Availability
UMI Performance boxed weld-in subframe connectors are necessary chassis upgrades when racing and hard driving habits are present. UMI Performance boxed weld-in subframe connectors greatly improve your car's handling ability, while reducing T-top squeaks, dash rattles, and quarter-panel flexing. Subframe connectors essentially tie the front and rear steel subframes together, resulting in a stiffened and strengthened chassis, allowing for better weight transfer and improved traction when launching. When strength is a concern, square tubing has greater torsion resistance over tubular designs. They will work with all aftermarket exhaust systems and will not affect ground clearance. Their weld-in style requires no bolts to tighten and offer less chance of flex when compared with bolt-in types.
( 23 )
$449.99
UMI Performance panhard bar relocation kits are designed to replace the upper rod support while relocating the lower panhard bar. By doing so, this offers enough room to run up to a 3 in. true dual exhaust system over the passenger side axle. UMI Performance panhard bar relocation kits include a new heavy-duty 1 1/4 in. upper support bar, CNC-machined mounting brackets, and all needed Grade 10.9 hardware. These relocation kits will work with the factory panhard bar and most aftermarket panhard bars.
( 9 )
$189.99
UMI Performance panhard bar lowering/leveling kits are designed to increase over-the-axle exhaust pipe clearance, as well as to lower and level the panhard bar. These competition-proven setups include weld-in reinforcement plates for the factory panhard bar mount, and adjustable struts to prevent lateral movement of the bracket system. Laser-cut adjustment slots permit lowering and leveling the panhard bar for roll center height and performance tuning. UMI Performance panhard bar lowering/leveling kits give much of the performance of a Watts Link with easier installation and adjustment. They're available in red or gloss black powdercoat finishes. Additional notes and features: * For use with factory axle only * Lowers rear roll center height 1 3/4 in. to 4 in. in 7/16 in. increments * 100 percent bolt-in for street use; welding required for competition use * Upper panhard bar brace built using 1.250 in. USA DOM tubing * CNC laser-cut bracketry throughout * Exclusive weld-in reinforcement plate (required for competition use) * Adjustable panhard bar height and leveling
( 1 )
$399.99
These UMI Performance tunnel brace torque arm mounts are designed to get the most out of your car. They are engineered to be stronger than the stock mount without adding excessive weight or bulk under your car. To make installation easy, UMI offers different offsets to clear the exhaust and specially designed them to bolt up to the factory location without needing to be welded in. These tunnel brace torque arm mounts are constructed from steel and are powdercoated to protect them from the harsh elements under your car. UMI Performances tunnel brace torque arm mounts are perfect to help you get your car off the line and down the track faster.
Not Yet Reviewed
$229.99
UMI Performance tunnel mounted torque arms are a proven fourth-generation setup designed to remove the front mounting point of the torque arm off of the transmission, protecting the tailshaft from damage. They also work great for transmission swaps when a clamshell torque arm is not feasible. These torque arms include instant center adjustment brackets and can be purchased with or without a front driveshaft loop. They bolt into existing floor pan holes with no drilling or welding required.
( 39 )
$569.99
—
$599.99
UMI Performance bolt-in Viking rear coilover kits allow full ride height, spring rate, and damping adjustability. The double shear upper mount is a direct bolt-in and holds a true 2.5 in. diameter coilover spring. The FEA designed lower bracket bolts in using the standard shock mounting hole as well as an additional reinforcement hole. Drilling one 3/8 in. hole per side is required to complete installation. The coilover kits utilize Viking shocks that are 19-way adjustable in both compression and rebound to ensure the perfect setting for every application. Viking shocks are fully rebuildable. The 2.5 in. diameter coilover springs are available in 14 in. long, 110 lb. spring rate for drag use; 14 in. long, 125 lb. spring rate for street use; and 12 in. long, 150 lb. spring rate for autocross and road race applications. The coilover kits have been tested with 1.5 in. diameter UMI trailing arms, as well as UMI's 22mm sway bar and 32mm drag anti-roll bar. Fitment with other brand sway bars and larger diameter control arms is not guaranteed. Please contact UMI for additional information regarding fitment. Key features: * Brackets manufactured entirely from 3/16 in. mild steel * Laser-cut brackets for consistency and a precise fit * TIG-welded for superior strength and clean looks * Powdercoated brackets for a long lasting finish * Viking double-adjustable shocks offer 19 compression and 19 rebound adjustments * 3 spring rate options, depending upon application * Bolt-in design * No welding required * Spacers included for use with control arm relocation brackets
( 10 )
$1,805.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
