Availability
Showing In Stock Items. Show All 65 Items.
UniSteer rack and pinions are designed to provide precision steering for easier driving. Made from cast aluminum with a variety of finishes available, these replacement racks can be ordered to complement either manual or power-assist configurations. They're offered in fitment applications for a wide range of year, make, and model vehicles. Accessories included will depend upon the model you select. Better steering control begins with UniSteer! UniSteer stands behind their products with a 2-year, Unlimited Mile Warranty.
( 54 )
$1,302.99
—
$2,682.99
UniSteer Camaro/Nova rack and pinion kits are superior steering components designed with racers in mind. They're engineered to match the factory geometry for specific Chevy model years—resulting in no-bump steering. These racks come mounted on a custom bracket that makes installation a breeze. The unit mounts to the rear of the crossmember, bolting to the lower stock control arm bolts. The outer tie rod ends are bolted to the stock steering arms; no fabrication is required. Compact and lightweight, the parts offer maximum ground clearance and can drop up to 65 lbs. off the stock front end. UniSteer rack and pinion kits also include outer tie rods, mounting bracket, hardware, and instruction sheet for installation. Order the conversion kit tailored for fitment on your vehicle. UniSteer stands behind their products with a 2-year, Unlimited Mile Warranty.
( 18 )
$686.99
—
$1,143.99
Classic looks are great but the handling ... well, not so much. Classic Performance has designed, engineered, and tested their power steering conversion kits to make your vehicle navigate as good as it looks! CPP kits include their 400 or 500 Series power steering boxes that utilize the latest steering technology and assure smoother handling of your classic/vintage ride. Other kit components may vary, but whether your special ride is a full size Chevy car or a Ford pickup Classic Performance will make it better with one of their many power steering conversion kits.
( 120 )
$719.99
—
$837.99
Don't nickel and dime your steering linkage upgrade. Instead, save time and money by purchasing complete Classic Performance steering linkage kits. Any wear can significantly add to sloppy steering. Each component in these kits is essential for accurate alignment; they're a must when upgrading your classic to a power steering box for maximum performance and handling. No modifications are required. Classic Performance kits are available with or without tie rod assemblies.
( 39 )
$318.99
Classic Performance 500 Series power steering box upgrade kits feature the only boxes on the market today manufactured with one-piece housing and all-new parts, and retaining the factory pitman arm. They have been factory-tested to ensure quality and reliability. CPP 500 Series power steering boxes feature a 14:1 ratio that provides superior directional control and road feedback, as well as a more stable feel to the driver. Their open-center, rotary-type valve provides smooth operation throughout the steering range. The integrated mounting cast-in bosses eliminate the need for external brackets and shims.Classic Performance 500 Series power steering box upgrade kits include a new pitman arm, idler arm, and centerlink.
( 23 )
$598.99
—
$684.99
Flaming River 1988-98 Chevy C1500 truck power rack and pinion cradle kits are direct bolt-ins with precision welded cradles manufactured using a 3/8 in. steel plate to assure there is no flexing. Each kit adapts to the original steering column and includes a new slip shaft with U-joints and a hose kit. They have been designed for use with the original power steering pump and the travel bar maintains original geometry. Features: * Designed for use at factory ride height or with 4/6 lowering kit * Solid plate 3/8 in. steel for increased strength * Bolts in place of steering box and idler arm using OE mount locations * Precise, modern steering with no cutting, drilling, or welding to chassis * Features new front steer power rack and pinion * Rack and pinion features .98 in. rack shaft for increased strength * Billet servo valve for cooler operation * Lifetime serviceability and Flaming River tested and certified Power rack and pinion cradle kit includes: * Mounting hardware * Universal joints and shafts * Rack and pinion cradle system
Not Yet Reviewed
$2,508.99
Detroit Speed Detroit tuned steering rack and pinions have been optimized to provide an exceptional modern performance feel on the street and on the track. They're available in both standard and narrow widths that are 24.5 in. and 21.5 in., respectively. They feature valving that's specifically designed to provide the increased performance feel found in late model performance vehicles, and they're made from all-new, superior-quality components for long-lasting durability. Detroit Speed Detroit tuned steering rack and pinions come complete with polyurethane mounting bushings and have an internal inner tie rod boot balance tube. So, if you want nothing but the best when it comes to your hot rod or street musclecar, Detroit Speed Detroit tuned steering rack and pinions are your answer.
Not Yet Reviewed
$524.95
Lares offers brand new power rack and pinions for a variety of applications. Engineered to OE specifications, each unit is inspected, adjusted, and hydraulically tested. These assemblies convert the rotational motion of your steering wheel into the linear motion needed to turn the wheels. Rack and pinions are backed with a Limited Lifetime Warranty (or one-year for commercial use). Order the model recommended for your vehicle.
( 8 )
$406.99
—
$512.99
Lares new steering gears are manufactured from the same high-quality materials as your original components to provide long-lasting performance. These new steering gear units (not remanufactured) are engineered to OE specifications to ensure proper fit, form, and function, and each new unit is then inspected, adjusted accordingly and filled with a high-quality grease, so they arrive to you ready for installation. Simply verify fitment, and order your new Lares steering gear that's designed to fit your application.
( 111 )
$296.99
—
$345.99
From the people who doing steering right--UniSteer rack and pinion kits deliver the feel and performance of precision. Their conversion kits are well-engineered and built to match the factory suspension, so installation is easy and performance is assured. UniSteer bolt-on rack and pinions are offered in both manual and power kits to fit your application needs. When you want to improve handling, reduce effort, and enhance responsiveness of your driving experience in your classic ride, turn to the experts at UniSteer for a rack and pinion conversion kit. UniSteer stands behind their products with a 2-year, Unlimited Mile Warranty.
( 9 )
$2,743.99
—
$4,037.99
Drivers who demand precision steering capabilities on their half-century old restorations take notice at the mere mention of Flaming River 1965-69 Impala/Caprice power rack and pinion cradle kits. These components provide a full lock-to-lock turning radius with an adjustable pinion angle. A travel bar design properly positions steering pivot points to the original location and delivers the original turning radius. These systems feature a stabilizer guide clamp for added stability when driving, and use the factory tie rods to connect the travel bar to your vehicle's spindles. The cradle kits install with basic hand tools in the original mounting holes for the steering box and idler arm assembly--no cutting, drilling, or welding is required. (Some models do not include a column and/or power steering pump.) Most kits include: * Mounting hardware * Wiring connector * Universal joints and shafts * Rack and pinion cradle system * Fluid reservoir * Power steering pump and pulley * Floor shift tilt steering column (available on some models)
Not Yet Reviewed
$3,476.99
BMR Suspension has developed a manual rack and pinion conversion kit that will eliminate bump steer and allow for more header clearance. They started with a clean slate and came up with kits for practically any application, giving you accurate control and steering response. BMR manual rack and pinion conversion kits have a straightforward, bolt-in installation requiring no fabrication or welding. All mounting hardware and installation instructions are included.
( 1 )
$979.95
—
$1,009.95
Flaming River Impala/Caprice power rack and pinion cradle kits help deliver precision steering on your restoration vehicle. They have a full lock-to-lock turning radius and an adjustable pinion angle. These assemblies also utilize a travel bar design to properly position the steering pivot points to the original location and turning radius. The stabilizer guide clamp provides added stability while driving. Flaming River rack and pinion systems use the factory tie rods to connect the travel bar to your vehicle's spindles. These kits install with basic hand tools in the original mounting holes for the steering box and idler arm assembly—and no cutting, drilling, or welding is required. Impala/Caprice kits include: * Floor shift tilt steering column * Mounting hardware * Wiring connector * Universal joints and shafts * Rack and pinion cradle system * Fluid reservoir * Power steering pump and pulley
Not Yet Reviewed
$3,622.99
Summit Bucks
ACDelco GM Genuine Parts rack and pinion assemblies convert the rotation of your steering column to the side-to-side motion needed to steer your front or rear wheels. These assemblies are genuine GM recommended replacements for your vehicle's original components. They have been manufactured to fit your GM vehicle offering you with the same performance, durability and service life you have come to expect from General Motors.
Not Yet Reviewed
$1,601.99
Flaming River 1957 Chevy Power rack and pinion cradle kits engineered the popular rack and pinion cradle systems for Chevy vehicles. This true fixture welded mounting cradle fits between the frame rails and bolts in place using the original chassis location. No suspension modification is required and the system installs easily with hand tools. Full turning radius is engineered into the system.
Not Yet Reviewed
$2,118.99
—
$3,405.99
Flaming River 1968-74 Nova Power rack and pinion cradle kits bolt into the existing chassis with no suspension modification. The power rack and pinion provides a quick steering ratio with full turning radius, installs easily using the existing chassis hole locations. They also feature a stronger 1 in. diameter rack gear and more than 6 in. of travel and full turning radius.
Not Yet Reviewed
$2,249.99
—
$2,559.99
Oversize tires, lockers, and rocks will quickly have your stock steering system whining for help. Increase turning force by an average of 50 percent with PSC hydraulic assist steering systems. They feature a new hydraulic-assist steering cylinder with all required mounting brackets, hoses, and fittings. Their new steering gear boxes have been modified for cylinder assist. The valving remains stock to allow OEM handling, control, road feel, and no oversteer. PSC hydraulic assist steering systems turn taller tires like they're stock.
( 12 )
$2,226.99
Convert your steering box application to Flaming River 1970-81 Camaro manual rack and pinion steering--without modifications! Their cradle kits offer a lighter, more responsive steering system for your classic ride. These unique Flaming River cradle kits utilize your Camaro's original inner and outer tie rod ends, maintaining the original pivot position and making installation easier. No cutting, welding, or drilling to the chassis is required--simply bolt the cradle into the existing steering box holes! With your kit, you'll receive universal joints, a shaft support bearing, a mounting clamp, hardware, a billet swivel floor mount, and, of course, their patented rack and pinion cradle system. Kits are available with or without tilt key columns. Update your classic to enjoyable driving with Flaming River 1970-81 Camaro manual rack and pinion cradle kits.
Not Yet Reviewed
$2,075.99
—
$2,721.99
Flaming River 1967-1969 Camaro power rack and pinion cradle kits make it easy to enjoy modern comfort. These direct bolt-in steering kits feature their patented rack and pinion cradle system offering a quick steering ratio with a full turning radius! These power kits are fluid and pressure-tested and certified. Swap out your tired old system and transform your classic muscle into modern muscle you'll enjoy driving. Bolt up Flaming River 1967-1969 Camaro power rack and pinion cradle kits.
( 3 )
$2,073.99
—
$3,432.99
Swap your steering box setup for a lighter, more responsive modern steering system in your classic. Flaming River 1970-81 Camaro power rack and pinion cradle kits utilize your Camaro's original inner and outer tie rod ends, maintaining the original pivot position and making installation easier. No cutting, welding, or drilling to the chassis is required--simply bolt the cradle into the existing steering box holes. The kits include your choice of tilt key columns or no-column, a stronger 1 in. rack gear, a billet-joint and column adapter, mounting hardware, a polished aluminum mounting reservoir, and a power steering pump and pulley. All included to allow you more than 6 in. of travel and a full turning radius. Enjoy driving your classic car with this upgrade-- Flaming River 1970-81 Camaro power rack and pinion cradle kits.
( 2 )
$2,572.99
—
$3,687.99
Flaming River 1968-72 Chevelle power rack and pinion cradle kits modernize and strengthen your current steering system. The precision JIG-welded units install with basic hand tools into your stock steering mounting holes, beefing up your rack gear and still allowing for a full turning radius. Whether you have a small or big block engine, these kits use a unique travel bar system that connects new tubular inner tie rod ends to the original pivot points to reduce bump steer. Numerous kits are available with or without a tilt column and steering pump; and most include wiring connectors, universal joints and shafting, mounting hardware, a billet swivel floor mount, and a polished aluminum mounting reservoir. Enjoy an updated steering system that's lighter and stronger with a Flaming River 1968-72 Chevelle power rack and pinion cradle kit.
( 1 )
$3,506.99
—
$4,813.99
Flaming River manual rack and pinions are built from lightweight aluminum castings—and feature chrome plated center tubes and two mounting holes. Designed to meet the standards of professional street rod and race car chassis builders, they weigh less than 15 lbs. each. These rack and pinions are a great way to streamline the engine compartment while maintaining smooth, responsive steering.
( 54 )
$993.99
—
$994.99
Flaming River 1955-56 Chevy Power rack and pinion cradle kits deliver precision steering on your restoration vehicle. Their Billet-Power rack and pinion systems allow for a full turning radius. They are engineered to replace the early long shaft steering box. By mounting the rack on the cradle, they not only reinforce the chassis, but also provide increased ground clearance. The true fixture-welded mounting cradle fits between the frame rails and bolts in place using the original chassis location with no suspension modification. Order the model recommended for your specific application.
( 2 )
$2,125.99
—
$3,262.99
Flaming River 1967-68 Camaro power rack and pinion cradle kits can upgrade the steering system on your classic musclecar! These direct bolt-on systems are stronger, lighter, and more responsive than original equipment. Like Flaming River's manual setup, the power rack and pinion provides a quick steering ratio with full turning radius. The units install using the existing chassis locations on late '60s Camaros and Firebirds. They're available with or without the steering column.
( 1 )
$2,339.99
—
$2,706.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
