electric power steering kits include: * Electric motor unit * Mounting hardware * Prewired control module * Some kits may also be available with steering columns
( 23 )
$1,548.99
—
$1,942.99
EPAS Performance Hydroelectric Pump System Kits
EPAS Performance's Hydroelectric Pump System has a program that works with an angle sensor and CAN protocol. The converter talks to the pump via the angle sensor, ramping up the system's pressure as needed. There is no noticeable delay or drop in pressure when input at the steering wheel is exerted. This steering conversion kit includes 6 ft. of high-pressure sending hose, 6 ft. of low-pressure return hose, and the power cords are 10 ft. in length. An oil cooler can be added for racing applications. The wiring harness is essentially plug-and-play, and only requires a hot ignition source and full battery power. System draw is anywhere between 1 amp to 45 amps, spending most of its time in the lower amp range. Maximum pressure of the unit is rated at 1900 psi @ 5 gpm; and the absolute maximum length of the pressure hose and return lines is 17 ft. INCLUDED IN KIT: * EPAS Performance Hydroelectric Pump * Universal mounting bracket * High-pressure sending hose * Low-pressure return hose * Pre-wired control module
Not Yet Reviewed
$1,849.99
Flaming River 1955-57 Chevy Power Rack and Pinion Cradle Kits
Flaming River 1955-57 Chevy power rack and pinion cradle kits make your dream ride a dream to drive! Flaming River makes your classic even better with their unique and easy-to-install cradle kits. The true fixture welded mounting cradle fits between the frame rails and bolts in place using the original chassis location--no suspension modifications are needed. Plus, by mounting the rack on the cradle system, you are reinforcing the Chevy chassis and providing increased ground clearance. Kits are available without columns or with your choice of polished or paintable tilt columns--something your '57 never had! Tri-five Chevys are probably some of the most recognized American classics, and to restore one is many an enthusiast's dream. Give your 1955-57 Chevy perfect modern steering from Flaming River 1955-57 Chevy power rack and pinion cradle kits.
( 4 )
$1,929.99
PSC Hydraulic Assist Steering Systems
Oversize tires, lockers, and rocks will quickly have your stock steering system whining for help. Increase turning force by an average of 50 percent with PSC hydraulic assist steering systems. They feature a new hydraulic-assist steering cylinder with all required mounting brackets, hoses, and fittings. Their new steering gear boxes have been modified for cylinder assist. The valving remains stock to allow OEM handling, control, road feel, and no oversteer. PSC hydraulic assist steering systems turn taller tires like they're stock.
( 12 )
$1,920.00
PSC Hydraulic Steering Kit Replacement Components
From steering assist cylinders to mounts and more, PSC offers hydraulic steering kit replacement components to provide the steering power you need to tackle the toughest trails. Go where you want to go with PSC! Order the steering replacement components designed for your application needs.
Not Yet Reviewed
$1,695.00
—
$1,755.00
PSC Power Steering Conversion Kits
PSC power steering conversion kits will transform your rig's handling capabilities. These kits contain quality components that will upgrade your Jeep and allow for easier, better maneuvering on the trails and off.
Not Yet Reviewed
$1,970.00
Flaming River VDOG Variable Angle Gears
Flaming River VDOG variable angle gears have a strong aluminum housing—available in either cast or billet—and the output shaft is 3/4-36 in. for compatibility with universal joints. Each unit is gear driven without any chains or sprockets. It can be mounted in horizontal or vertical positions—ideal for cab-over vehicles, T-Buckets, and specialty builds with big motors and tight firewall clearance. Order the material and finish you prefer. Additional features: * 90 degree gear box with a 35 degree variable angle shaft * Articulating ball design for maximum adjustability * 1:1 ratio to maintain rack and pinion or steering box gear ratio * Award-winning: 2019 SEMA Best Engineered New Product and Best New Street Rod Product
Not Yet Reviewed
$1,549.99
UniSteer Rack and Pinion Conversion Kits
From the people who doing steering right--UniSteer rack and pinion kits deliver the feel and performance of precision. Their conversion kits are well-engineered and built to match the factory suspension, so installation is easy and performance is assured. UniSteer bolt-on rack and pinions are offered in both manual and power kits to fit your application needs. When you want to improve handling, reduce effort, and enhance responsiveness of your driving experience in your classic ride, turn to the experts at UniSteer for a rack and pinion conversion kit. UniSteer stands behind their products with a 2-year, Unlimited Mile Warranty.
( 9 )
$1,679.99
Global West Suspension Power Steering Conversion and Upgrade Kits
Improve overall driving performance and prevent your car from wandering over bumps on the road with one of these power steering conversion and upgrade kits. Global West is known for manufacturing high-quality suspension components to solve commonplace issues, such as bump steer, and to help improve handling on early model vehicles. Bump steer is the undesirable result of wheel to toe-in or toe-out when the suspension moves up or down. Global West power steering upgrade systems are simple bolt-on kits which remove much of the unwanted wander in your steering. These suspension power steering conversion and upgrade kits include: * Special mounting bracket which sets the angle of the steering box for the correct geometry (a new idler arm is also required) * Dual ball joint-type center link * Inner tie rods * Tubular adjusting sleeves * Outer tie rods * Center link adapter * Fast-ratio steering gear * Pitman arm * Steering coupler * Intermediate steering shaft * Hardware and a new sway bar
Not Yet Reviewed
$1,652.09
PSC Power Steering Pump Kits
PSC power steering pump kits are engineered specifically to power cylinder assist systems, providing the required pressure and flow of power steering fluid. Includes: * Remote reservoir * 4 qts. of SWEPCO 715 Power Steering Fluid * Fluid cooler * SR-VT fluid anti-splash valve * Pulley * Bracketry * Hardware * Fittings, and pre-assembled hoses
Not Yet Reviewed
$1,550.00
—
$1,750.00
Scott Drake Power Steering Conversions
It's like feeling the road for the very first time! Your classic Mustang will be much more fun to drive with a power steering conversion from Scott Drake. The conversion boxes are remanufactured up-to-date integral power steering gearboxes that will provide a true modern power steering feel, feedback, and a sporty 16:1 ratio. They bolt directly to the factory mounting location and to fit the stock pitman arm without any interference or modification of the shock tower. Drake offers kits to convert manual to power steering and to upgrade factory power to modern power steering. Eliminate leaky control valves and sloppy steering; enjoy driving your classic with a Scott Drake integral power steering conversion kit.
Not Yet Reviewed
$1,649.95
Rock Jock High Steer Knuckle Kits
Rock Jock High Steer Knuckle Kits for all Jeep JL and JT models is a game changer, packed with features that improve the off-road capabilities, as well as the on-road drivability of your vehicle! Intended for use on factory axles, these kits replace the inferior factory aluminum knuckles with cast iron high steer knuckles that exceed OEM quality and strength. They raise the tie rod 2 3/4 in. and the drag link 2 1/2 in., moving the rods out of the way of rocks and helping to restore factory steering geometry for improved drivability and overall road comfort on a lifted Jeep. The new knuckles also feature two adjustable steering stop locations for full lock-to-lock adjustability which helps ease the strain on steering components at full lock. Stock ball joints, unit bearings, axles, brakes and dust shields are all retained. Rock Jock's Currectlync steering included in these kits features revolutionary high articulation forged chromoly drag link that incorporates a unique organic shape with many compound curves—which can only be achieved via forging, resulting in maximum up-travel capabilities. The tie rod is a 42mm (1 5/8 in.) diameter chromoly tube. All Currectlync steering ends are forged steel and comparable in size to those found on modern 1-ton trucks. Given the dramatic geometry changes vehicle lifts impose, the kits include a trac bar geometry relocation bracket with a fully integrated: a) steering stabilizer shock mount, OR b) ram assist steering mount (depending on the kit you order). The trac bar mounting point is raised 2 1/2 in., to correct geometry, preventing any bump steer. * a) The steering stabilizer shock mounting point portion of the bracket moves the shock up and behind the new tie rod location, far from its vulnerable stock location. OR.... * b) The ram assist mount portion of the bracket provides an easy bolt-up anchor point for your hydraulic assist ram, as well as a lower skid plate, incorporated into the bracket, to protect the ram from rocks. Kits Include: * Left side high steer steering knuckle * Right side high steer steering knuckle * Currectlync Drag Link * Currectlync Tie Rod * Trac bar relocation and ram mount axle bracket -OR- Trac bar relocation and stabilizer shock mount axle bracket (depending on kit) * Stabilizer shock tie rod clamp -OR- Ram assist tie rod clamp (depending on kit chosen)
Not Yet Reviewed
$1,930.00
PSC Full Hydraulic Steering Systems
Rock Crawlers, Ultra 4 Racers, and Rock Racers all need extra help turning locked axles with large tires over rocks and other wild terrain. PSC full hydraulic steering systems turn up to 44 in. tall tires as smooth as glass. They feature new hydraulic cylinders, orbital control valves, and full hydraulic hose kits. Most of the included steering stub collars and brackets require welding. These quick ratio systems change valving and should be used sparingly on paved roads. PSC full hydraulic steering systems are designed to ease arm-strong issues on full time off-road machines.
( 6 )
$1,760.00
—
$1,977.50
PSC Ram Cylinder Assist Steering Kits
PSC Ram Cylinder Assist steering kits are engineered to efficiently handle increased torque loads due to the installation of larger-than-stock tire sizes, upgraded aftermarket axles, and/or locking differentials. They deliver improved handling characteristics without oversteer and a familiar level of road feel without increased driver effort, making them perfect for daily driven, on-the-road use. Kits are available to cover 2003-22 Ram trucks; choose the kit designed for your truck's model year. Features of PSC Ram Cylinder Assist kits: * Cylinder Assist steering gearbox * Steering assist cylinder * Hose kit * Brackets and hardware * SWEPCO power steering fluid
Not Yet Reviewed
$1,965.00
PSC Electric Power Steering Pump Kits
PSC electric power steering pump kits feature direct-fit design and plug-and-play connectors for easy replacement of your factory original. You also get the exclusive PSC cylinder-assist mapping and increased PSI output (application-dependent) for improved steering feel. The fluid cooling system contains internal and external cooling fins, and the included lines feature billet fittings. The high performance fluid is low-viscosity, with a broad temperature range that can be used for both electric and conventional pumps. Whether you've got a daily driver or prefer challenging off-road venues, PSC electric power steering pump kits will help keep the good times rolling! Other features and specifications include: * Billet return fitting as improvement over plastic factory fitting * Low-profile heat sink fluid cooling system * PSC high-performance electric power steering fluid
Not Yet Reviewed
$1,740.00
On Sale
Flaming River 1967-69 Camaro Manual Rack and Pinion Cradle Kits
Flaming River 1967-69 Camaro manual rack and pinion cradle kits update your classic muscle with manual steering that feels like power! Your big or small block Camaro can enjoy these precision-designed, American-built cradle systems. Flaming River manual rack and pinion kits feature their patented, welded cradle that structurally reinforces the rack and bolts in your existing chassis mounting locations--no cutting, welding, or drilling is required! These lighter, more responsive systems are available with or without tilt columns (a key column is available for 1969 kits) and billet swivel floor mounts. Universal joints, wiring connectors, and mounting hardware are also included. Enjoy travel and ratio with a full turning radius--steer your classic with bolt-on Flaming River 1967-69 Camaro manual rack and pinion cradle kits.
Not Yet Reviewed
$1,730.99
