Carbureted & Fuel Injected Engine Parts at Summit Racing

AED Annular Booster Adapter Tools

AED annular booster adapters are designed for use with your Holley booster installation tool. The adapters are available in two styles that will allow you to use your installation tool to properly fit annular and Braswell boosters with ease.

Not Yet Reviewed

$61.99

EMPI Pro-Sync Carburetor Synchronization Tools

EMPI Pro-Sync carburetor synchronization tools offer benefits like precise and accurate tuning for multi-carburetor setups, leading to smoother engine performance and improved fuel efficiency. They are constructed with high-quality materials for long-lasting use and feature a user-friendly design with a clear, numbered scale for easy, precise synchronization without restricting airflow, making them suitable for both professionals and DIY enthusiasts.

Not Yet Reviewed

$76.90

OTC Propane Enrichment Kits

Part of their automotive fuel service specialty line of products, OTC propane enrichment kits ensure a correct idle mixture and compliance with emission standards. They work on domestic and imported vehicles and use a standard 14 oz. propane cartridge.

Not Yet Reviewed

$166.99

JET Quadrajet M4 Series Adjustable-Part Throttle Kits

JET Quadrajet M4 series adjustable part throttle kits provide everything necessary for you to have easy access to the adjustable part throttle feature in your Rochester Quadrajet carburetor. They take approximately 30 minutes to install and allow you to adjust the part throttle setting on the primary metering rods. This can eliminate part throttle flat spots and off-the-line hesitation by simply turning a screw. The best part is, you don't have to take apart the carburetor every time you want to adjust the part throttle.

4.75 out of 5 stars ( 8 )

$34.99

Performance Tool Vacuum Cap Kits

Performance Tool vacuum cap kits provide a quick and sure way to seal vacuum connections. Use them on carburetors, manifolds, or where various vacuum tube caps are needed. Cap lines and hoses while testing emission control systems, diaphragm, and much more. Performance Tools vacuum caps are constructed from durable and heat-resistant Nitrile rubber.

Not Yet Reviewed

$14.99

S&G Tool Aid Fuel Injection Tester Adapters

S&G Tool Aid fuel injection test adapter fittings are made to work with their fuel pressure tester kits to diagnose low fuel pressure, a faulty regulator, leaking injectors, clogged or damaged fuel filters, or fuel leaks. When your vehicle is not running right, the correct diagnostic tool can help to quickly find the source of the problem and help you avoid the added time and expense of tracking down the problem. These fuel injection tester adapters by S&G Aid can help you diagnose issues before they become a problem.

5.0 out of 5 stars ( 1 )

$50.99

Performance Tool 200-Piece Spring Assortment Kits

Performance Tool spring assortment kits feature almost every type and size of spring that you can imagine. These kits contain 20 popular sizes of springs--8 sizes of compression springs and 12 sizes of extension springs. Plus, they are packaged in a sealable plastic case with identification chart for easy retrieval.

5.0 out of 5 stars ( 1 )

$12.99

K Tool 8-Qt. Utility Jugs

K Tool 8-qt. utility jugs are economical pitchers for transferring metered quantity of oil, fuel, antifreeze, or water. They feature translucent bodies for visibility to liquid level inside and are graduated in quarts and liters. They are great for use with large trucks needing up to 8 qts. of oil changed at a time, and include dust cover, flexible spout, and spout cap.

4.0 out of 5 stars ( 1 )

$25.99

K Tool 6-Quart Utility Jugs

K Tool 6-quart utility jugs are economical plastic cans for transferring metered quantity of media, such as oil, fuel, antifreeze, water, etc. The translucent body provides visibility to the liquid level inside the measures. Additional details: * Includes dust cover, flexible spout and spout cap * Graduated in quarts and litres * 8 1/4 in. spout

5.0 out of 5 stars ( 1 )

$21.99

K Tool Translucent Measuring Pitchers

Translucent measuring pitchers with flexible spouts by K Tool International make it easy to pour at different angles and see how much fluid remains inside them. Take some of the labor and guesswork out of your tasks with an assist from K Tool translucent measuring pitchers—available in 2 and 5-liter sizes.

Not Yet Reviewed

$18.99

K Tool Lever Style Oilers

K Tool offers lever-style oil cans with a flexible spout to lubricate hard-to-reach areas quickly and easily. The one-pint oilers feature an easy-to-use thumb lever.

Not Yet Reviewed

$13.99

Longacre Barrel Valve Setting Tool Components

Longacre barrel valve setting tool components are direct-replacement components for the Longacre products. Great for replacing worn out parts of your tools without having to purchase a complete new package.

Not Yet Reviewed

$44.99

Titan Tekz Vacuum Cap Kits

Titan vacuum cap kits can provide a sure way to seal vacuum line connections on your carburetors, manifolds, etc., when the vacuum lines have been removed. These vacuum caps are constructed from durable, heat-resistant Buna-N rubber. They come in a range of sizes in a convenient, resealable plastic case to keep the vacuum caps organized. Kits contain: * (20) 3/16 in. * (20) 5/32 in. * (20) 7/32 in. * (10) 1/4 in. * (5) 5/16 in. * (5) 3/8 in.

4.78 out of 5 stars ( 59 )

$12.99

—

$19.99

Milwaukee Brushless M18 Stick Transfer Pumps

The Milwaukee brushless M18 stick transfer pumps deliver superior filtration for the fastest handheld pumping in trenches, vaults, utility pole holes, and more. Powered by Milwaukee's M18 battery platform and brushless motor technology, the M18 stick water pumps transfer up to 25 gallons per minute and up to 1000 gallons on one M18 REDLITHIUM FORGE HD12.0 battery (sold separately). Equipped with HYDROPASS filter technology, the pump's 360 degree filter maximizes flow in heavy debris, minimizing downtime caused by clogging. With a 48 in. submersible reach, the stick transfer pumps provide the extension needed to reach water at the bottom of trenches and difficult-to-reach areas. Compatible with a 1 1/4 in. discharge hose or up to two 3/4 in. standard garden hoses using the included Y-adapter, transfer water farther to the ideal deposit location with a 17 ft. maximum head height. Product Highlights: * Brushless motor delivers more power and longer life * Simple setup: push-to-start * Easily transport across the jobsite * Drain up to 1000-gallon of water on (1) M18 REDLITHIUM FORGE HD12.0 battery pack (sold separately) * HYDROPASS filter shields against clogs—360-degree design maximizes flow in heavy debris * Pump up to 1000 gallons on (1) M18 REDLITHIUM FORGE 12.0 Battery (sold separately) * 17 ft. max head height * 1 1/4 in. NPT threaded outlet for max flowrate, threaded Y-adapter for 3/4 in. standard garden hose use * 48 in. submersible reach for easier inlet control * Threaded filter designed for easy removal

Not Yet Reviewed

$449.00

OTC Diesel Fuel Hydrometers

Quickly troubleshoot engine performance problems and measure #1 and #2 grade diesel fuel quality with OTC diesel fuel hydrometers. Their measurements are given as an American Petroleum Institute (API) gravity reading when testing diesel fuel composition and combustion characteristics. Fuel is drawn into the hydrometer tube which then floats the internal bulb float. The internal float contains a thermometer that is used to compensate the API reading for the highest accuracy. Additional features and specs: * Instructions included * Hydrometer scale: 30 to 110 * Correction scale: +2.5 to -5.0

Not Yet Reviewed

$159.99

JET IAFS-1700 Industrial Air Filtration Systems

The IAFS-1700 Industrial Air Filtration Systems by JET is all about one thing—workshop safety. Metalworking specific air filters attract oil mist, smoke and dust generated during the metal processing, which could affect the health of the machinist. JET's IAFS-1700 Industrial Air Filtration Systems offer significant benefits like improved air quality by capturing 99 percent of oil mist, smoke, and dust in metalworking shops, protecting workers from harmful airborne particles, and reducing respiratory issues. Key features include: * Constructed of metal for years of use * Helps to extended the service life of the air conditioning equipment in the shop * Filters dust, smoke and oil mist in a closed or air-conditioned workshop * Fully enclosed ball bearing motor with overload protection for long, dependable service * Adjustable Exhaust directs the air where you want it for optimal circulation * Pleated fiber air filter is 99 percent effective with filtering fumes, oil mist, and water vapor based on 8-to-10-micron size particles in the air * Two-Filter System with air diffuser disperses outgoing air into a broader pattern * Optional charcoal filters help eliminate odors

Not Yet Reviewed

$1,595.99

Titan Tekz 200-Piece Spring Assortment Kits

Outfit yourself with Titan's 200-piece spring assortment kits to save yourself time and money on unexpected trips to the auto parts shop. These kits contain various sized compression and extension springs, all safely stored in a resealable plastic storage case until you need them.

Not Yet Reviewed

$9.99

BD Diesel Killer Grid Heater Upgrade Kits

BD Diesel Killer grid heater upgrade kits are purpose-built to address a major flaw in the 6.7L Cummins engine--the electrical connection to the intake grid heater. When powering the grid heater, 200 amps pass through a small bolt and nut inside the intake and over time is known to deteriorate and eventually arc and break off. The nut drops into the engine, leading to extensive damage to the piston, head, and valves. BD's Killer kits upgrade that flawed electrical circuit by eliminating the problematic bolt and nut inside the intake while retaining stock functionality of the heater. The kits are cost-effective and easy to install. Additional features: * Allows for full heat output with the stock intake grid heater * Fully emissions compliant * No modifications or tuning required * Self-locking threads built into the lower busbar prevent backing out and compromising electrical connection * Kit includes replacement hardware and gaskets, along with special tools required for the job

4.8 out of 5 stars ( 5 )

$206.95

Holley Fuel Bowl Heli-Coil Installation Kits

Have you accidentally stripped the fuel bowl screw threads in your Holley carburetor? Don't replace it, Heli-Coil it! Holley fuel bowl Heli-Coil installation kits are designed specifically to repair damaged fuel bowl screw threads in Holley carbs. These kits include 10 Heli-Coils, a tap for cutting new threads, and an installation tool.

4.0 out of 5 stars ( 10 )

$145.95

Summit Racing™ Carburetor Jet Service Pack Pro Packs

We have put together all of the necessary components in these Summit Racing™ carburetor jet service pack Pro Packs to make routine jet changes on your carburetor. They include a jet kit, two of each sizes from 64-99, a carburetor dust cover, a drain cup for fuel, and a jet removal tool. Available for either 5 1/8 in. or 7 5/16 in. diameter carburetor air inlets, the Summit Racing™ carburetor jet service pack Pro Packs make a perfect addition to your toolbox.

5.0 out of 5 stars ( 1 )

$147.96

—

$151.96

Holley Sniper 2 EFI 650 HP Base Fuel Injection Systems

Holley Sniper 2 EFI Base Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * For applications using a vehicle specific EFI conversion tank and fuel pump, or already having a fuel system capable of the required 55-65 psi, these systems are offered without a pump and fuel lines * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected

4.19 out of 5 stars ( 31 )

$1,299.95

—

$1,549.95

Holley Sniper 2 EFI 650 HP Inline Pump Fuel Injection Systems

Holley Sniper 2 EFI Inline Pump Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Includes 20 feet of 3/8 in. vapor guard fuel hose, filters for before and after the pump, fittings and hardware, cushioned mounting brackets, and an external, inline pump * Can be used with 3/8 in. factory sending units or add a dedicated bulkhead fitting * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected

3.58 out of 5 stars ( 24 )

$1,699.95

—

$1,949.95

Holley Sniper 2 EFI 650 HP Inline Pump Fuel Injection Systems with Power Distribution Module

Holley Sniper 2 EFI Inline Pump Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. New for Sniper 2 is the Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12 V source is all that's required to power the PDM and your Sniper EFI. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Includes 20 feet of 3/8 in. vapor guard fuel hose, filters for before and after the pump, fittings and hardware, cushioned mounting brackets, and an external, inline pump * Can be used with 3/8 in. factory sending units or add a dedicated bulkhead fitting * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected

4.5 out of 5 stars ( 20 )

$1,799.95

—

$2,609.95

Holley Sniper 2 EFI 650 HP Base Fuel Injection Systems with Power Distribution Module

Holley Sniper 2 EFI Base Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. New for Sniper 2 is the Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12 V source is all that's required to power the PDM and your Sniper EFI. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * For applications using a vehicle specific EFI conversion tank and fuel pump, or already having a fuel system capable of the required 55-65 psi, these systems are offered without a pump and fuel lines * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected

4.3 out of 5 stars ( 10 )

$1,399.95

—

$2,199.95

Air/Fuel Delivery Parts for Carbureted & Fuel Injected Engines