Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
Chassis Components - Frame Brace, K-Members & More
Showing In Stock Items. Show All 25 Items.
Rein Automotive Anti-Vibration Mounts
Anti-vibration parts dampen vibration harmonics from the engine and driveline components to rest of the vehicle, reducing vibration and noise which can be felt and heard while the vehicle is in operation. Rein Automotive anti-vibration mounts match the design and function of the OE parts. Select the mount needed for your application.
Not Yet Reviewed
$5.99
Global West Suspension Shock Crossmembers
Global West shock crossmembers provide the needed support to the rear shock mount area on specific year/make and model vehicles. The reason for the rear shock mount is due to the use of air shocks, as well as coilover applications. When installing a coilover kit or air shock, you're transferring the load of the cars weight from the lower control arm location to the shock location, which was never designed to support the weight of the vehicle. When you add shock crossmembers, they strengthen that area and support the new load, reducing the possibility of damaging the frame at that location. When you need quality suspension parts, choose Global West Suspension.
Not Yet Reviewed
$157.89
RideTech MOMENTUM Chassis Kits
Ridetech, a leader in air and coil-over suspension systems for more than 30 years, proudly announces the launch of its MOMENTUM chassis kits. This all-new platform gives classic muscle car enthusiasts a clean-slate foundation for their next project—delivering modern handling, increased performance, and design flexibility beyond the limits of factory frames. Builders can now enjoy the benefits of a fully engineered chassis while tailoring the suspension to their preferred style of driving, whether that's comfortable street cruising, high-performance autocross, or full track use. Key engineering highlights include: * RideTech's MOMENTUM Chassis Series is a new platform for classic muscle cars, offering modern handling, optimized suspension, and modular options, initially for 1968-1972 models * Optimized suspension geometry—the chassis re-engineers pickup points to improve camber gain, caster, roll center, and Ackermann steering geometry * Enhanced stability—the chassis is significantly stiffer than a stock frame, which reduces flex and increases structural rigidity for more predictable handling * Improved cornering—a new integrated sway bar helps reduce body roll and improve balance, leading to sharper cornering and greater stability * Confidence-inspiring control—the design provides improved handling for both daily driving and more demanding situations like autocross or track events * Increased tire and wheel clearance—the chassis is engineered to accommodate larger, modern wheel and tire sizes that would not fit on a factory chassis * More aggressive fitment—allows for wider tires (e.g., up to 275mm front and 295mm rear) with room for larger fitments, especially when combined with mini tubs in the rear * Adjustable ride height—the system allows for roughly a 2-inch drop from stock but can be adjusted to the desired ride height * Kit offers modular suspension options that allow for air or coilover setups * Chassis is compatible with existing Ridetech A-body suspension components * Engine and transmission flexibility provides provisions for various motor mount plates (small block Chevy, Olds, Pontiac, Buick, GMLS, or Gen 5 LT) and features an adjustable crossmember that adapts to popular automatic and manual transmissions
Not Yet Reviewed
$19,650.00
Roadster Shop SPEC Chassis Kits
Roadster Shop SPEC chassis kits offer Roadster Shop quality at an affordable price point. The SPEC Series is an engineering-focused approach, using the latest in manufacturing technology, to build the lightest, strongest, and easiest-to-install complete chassis systems. These technologies have been used to streamline procedures resulting in lower cost and shorter lead times. The SPEC independent front suspension is engineered to deliver outstanding performance in a user friendly package. It features proprietary suspension geometry designed to provide the best balance of ride quality and performance in its class. Available as On-The-Shelf, pre-configured chassis or custom specifications to suit your needs. Features and benefits of Roadster Shop SPEC chassis kits include: * Full-chassis performance at a smaller component price * Unparalleled quality * Add the strength of a full frame with no floor modifications on most applications * CNC laser-cut, TIG-welded, and contoured "Laser Rails" frame rails * No kinks, bends, or stressed areas that are prone to flex like mandrel-bent tubing * Stronger, lighter, and more precise * CNC-located factory mounts built into the frame for easy, vehicle specific installation * Frame rails accommodate mini-tubs and wider wheels * Aggressive ride heights for the modern pro-touring look * Choice of coilover or air suspension for many applications * Air suspension chassis will lay the rockers on the ground (varies with tire size) * Truck rear frame rail kick ups engineered for minimal bed modifications while allowing rockers to lie on the ground * Crossmembers and chassis bracing allow 3 in. exhaust * Adjustable, drop-out transmission mounts (tunnel mods may be necessary for larger T-56 and 4L80 transmissions) * Vehicle specific body (cab and bed on trucks), bumper, and core support mounts * Single-adjustable billet coilovers * Power rack and pinion steering * Easy-to-adjust upper A-arm eccentric mounts for fast and accurate alignments * Wilwood Pro Spindles * Parallel 4-bar rear suspension * Ford 9 in. housing with 31 spline axles * Optional mounts, coilovers, sway bars, brake packages, and rear-end gearing available on custom-order chassis * 5 x 4.75 wheel bolt pattern * Frames are shipped as bare steel
( 14 )
$20,375.99
—
$23,256.99
Dinan Carbon Fiber Strut Tower Braces
Dinan carbon fiber G8x strut tower braces provide additional rigidity and sharper handling to the chassis by reducing flex under hard cornering conditions. With more control, spirited driving becomes easier and infinitely more enjoyable. The lightweight braces are designed with maximum function in mind—and include linking structural elements that completely change the OEM 2-piece strut bar set into one blended system that offers additional strengthening against flex. Not one to take a back seat to functionality, aesthetics are also elevated beyond simple steel bars into striking carbon fiber (matte or gloss) with accents that tie in effortlessly into the highly geometric and angular factory engine bay for an OEM+ feel. The imposing carbon fiber braces can be installed in a matter of minutes and used in conjunction with either the stock or Dinan intake systems. While the braces were designed to specifically tie into the latter for a harmoniously balanced and unified appearance, they can also stand on their own and elicit nearly as equally an impressive visual. Product details:: * Improved chassis rigidity * Decreased flex during cornering * Lightweight: 5.6 lbs. lighter than stock (Dinan carbon fiber: 2.8 lbs. vs. OEM steel: 8.4 lbs.) * 2x2 twill carbon fiber with inset aluminum mounting points for increased strength and improved visual appeal * Designed to mesh seamlessly with the Dinan cold air intake, creating an aesthetically unified engine bay * Bolt-on installation using factory mounting hardware
Not Yet Reviewed
$1,126.95
OER Authorized Bolt-In IFS Conversion Kits
OER Authorized bolt-in IFS conversion kits are available for 1947-54 GM pickups with a V8 engine. The kits will improve your vehicle's ride, handling, and performance. These steel crossmember kits convert your antiquated stock front suspension and steering box to a more modern 1974-78 Mustang II or 1974-80 Pinto/Bobcat setup. Enjoy better handling with the addition of rack and pinion steering and twice the suspension travel when compared to stock. Combine this advancement in steering and suspension with the added benefit of modern braking power, and this setup becomes a no-brainer. The bolt-in kit is designed for use on 1947-54 Chevy 1/2 ton or light-duty 3/4 ton frames, and will drop the ride height approximately 2 1/2 to 3 in. using stock Mustang II front spindles. Lower control arm pivot tubes and gussets are not included in this kit. (A weld-in crossmember it is also available, if preferred.) Specs: * Bolt-in components. No welding required * Proven Mustang II geometry * Can use stock 1974-78 Mustang II or 1974-80 Pinto suspension components, except control arms. * Requires tubular control arms (strut-less style lowers) * Interlocking bolt-in boxing plates reinforce frame for strength * Requires power steering rack * Stock spindles will drop ride height 2-1/2" - 3 inches * Will work with small block or big block Chevy engines * Not for use with air-ride front ends Note: Additional items may be needed to complete installation, including but not limited to tubular control arms, spindles, coilover springs/shocks, rack and pinion steering, tie rods, calipers, rotors, inner tie-rod extensions. Important: Lower control arms need to be level with the ground (with all the weight on the vehicle) for correct steering geometry.
( 1 )
$404.99
Stifflers Suspension Strut Tower Braces
Stifflers Suspension strut tower braces add strength and stiffness to the front end by integrating the strut towers and firewall, greatly reducing flex and alignment changes caused by front suspension loads during cornering and braking. Reducing this flex provides increased steering response and stability, giving you improved overall handling and control. Features include: * Engineered to be used with most 3- or 4-bolt caster/camber plates * Clears most aftermarket cold-air and supercharger inlets * Manufactured of DOM tubing to maximize stiffness and strength while reducing weight * Triangulated mounting is far stiffer than standard 2-point braces * Design optimized using CAD/CAE software combined with real-world test data * TIG-welded for superior strength * Industrial-grade powdercoated for long life
( 1 )
$199.95
On Sale
Summit Racing™ Frame Brace Kits
Summit Racing™ frame brace kits are designed to easily install and strengthen the factory frame of your classic car or truck. The benefit of stiffening the frame is improved handling and a tight predictable feel. Reinforce your chassis and create a custom pro touring style, corner carving ride with these Summit Racing™ frame brace kits. *Constructed From DOM tubing *Computer Designed, Machined, and Bent *Welding Required for most kits *Adjustable transmission crossmember for Manuals or overdrives included *Generous openings for Dual Exhaust pipe routing *Exhaust hangers provided
( 69 )
$1,006.99
$906.29
Real Deal Steel Wider Wheel Well Tubs
Live large and make your mark on the boulevard! When you want to add the big spin to your 1955-57 Chevy, wider wheel well tubs are the first step to expanding your wheelbase. Real Deal Steel can help you broaden your wheel wells by 2 5/8 in. inboard, allowing the use of up to 13 in. wide tires (when used with a rear spring pocket kit, sold separately). If you want wider wheels and tires with the appearance of normal wheel wells, rely on Real Deal Steel--your "go to" guys for classic Chevy fabrication.
( 4 )
$575.99
Classic Performance Transmission Crossmembers
Install your tranny in the proper position using one of these Classic Performance transmission crossmembers. They're available for a variety of Ford and Chevy transmissions and are manufactured each vehicle's specifications for a precision fit. The durable steel crossmembers come with all necessary installation hardware. Keep your gear system secure and stable with Classic Performance transmission crossmembers.
( 167 )
$104.99
On Sale
Summit Racing™ Dual-Exhaust Transmission Crossmembers
Summit Racing™ steel transmission crossmembers allow you to run a true dual-exhaust system with most popular GM transmissions. They have a patented double-hump design, so you don't have to compromise ground clearance by running pipes under the crossmember, and they're a complete bolt-on deal—no custom fabricating or realignment is needed. The parts are made from 1/8 in. thick boxed tubing to handle the frame-twisting power of big blocks. Order the crossmember recommended for your vehicle and transmission application.
( 592 )
$75.99
—
$339.99
$68.39
—
$305.99
Shafer's Classic Reproductions Shock Bar Mounts
Shafer's Classic Reproductions offers shock bar mounts for a variety of 1955-57 Tri-Five vehicles. These steel replacement bars have a protective black finish. They fit full-size Chevrolet sedan, delivery, and SW models with a 35 5/8 in. wide frame.
( 1 )
$97.99
Chassis Engineering Transmission Crossmembers
Chassis Engineering transmission crossmembers are offered for a variety of applications. Whether you choose their bolt-in or weld-in styles, their selection of universal units will fit most standard or automatic transmissions, and they come available with five separate drops. Plus, they can be cut to the width you need to fit your frame. Chassis Engineering also offers a collection of car and transmission-specific crossmembers that will save you fabrication time. All are made from strong steel to provide the support that you need for your restoration project.
( 6 )
$165.00
—
$368.00
Global West Suspension Upper Trailing Arm Bracket Kits
Are you thinking about upgrading your suspension? These upper trailing arm bracket kits from Global West Suspension may just be the ticket! Add an additional upper arm to reduce the tendency of pulling the single upper arm off the frame. The higher horsepower engines and better tires make the addition of another upper arm for strength to the frame a necessity. Instructions are included on how to install these bracket kits.
( 2 )
$77.95
On Sale
Hurst Transmission Crossmembers
Hurst transmission crossmembers are designed and fabricated from thick steel plate and heavy-gauge steel tubing for a perfect fit and finish. These bolt-in units are much stronger than the factory stock crossmembers and help maintain the correct transmission and driveshaft angles. Precision-cut and fully MIG-welded, they are given a durable black powdercoat finish to last a lifetime and give you peace of mind knowing you are buying the best for your transmission conversion. Trust the company that originally started out making conversion mounts back in 1958, Hurst Performance.
( 7 )
$414.95
$234.47
—
$484.95
Instant Rebate
QA1 Strut Tower Braces
QA1 strut tower braces allow the substructure of the chassis to be fully triangulated. This amounts to more precise steering input, better alignment, and reduced flexing for the ultimate in cornering power and control. They're made from high-quality steel tubing and are black powdercoated for good looks and corrosion resistance.
Not Yet Reviewed
$188.96
BMR Strut Tower Braces
Most stock chassis flex dramatically, even with mild amounts of torque and horsepower. BMR suspension strut tower braces reduce chassis flex and increase handling and performance. They are manufactured from a mix of large diameter DOM steel tubing and thick laser-cut steel plate. Depending on the application, they are available in two-point and four-point designs that solidly link the front strut towers, adding strength to the entire front unibody and suspension. Most are available in black hammertone and red powdercoat finishes for long-lasting good looks. BMR strut tower braces are 100 percent bolt-in. This means they can be easily installed with simple hand tools, and no welding is required. Installation time is typically less than an hour. When performance is a must, rely on BMR Suspension!
( 168 )
$429.95
