Availability
Lares takes care to clean their remanufactured power steering cylinders thoroughly, and all exterior surfaces are reconditioned for a like-new appearance. Each component is inspected and replaced if it's not up to OE tolerances. All units receive new OE-equivalent chrome shafts, seals, and O-rings; then they're tested to ensure proper performance. Models are available for over a hundred vehicles from the 1950s, '60s, '70s, and '80s; order the replacement slave cylinder recommended for your application.
( 5 )
$199.99
You don't have to dip into the grocery money to get a pair of our Summit Racing™ rear fenderwells. Available in durable steel or lightweight aluminum, these fenderwells or wheel tubs come in multiple sizes to fit the largest of tires with plenty of clearance. They are formed with bead rolls for strength and a "hammer over edge" or "Pittsburgh seam" where the sides join the tub. Fenderwells come unassembled and ship flat. Once trimmed they are easily put together with a hammer and dolly by folding the edge over.
( 76 )
$127.99
—
$149.99
Rhodes Race Cars Sportsman Series diagonal links offer a very simple and cost effective method to center and stiffen your rear end. Diagonal links can be used on ladder bar or 4-link suspensions. Get one of these RRC diagonal link kits for your ride today. Kit comes complete with: * 36 in. x 1 in. diameter, .083 in. wall, 4130 chromoly tubing * 4130 threaded tube adapters * Mild steel clevis brackets * Mild steel rod ends * Grade 8 hardware Note: Kits require welding during installation.
( 4 )
$124.95
Bilstein B12 Special coil springs are designed to alter your vehicle's ride height for optimum performance. Bilstein utilizes various technologies to achieve the optimum ride height for each specific vehicle's requirement, providing the perfect combination of suspension dynamics, quality, and aesthetics. Order the springs recommended for your application.
( 10 )
$194.99
—
$246.00
Clearance
These Flaming River splined steering shafts are manufactured in your choice of steel alloy or stainless steel for strength and cosmetics. Steel alloy versions are available in natural or nickel plated finishes, while the stainlees steel versions are natural finish only. The shafts are manufactured in 2 in. increments, from 4 in. up to 36 in. The splines are 2 in. long on both ends, giving you room to trim them down if necessary.
( 11 )
$112.99
—
$140.99
Eliminate the hassle of fabricating a rear crossmember, and position your engine and transmission where you want them, with Trans-Dapt Performance universal transmission mounts. They'll support most standard and automatic transmissions with open channel frames and widths of 26 in. to 36 in. between the frame rails. With 0.114 in. wall thickness, they're available with no drop, 3 in., and 6 in. drops, either as kits with braces and mounting pads or as the crossmember alone.
( 48 )
$100.99
—
$235.99
Rhodes Race Cars Pro Series diagonal link kits offer a very simple, cost-effective method to center and stiffen your rear-end. Diagonal links can be used on a ladder bar or 4-link suspensions. Kit comes complete with: * 36 in. x 1 1/4 in. diameter .065 in. wall 4130 chromoly tubing * 4130 threaded tube adapters * 4130 chromoly clevis brackets * 4130 heavy-duty rod ends * Grade 8 hardware * Note: Kit does require welding during installation
Not Yet Reviewed
$149.95
Ideal for your steering system, these DD-type intermediate steering shafts from Flaming River can be cut to any length, eliminating the need to pre-measure. They're manufactured from pre-ground alloy steel for strength and cosmetics.
( 29 )
$101.99
—
$257.99
Designed to eliminate side-to-side housing movement, these Competition Engineering Ultra Magnum Series diagonal links are superior to the panhard bar for eliminating sway in ladder bar and 4-link suspensions. They include left and right-hand threaded rod ends to allow for on-car adjustments and can be shortened to fit a narrow chassis. Ultra Magnum Series weld-on diagonal link kits by Competition Engineering help keep your rear axle housing centered in the chassis for straight tracking. Product features: * Constructed from chromoly steel tubing * 1.000 in. diameter x 0.065 in. wall thickness x 36.000 in. overall length * Kit includes weld-in tube adapters, mounting brackets with 1/2 in. holes, plus all rod ends and mounting hardware
Not Yet Reviewed
$134.99
Designed to stabilize ladder bar and 4-link suspensions, these Competition Engineering diagonal links connect the front mounting bracket of a ladder or 4-link to the rear housing mounting bracket on the opposite side. They include left and right-hand threaded rod ends to allow for on-car adjustments. These links can be trimmed to fit narrow rear-ends, and come complete with all of the necessary brackets and hardware.
( 17 )
$129.99
—
$228.99
RESTOPARTS® Supplied steering shafts are made from polished stainless steel and allow you to customize your car with aftermarket columns and steering boxes. The shafts are available in several lengths so you can select exactly what you need for your project.
( 1 )
$103.99
Reduce body roll, understeer, and generally sloppy handling with Addco Performance anti-sway bar kits. The bar is made from high-carbon steel—and is hardened and stress-relieved to give your suspension superior support during sudden or sharp turns. Most kits include 12-gauge zinc chromate plated brackets with fully enclosed bushings, along with heat-treated end link bolts for added strength. Order the model designed for your vehicle application.
( 270 )
$233.50
UniSteer U-joints will provide that reliable connecting piece for your steering system. They're available manufactured from durable steel or stainless steel, so they can handle high-pressure steering applications. These U-joints are available for a wide variety of steering shafts and splines. Order the model with the shaft end configurations needed for your vehicle. UniSteer stands behind their products with a 2-year, Unlimited Mile Warranty.
( 58 )
$108.99
—
$211.99
Rock Jock Antirock sway bar kits provide the balanced performance of front and rear suspension for rugged off-road conditions. They give the driver increased traction by balancing and distributing the weight over all four tires. The bars are made of SAE 4130 heat-treated steel for ultimate strength. Kits are available with various components and in sizes for universal and vehicle-specific applications.
( 8 )
$240.00
Trans-Dapt Performance crossmembers eliminate the need to fabricate a rear crossmember. Their vehicle-specific transmission crossmembers are available as kits, with braces and mounting pads, or as the crossmember alone. Position your engine and transmission properly and exactly where you need them with quality, durable crossmembers from Trans-Dapt.
( 111 )
$119.99
Borgeson offers a variety of OEM-style rag joints in spline and DD sizes to fit most applications. The flexible couplings by Borgeson are only available in steel and should only be used when there is a perfect alignment between the connecting shaft and steering box. Order the model for your application.
( 102 )
$105.16
These Competition Engineering aluminum fenderwells are beaded at the seams to give them extra strength, and are made of 0.032 in. aluminum. These fenderwells allow for plenty of clearance, even on 15 and 16 in. Pro Stock tires.
Not Yet Reviewed
$250.99
Clearance
Flaming River stainless pinch bolt U-joints are manufactured with high-quality, CNC-machined 304 stainless steel yokes and crosses for strength and durability. Their high-strength shoulder bolt securely clamps the yoke to the shaft with a smooth, low-profile appearance for a clean installation. These steering U-joints are available in a variety of sizes and finishes.
( 10 )
$184.99
$111.50
—
$209.99
Clearance
Flaming River Billet-Joint steering universal joints are CNC-machined from aircraft-quality billet steel to precision tolerances. They feature a sealed, needle-bearing design that will outlast normal steering joints, while providing positive steering response with no backlash. The U-joints are available in a variety of styles, finishes, and shaft end configurations. Order the model suitable for your application.
( 163 )
$269.99
$101.50
—
$228.99
Clearance
Flaming River stainless steel U-joints are constructed from carefully selected 303 grade stainless for its strength, superior corrosion resistance, and shine. The steering components have such a precision-machined finish that looks great right out of the box—natural, polished, or satin. These U-joints are available in standard and double-joint styles, with dozens of shaft end configurations. Order the model suitable for your application.
( 38 )
$361.99
$134.99
—
$237.99
UniSteer steering shafts are built strong to "drive" performance! They offer several options of steel and stainless steel bars with or without splined ends to replace your existing weak shafts. Need direction? Let UniSteer guide you to driving precision with the strength and reliability of their steering shafts. UniSteer stands behind their products with a 2-year, Unlimited Mile Warranty.
( 8 )
$229.99
Raise your 4x4 without affecting drivetrain or steering system performance with these pitman arms from Skyjacker. These arms help to eliminate the bump-steer problems associated with newly lifted vehicles. They come available in standard or extreme drop versions, depending on the vehicle application and suspension lift height.
( 75 )
$104.94
—
$137.46
Koni oval track shocks have you covered. From the local dirt track, to the million-dollar winner at Eldora, to the IRL, racers have been running and winning on Koni shocks. These shocks have a patented mono-tube design, which allows for independent adjustments to the rebound and compression forces.
Not Yet Reviewed
$204.99
Skyjacker ADX 2.0 Adventure Series remote reservoir aluminum monotube shocks deliver modern technology in the design with an innovative off-road race-inspired full-displaced Custom Valve Tuned system. With this highest level of technology development, ADX 2.0 provides consistent dampening, high-end performance, cooler running, more control and improved driving comfort. ADX 2.0 shocks dampen out (control) the unwanted oscillation motion to improve handling and ride quality. They will optimize your suspension by keeping your tires in contact with the terrain. Engineered for higher speed applications, remote reservoir shocks still perform at crawl. Most drivers spend way more time on daily commutes than on the trails. The commutes are neither smooth surfaces or free of obstacles. Quick starts, up and down acceleration and hard stops are a daily routine. The external remote reservoir separates the nitrogen gas from the oil with an Internal Floating Piston (IFP). ADX 2.0 constant controlled resistance performance prevents lag (decline) or fade (failure). High-pressure nitrogen gas Custom Valve Tuning and IFP technology combine to create the fastest responding shock ever. The separate reservoir allows more room in the shock cylinder to increase the oil capacity. The large bore size design reacts quicker and creates the smoothest ride possible; while the PTFE-banded piston's smooth reaction delivers a superior ride and added stability on any terrain. Impact extruded CNC-machined T6061-T6 aluminum monotube dissipates heat and runs cooler versus traditional steel-bodied shocks. The overall weight of the aluminum body and aluminum remote reservoir setup is lighter too. Skyjacker ADX 2.0's superior construction will conquer off-road and on-road challenges through all manner of terrain, obstacles and extreme weather. Load up, set your waypoint where X marks the spot, and confidently conquer your next adventure to the far end of the trail and back again. These shocks are available for a variety of front and/or rear height applications, ranging from stock (zero lift) to 8.5 in. Order the models recommended for your Jeep, Ford, Ram, or other compatible vehicle. Product features and benefits: * Impact Extruded CNC Machined T6061-T6 Aluminum Monotube * Full-Displaced Valve System Inspired from Off-Road Racing * High Pressure Nitrogen Gas and IFP Technology Performance * Custom Valve Tuned, Vehicle Specific Consistent Dampening * Cooler Running, More Control and Improved Driving Comfort * Large 53.5mm Body OD with 46mm ID Bore Size * Quality Assured 2-Year Warranty * ADX 2.0 Smooth Reaction PTFE-Banded Piston * ADX 2.0 Custom Valve Tuned Controlled Resistance Performance * ADX 2.0 Has a Unique Clear Anodize Polished Aluminum Finish * ADX 2.0 Reacts Quicker to Improve Handling and Stability * ADX 2.0 Aluminum Monotube Provides Better Heat Dissipation
Not Yet Reviewed
$262.44
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
