Availability
Perch your leaf springs on Allstar Performance leaf spring pads. They feature all-steel construction and fit 3 in. diameter rear-end housings. A good fit for your racer, Allstar leaf spring pads work with most leaf springs.
( 40 )
$10.49
These Allstar Performance standard series steel rod ends are designed to get your bars connected. They are manufactured from premium carbon steel and feature a 2-piece design for durability. The rod ends are available in different thread sizes and thread configurations to fit your suspension needs.
( 4 )
$4.99
—
$8.99
Allstar Performance chassis tie-down brackets can help you solve your tie-down and towing issues. The steel brackets weld to your chassis and provide a secure mounting location for your tie-down strap or winch cable.
( 5 )
$10.99
Allstar Performance brake line adapter mounting tabs will secure adapters and bulkhead fittings, or use the tabs for a variety of uses. These weld-on tabs are available with different hole sizes to secure the proper adapters for your application.
( 2 )
$5.99
Allstar Performance weld-on chassis tabs provide a secure mounting point to the chassis. These steel tabs are designed to support bodies, body sides, noses, and accessories—and have many other uses for car construction. They're available in different sizes, styles, thicknesses, and quantities.
( 4 )
$7.99
—
$9.99
Allstar Performance offers a wide selection of mild steel chassis tabs and brackets that are available for various diameters of round tubing, square tubing, and flat plates to suit your specific needs. Allstar Performance chassis tabs allow you to easily mount or install accessories on your chassis or suspension, while helping you save you time during car construction or repair.
( 85 )
$6.29
—
$10.99
Whether you're replacing old mounts or swapping out your engine, Allstar Performance has motor mounts that you can depend on for a secure installation. They are offered for a variety of applications in several styles, from replacements to conversions. These motor mounts are crafted from high-quality materials to ensure a perfect fit and great performance.
( 26 )
$9.99
—
$10.99
Allstar Performance chassis tube ends are designed to slide onto steel tubing and be welded in place. They feature fine threaded steel construction and are ideal for building custom-length suspension tubes. The tube ends are available for both right hand and left hand threads, and come in different diameters and thicknesses to fit specific applications.
( 14 )
$7.99
—
$9.49
Allstar Performance upper control arm shims are designed to easily help adjust caster and camber on your oval track racer. They are slotted for use with 1/2 in. diameter bolts and come available in individual or dual mount styles. The shims are made from durable steel and are offered in different thicknesses to help correct your caster/camber issues.
( 25 )
$7.99
—
$10.59
Allstar Performance bulkhead mounting tabs feature steel construction with a painted black finish. These sturdy one-piece mounts can be bolted to the chassis or rear-end to hold bulkhead fittings in place.
( 2 )
$4.99
Allstar Performance oil filter adapters are stock replacements designed to fit your engine block and accept an oil filter. These adapters are made with high-quality materials to create a durable product that you can depend on for years to come.
( 116 )
$7.99
Allstar Performance coilover brackets are offered in several styles, providing you with many mounting options. This selection of weld-on brackets is able to mount standard and coilover shocks with 1/2 in. I.D. inner bushing or 1/2 in. rod end to chassis, as well as having many other uses. Choose from right or left hand notched, long or short straight notched, and wide flat styles. Allstar also offers narrow radius mounts that weld parallel onto tubing. All of these coilover/shock/round tube mounts include 1/2 in. shock mounting hardware with bolt, spacer, and locknut.
( 24 )
$6.99
—
$8.99
Allstar Performance bolt-on track bar locator brackets are ideal bolt-on mounting points for rod ends commonly found on panhard bars, track bars, or rear axle housing track locators. They are for use with 1/2 in. diameter rod ends, and are available with a 5/8 in. or 3/4 in. bracket mounting hole.
( 4 )
$7.99
—
$8.29
Correct bump steer with spacers from Allstar Performance. Rock 'n roll is great, but not when it's your vehicle. Allstar aluminum spacers are available in several thicknesses to assist you in restoring the proper geometry and raising the roll center of your ride. So, if a bump in the road has you rocking in different directions, add bump steer spacers from Allstar, 'cause the only thing that should be rockin' 'n rollin' on your ride is the radio.
( 1 )
$3.69
—
$10.99
Allstar Performance rod end reducer spacers decrease the hole size for 1/2 in. hardware, while spacing the rod end away from the chassis brackets. Standard and flanged spacers that help to support the rod end are available. Order the length and material preferred for your application.
( 4 )
$5.99
—
$6.99
Allstar Performance high-misalignment rod end bushings are designed to increase the misalignment angle and reduce the hole size in your bearing. They will permit the rod end to swivel through a much wider arc to provide you with a more versatile mechanism. Additionally, you'll also receive a safer means of mounting spherical rod ends with a high angle of incidence. The bushings are made from the tough materials to last.
Not Yet Reviewed
$8.99
—
$10.99
Are you making brackets for your special project? Allstar Performance steel flat stock is perfect for fabricating mounting brackets or supports. Manufactured from standard grade steel, it has excellent welding characteristics and is easily cut and shaped.
( 2 )
$9.49
—
$10.99
Allstar Performance motor mount spacers are designed for use with pedestal-style engine mounts. These aluminum inserts are profiled for weight reduction—and are available in various lengths and diameters to accommodate your application needs. For all your racing, rodding and street performance equipment, remember the name: Allstar!
( 3 )
$8.59
—
$9.99
Allstar Performance coil spring shims are designed for use with their coil spring spacers, or wherever weight jack bolts aren't allowed, They raise your car's height for setup purposes. These shims are available in a choice of thicknesses.
( 3 )
$8.99
Finish off your frame, bumpers, or any tubing member with Allstar Performance steel end caps. They are available in round, square, and rectangular styles. Complete your tubing ends and prevent rust with Allstar steel end caps.
( 6 )
$7.99
—
$10.79
Allstar Performance gussets add support and strength to tubing joints when building roll cages or chassis mounts. Offered in solid (no holes), 1-hole, or 3-hole styles, they measure 1 7/8 in. tall x 1/8 in. thick. Order the style and quantity needed for your fabrication needs.
( 33 )
$7.99
Keep your spindles safely secured with Allstar Performance spindle lock nut kits. These kits include nut, washer, and a cotter pin for stock spindles.
( 3 )
$8.99
—
$9.49
Allstar Performance steering shaft rod end mounting tabs are weld-on components designed to cradle into round chassis tubing; their built-in gussets add strength and reduce flex. The tabs provide an excellent mounting point for Allstar's oversized 3/4 in. rod ends when building a custom steering shaft assembly.
Not Yet Reviewed
$6.79
Allstar Performance shock quick pins allow coilover shocks to be quickly serviced or changed. These steel pins are available with or without a built-in shoulder. The quick pins with a built-in shoulder will fit Allstar coilover brackets without using a separate bushing. The quick pins without a shoulder are generally used with non-bushing type brackets, but also fit Allstar brackets using a separate bushing. Allstar shock quick pins are 2 1/2 in. long and include a hair pin.
Not Yet Reviewed
$7.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
