Availability
Competition Engineering lower coilover shock-mount kits provide a solid, adjustable mounting point for racing coilover-type shocks. Machined spacers are included to adapt the components to various brands of shocks. These kits may be used with your own upper mount or with Competition Engineering's universal upper coilover mount kit, sold separately. Welding is required.
( 22 )
$114.99
Competition Engineering upper coilover shock mount kits work in conjunction with Competition Engineering's lower coilover shock mount kits and coil spring mount kits to provide a solid mounting point for the top of your shocks. The kits are designed to mount between the rear frame rails on any drag race, Pro Street, or street rod application. Their lightweight, tubular design makes them perfect for mounting shocks when "back-halving" a vehicle. Kits include one 40 in. long x 1.625 in. diameter tube, four shock mount tabs, four shock spacers for older-style coilover shocks, and all mounting hardware. Welding is required.
( 11 )
$68.99
Competition Engineering floating housing mounts are designed for ladder bar rear suspensions using leaf springs. By allowing the axle to pivot independently of the leaf springs, they eliminate the binding of the rear suspension due to the opposing travel arcs of the ladder bars and leaf springs as the axle moves up and down.
( 2 )
$276.99
These coilover shock mounting brackets from Competition Engineering make it easier for you to mount and install your coilover shocks. Features include: * Replacement brackets, also used in C2047 and C2051 coilover shock mount kits * Stamped from 3/16 in. cold rolled steel * 3/8 in. bracket mounting holes * 1/2 in. shock mounting holes
Not Yet Reviewed
$35.99
—
$36.99
These rugged universal lower shock mounts from Competition Engineering were created to relocate non-coilover shocks when the rear frame rails have been moved inboard. Features include: * Manufactured from .188 in. mild steel * Accept "eye" shock mount * Four per package * Fit all axle tube diameters * Welding required
( 4 )
$43.99
Competition Engineering replacement shock mounts offer a solid mounting point for your coilovers. Finished with a zinc and yellow chromate plating, these CEE shock mounts are corrosion-resistant.
Not Yet Reviewed
$56.99
Competition Engineering offers these coilover housing brackets to help make it easier for you to mount and install your shocks. Features include: * Replace weld-in axle brackets found in C2047 and C2051 lower coilover shock mount kits * 1 1/2 in. radius accepts 3 in. diameter axle tube * 3/8 in. shock bracket mounting holes * Stamped from 1/4 in. hot rolled steel
( 2 )
$33.99
Competition Engineering rear shock crossmembers provide a stronger mounting point for your shock absorbers on the inboard of the frame. Built to handle the stress of racing, they are made of 2 in. x 1 1/2 in. x .083 in. wall steel. As an added benefit, they will also strengthen the rear subframe.
( 9 )
$200.99
Competition Engineering's solid aluminum body mounts are designed as direct replacements for the factory subframe body bushings on GM unibody cars. They eliminate the chassis flex and twisting that are common when these cars are used in competition. The mounts are CNC-machined from 6061-T6 aluminum for a perfect fit, and black anodized to resist corrosion. Instructions are included.
( 14 )
$90.99
Competition Engineering mid-mount plate mounting kits may be used when installing your engine/transmission combination in different chassis where more than one mounting kit is required. Components in these kits are manufactured from mild steel and will require welding for the installation.
( 1 )
$23.99
Competition Engineering rear coilover mount kits without shocks and springs are designed specifically to improve traction and handling. The upper and lower shock mounts fit stock rear locations, and the bolt-in design requires no welding or fabricating. All hardware and spacers are included.
Not Yet Reviewed
$177.99
Competition Engineering's roll bar mounting plates are the same plates included in their 8-point roll bar, 10-point and 12-point roll cage kits. Based on customer requests, they are now available separately. The mounting plates are constructed of 10-gauge steel and offered in various quantities.
Not Yet Reviewed
$12.99
Competition Engineering mid-mount plates are designed to work with the aluminum front motor plates to further eliminate engine twist and prevent broken transmission cases in high-torque installations. Made from .188 in. thick 6061-T6 aluminum or .090 in. thick mild steel, they allow easy transmission swaps and help align the drivetrain for trouble-free operation. They include universal frame mounts and hardware.
( 24 )
$79.99
—
$274.99
Competition Engineering offers several different types of brackets and tabs to help make it easier for you to mount and install accessories to your chassis. These brackets and tabs enable you to replace bent and damaged brackets, or update your chassis setup.
( 21 )
$23.99
—
$60.99
Competition Engineering offers these Magnum series 4-link brackets to enable you to replace bent or damaged brackets when updating your rear-end housing. Designed for use on 3 in. diameter axle tubes, these brackets feature a radiused profile that simplifies welding and saves hours of fabrication time. The rugged steel construction eliminates bending in ultra high-horsepower cars, and the entire profile is stamped from hot rolled steel in one operation, to eliminate distortion and ensure exact dimensions.
Not Yet Reviewed
$54.99
Drive straighter off the starting line and improve 60 ft. times. Competition Engineering Magnum series anti-roll bars are designed to eliminate body roll during hard launches at the drag strip. They feature formed, heavy-gauge frame mounts, enabling you to install the torsion tube through the frame rails for increased strength. Billet aluminum arms are attached with special incorporated splines to prevent the arms from slipping on the torsion tube. Additional features include: * 4130 chromoly torsion tube * 2 adjustable splined billet aluminum arms * 2 mounting brackets * 2 adjustable links * 4 rod ends * 4 weld-in threaded adjusters * 2 flange mounted bearings * Installation hardware
( 15 )
$493.99
Competition Engineering Magnum 4-link kits offer the ultimate strength and adjustability for your high horsepower race car. Your big power racer needs more than directly-threaded links. These Magnum kits feature special threaded tube inserts that weld into thick-walled chromoly steel link tubing to handle shock loads without flexing. Plus, the 1/4 in. thick housing and frame brackets feature integral shock mounting holes to save you fabrication time on separate shock brackets along with additional mounting holes for wheelie bars, sway bars, and additional tube gusseting. Your high performance race car needs high performance traction devices; get connected with Competition Engineering Magnum 4-link kits. Features: * Chromoly steel tube links * Computer machined treaded tube ends * Thick steel brackets * Chromoly spherical rod ends * 21 in. mounting radius * Hardware and instructions
( 10 )
$698.99
These Competition Engineering ladder bar crossmembers are designed to be strong mounting points for the front rod ends. They will fit most chassis, while acting as a ladder bar mount and rear driveshaft loop.
( 14 )
$119.99
—
$242.99
Competition Engineering Standard Series 4-link kits provide rear suspensions that will give you the freedom to make incremental changes in your car's point of instant center (the adjustable point that determines weight transfer), for head-snapping launches. Designed for flexibility of adjustment to suit an individual car's characteristics, these kits allow custom installation to a particular application. Gain increased adjustability over ladder bar suspensions with Competition Engineering Standard 4-link rear suspensions. Standard kits include: * Direct threaded seamless steel tube links * Permanently mounted adjusting nuts for quick tuning * Stamped cold rolled steel brackets * Chromoly spherical rod ends * Grade 8 fasteners and jam nuts
( 22 )
$404.99
Competition Engineering designed these bars specifically for the street enthusiast. Using the same components as its Professional Wheel-E-Bars, Competition Engineering designed bolt-on mounting brackets to replace the harder-to-install weld-on brackets.
( 19 )
$641.99
These Competition Engineering universal frame rails provide the perfect foundation for just about any race suspension. Available for 4-link and ladder bar suspensions, these mandrel-bent rails provide solid mounting for your suspension and rear axle components, while allowing you to run a low ride height or taller race tires.
( 7 )
$417.99
—
$499.99
Designed to stabilize ladder bar and 4-link suspensions, these Competition Engineering diagonal links connect the front mounting bracket of a ladder or 4-link to the rear housing mounting bracket on the opposite side. They include left and right-hand threaded rod ends to allow for on-car adjustments. These links can be trimmed to fit narrow rear-ends, and come complete with all of the necessary brackets and hardware.
( 17 )
$129.99
—
$228.99
Designed to eliminate side-to-side movement of the rear axle housing, Competition Engineering panhard bars keep your tires from hitting the wheelwells and allow the car to run straight down the track. The 30 in. long bars can be trimmed to fit most applications and include gusseted mounting brackets, spherical rod ends, hardware, and instructions.
( 20 )
$167.99
These universal transmission crossmembers from Competition Engineering make transmission installation and removal quick and easy. They include a 1 5/8 in. x .134 in. wall tube, four flat mounting tabs, and four concave mounting tabs with all hardware. Welding is required.
( 16 )
$101.99
—
$119.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
