Availability
Showing In Stock Items. Show All 13 Items.
Summit Racing™ steel transmission crossmembers allow you to run a true dual-exhaust system with most popular GM transmissions. They have a patented double-hump design, so you don't have to compromise ground clearance by running pipes under the crossmember, and they're a complete bolt-on deal—no custom fabricating or realignment is needed. The parts are made from 1/8 in. thick boxed tubing to handle the frame-twisting power of big blocks. Order the crossmember recommended for your vehicle and transmission application.
( 584 )
$275.99
—
$349.99
On Sale
Hooker LS engine swap transmission crossmembers are built to mount the transmission in place when switching to an LS engine. They are designed using CAD modeling/FEA analysis for optimal fitment, strength, weight, safety, and appearance. The crossmembers are manufactured from high-strength, low-alloy steel and then black powdercoated for maximum durability. They provide an engineered 3 to 3.5 degree engine/transmission inclination angle that is critical to obtaining suitable U-joint working angles. They are designed to be used in conjunction with Hooker LS engine swap brackets to provide a bolt-in installation of Hooker LS swap manifolds, headers, and exhaust systems for this application.
( 42 )
$359.95
—
$375.95
UMI Performance front reinforcement braces reduce squeaks and rattles common with the GM G-body platform. This welded steel tubing will stiffen the front frame horns and front crossmember area, and no drilling is required for installation. Grade 8 hardware is included to easily bolt the triangular brace onto your chassis. UMI front reinforcement braces are designed and manufactured with pride, and are available in your choice of powdercoat colors.
( 11 )
$294.21
—
$297.18
Strengthen your transmission support and reduce the weight of your vehicle with Summit Racing™ lightweight transmission crossmembers. Through advanced design and manufacturing, these crossmembers are stronger than standard boxed-steel transmission crossmembers, while weighing an average of 35-percent less. The crossmembers are a direct bolt-in and do not require any additional brackets or adapters to complete the installation. They also allow you to run a true dual-exhaust system with most popular GM transmissions and do not affect ground clearance. The welded design with clear powdercoat finish gives these lightweight crossmembers a fabricated look that's sure to complement your ride. Order the model recommended fit your application.
( 13 )
$329.99
Hotchkis Sport Suspension Convertible X Brace supports will add rigidity to your vehicle's chassis by replacing the factory frame brace. As an added benefit, they also allow for the use of larger-tube exhaust systems, which will often require the removal of the factory brace anyway. These fabrication-designed braces feature extra reinforcing gussets and a laser-cut HSS logo. Get your fabrication on with an assist from Hotchkis Sport Suspension Convertible X Brace supports!
( 16 )
$299.99
On Sale
Hooker Blackheart transmission crossmembers provide easy installation for a variety of engine and transmission swap combinations. Manufactured from steel with a black powdercoat, these crossmembers are designed to be used with Blackheart engine adapter plates for a trouble-free LS, LT, Hemi, Coyote, etc. engine swap. Order the model recommended for your vehicle. Blackheart crossmember features: * Comprehensively designed as an integral part of the complete Hooker swap system, providing maximum level of inter-component compatibility * Designed specifically for use with Hooker engine adapter plates * High-arch exhaust passages provide maximum available exhaust ground clearance * Design geometry replicates stock drivetrain height, inclination angle, and offset for optimized vehicle and component compatibility * High-strength/low alloy steel construction provides desirable balance of strength, stiffness, weight, and cost * Powdercoat finish provides attractive, corrosion-resistant appearance * Provide bolt-in compatibility with Hooker/Holley engine mounts, swap headers, exhaust systems, and oil pans * Hardware included
( 27 )
$399.95
—
$449.95
Trans-Dapt Performance crossmembers eliminate the need to fabricate a rear crossmember. Their vehicle-specific transmission crossmembers are available as kits, with braces and mounting pads, or as the crossmember alone. Position your engine and transmission properly and exactly where you need them with quality, durable crossmembers from Trans-Dapt.
( 111 )
$296.99
—
$311.99
American Powertrain X-Factor crossmembers offer half the weight of traditional crossmembers—with all of the strength. Designed to fit with most muscle car platforms and the latest transmissions, X-Factor aluminum crossmembers are 1,000 hp strong and feature a powdercoat finish for added durability. They're available for a variety of vehicle and transmission applications.
( 34 )
$289.95
—
$419.99
UMI Performance transmission crossmembers are designed for late model F-bodies. These crossmembers are built using 0.120 in. rectangular tubing, 0.188 in. mild steel mounting plates, and a 0.375 in. thick transmission mount. These crossmembers are powdercoated bright red or gloss black and include new mounting hardware.
( 5 )
$349.99
Detroit Speed weld-on subframe connectors join your front subframe and rear frame rails to increase your car's stiffness. These uniquely designed DSE connectors are fabricated from thick-wall rectangular steel tubing. They are bent and TIG-welded in a fixture for accuracy and repeatability. Unlike others, these DSE subframe connectors are barely visible from underneath the car, offering maximum ground clearance. Plus, they won't interfere with seat attachment hardware or the installation and removal of the rear leaf spring pocket. And, your molded factory carpet will still fit over the subframe connectors. Detroit Speed weld-on subframe connectors can be installed on convertibles and are supplied with templates, pictures, and detailed instructions for installation.
( 1 )
$324.95
Silver Sport transmission crossmembers are CAD-designed from heavy-duty formed and powdercoated steel. They offer strength and accuracy, two essentials of a crossmember. These SST vehicle-specific crossmembers are stiff and resistant to deflection, meeting or surpassing the original design, meaning they won't flex during hard launches or on rough roads. They are engineered to provide the proper driveline angle eliminating installation issues seen with adjustable crossmembers, as well as vibration issues and possible U-joint damage. Exhaust and ground clearance are also taken into consideration. Silver Sport transmission crossmembers locate the transmission at not only the proper height and angle, but makes sure it stays there, regardless of power, torque, or road conditions. Order the one for your specific vehicle.
( 4 )
$299.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
