Carbureted & Fuel Injected Engine Parts at Summit Racing

Vibrant Performance Air-to-Water Intercooler Cores

Vibrant Performance air-to-water intercooler cores offer superior cooling for high-performance vehicles, particularly those with high boost and heat demands. These intercoolers are compact, lightweight, and more efficient than traditional air-to-air cores due to water's superior cooling properties. They don't require ambient airflow, providing more flexible installation options, and are less affected by speed or temperature fluctuations. Ideal for forced induction applications, especially in drag racing, Vibrant Performance air-to-water intercooler cores feature durable bar and plate construction, optimized fins for maximum efficiency, and come in several sizes supporting 500 hp to 1,000 hp. Select the width and length needed for your vehicle.

Not Yet Reviewed

$219.99

—

$399.99

On Sale

Holley Sniper 2 EFI 650 HP Inline Pump Fuel Injection Systems with Power Distribution Module

Holley Sniper 2 EFI Inline Pump Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. New for Sniper 2 is the Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12 V source is all that's required to power the PDM and your Sniper EFI. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Includes 20 feet of 3/8 in. vapor guard fuel hose, filters for before and after the pump, fittings and hardware, cushioned mounting brackets, and an external, inline pump * Can be used with 3/8 in. factory sending units or add a dedicated bulkhead fitting * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected

4.33 out of 5 stars ( 21 )

$1,799.95

—

$2,609.95

$1,618.95

—

$2,347.95

On Sale

Holley Sniper 2 EFI 650 HP Base Fuel Injection Systems with Power Distribution Module

Holley Sniper 2 EFI Base Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. New for Sniper 2 is the Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12 V source is all that's required to power the PDM and your Sniper EFI. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * For applications using a vehicle specific EFI conversion tank and fuel pump, or already having a fuel system capable of the required 55-65 psi, these systems are offered without a pump and fuel lines * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected

4.3 out of 5 stars ( 10 )

$1,399.95

—

$2,199.95

$1,258.95

—

$1,978.95

VaraRam VR Air Grabber Ram Air Induction Systems

VaraRam VR Air Grabber Ram Air induction systems are designed to draw in air from the high-pressure zone between the upper core support and the underside of the hood. They feature a high mount location with water drains to ensure that mud or even water over 2 ft. deep will not create any issues. They are true forced induction systems that are intercooled and will help you gain up to 30 hp and 30 lb.-ft. of torque without any tuning. They are guaranteed to improve your quarter-mile times, as well as your 0-60 time. So, if you're looking for an extra boost in power and want to create a look that screams pure MOPAR power, these VaraRam VR Air Grabber Ram Air induction systems are just the thing for you!

4.15 out of 5 stars ( 13 )

$426.99

On Sale

Holley Sniper 2 EFI 650 HP Return-Type Fuel Injection Systems with Power Distribution Module

Holley Sniper 2 EFI Return-Type Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. New for Sniper 2 is the Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12 V source is all that's required to power the PDM and your Sniper EFI. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Includes 20 feet of 3/8 in. vapor guard fuel hose, return line, external regulator, filters before/after the pump, fittings/hardware, and a low profile return-type drop-in pump module(1.275-inches above the tank mounting surface) that is designed for universal installation into fuel tanks that range from 7 to 12 in. deep * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected

Not Yet Reviewed

$1,999.95

—

$2,249.95

$1,798.95

—

$2,023.95

Mishimoto Universal Single-Pass Air-to-Water Intercoolers

Keeping air intake temperatures low is the key to decreasing the impact of heat soak, reducing detonation, and producing consistent power output. As a result, intercooler systems have evolved substantially over the last decade, bringing liquid-to-air intercoolers into popularity. Mishimoto Universal single-pass air-to-water intercoolers are highly efficient designs that deliver effective cooling in compact packages. Each intercooler features 5mm thick, cast aluminum end tanks that are custom engineered for superb airflow, reducing overall pressure drop through the cooler. The tanks are professionally TIG welded to the cores, resulting in a pressure tolerance of up to 100 psi of boost, plus they feature unique CNC-machined, ribbed inlet and outlet coupler connections, ensuring maximum grip between coupler and piping. They are finish with a durable, micro wrinkle black powdercoat, and they incorporate -16 ORB coolant ports into the core and include 1/8 in. thick steel mounting brackets for an easier install. Providing a single-pass coolant flow configuration, Mishimoto universal intercoolers are available in multiple bar-and-plate core sizes with either same-side or opposite-site outlets. They support builds producing up to 1,500 hp.

Not Yet Reviewed

$590.95

—

$1,185.95

On Sale

Holley Sniper 2 EFI 650 HP Returnless Fuel Injection Systems with Power Distribution Module

Holley Sniper 2 EFI Returnless Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. New for Sniper 2 is the Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12 V source is all that's required to power the PDM and your Sniper EFI. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Includes 20 feet of 3/8 in. vapor guard fuel hose, filters before/after the pump, fittings/hardware, and a low profile returnless drop-in pump module(1.275-inches above the tank mounting surface) that is designed for universal installation into fuel tanks that range from 7 to 12 in. deep * Pre-set, internally regulated pump only requires a single feed line to the Sniper 2 unit * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected

4.0 out of 5 stars ( 2 )

$1,999.95

—

$2,249.95

$1,798.95

—

$2,023.95

Mishimoto Universal Dual-Pass Air-to-Water Intercoolers

Keeping air intake temperatures low is the key to decreasing the impact of heat soak, reducing detonation, and producing consistent power output. As a result, intercooler systems have evolved substantially over the last decade, bringing liquid-to-air intercoolers into popularity. Mishimoto Universal dual-pass air-to-water intercoolers are highly efficient designs that deliver effective cooling in compact packages. Each intercooler features 5mm thick, cast aluminum end tanks that are custom engineered for superb airflow, reducing overall pressure drop through the cooler. The tanks are professionally TIG welded to the cores, resulting in a pressure tolerance of up to 100 psi of boost, plus they feature unique CNC-machined, ribbed inlet and outlet coupler connections, ensuring maximum grip between coupler and piping. They are finish with a durable, micro wrinkle black powdercoat, and they incorporate ORB coolant ports into the core and include 1/8 in. thick steel mounting brackets for an easier install. Providing a dual-pass coolant flow configuration, Mishimoto universal intercoolers are available in multiple bar-and-plate core sizes with either same-side or opposite-site outlets. They support builds producing up to 1,500 hp.

3.0 out of 5 stars ( 2 )

$590.95

—

$1,185.95

On Sale

Earl's Performance Dominator In-Line Billet Fuel Pumps

Earl's Performance Dominator in-line billet fuel pumps are for those of you who are in need of a fuel pump that can support serious horsepower. Have a nitrous system, turbo or supercharger? No problem! These fuel pumps feature a twin-pump design that allows you to use one pump for cruising and both pumps when you activate your nitrous switch or start building boost. The second pump allows you to eliminate the unnecessary recirculating and heating of fuel that can lead to poor performance and hot fuel issues. Earl's Performance Dominator in-line billet fuel pumps also have an added benefit for hard core enthusiasts that run events like the Hot Rod Power Tour or the Baja 1000; that extra pump brings you peace of mind that you'll always finish what you've started. Features include: * Billet aluminum construction for durability and good looks * -10 AN O-ring inlet/outlet for high flow and superior sealing * Suitable for use with carbureted or EFI applications * May be fully submerged in-tank for custom applications, space savings, and reduced plumbing * Compatible with 12 V to 18.5 V systems at pressures up to 80 psi for street or race use * For hardcore race use, both pumps can be wired for full-time duty * Only 7.66 in. long x 5 in. wide x 2.5 in. tall for easy installation on frame rails or other tight areas * Patent pending dual-pump technology * Proven durability beyond 3,000 hours * Weighs only 5.1 lbs.--half a pound less than competitive 1000+ hp pumps * Not for use on aircraft of any type Note: These pumps are not designed to use standard conical seat-style unions in the inlets or outlets of the pumps. Use of this style fitting will block flow and WILL lead to poor performance and pump failure. The ONLY correct fitting to use is a contoured port fitting with an O-ring seal such as part # EAR-AT985010ERL.

5.0 out of 5 stars ( 1 )

$587.95

—

$716.95

Pacific Performance Engineering GM 3.0L Duramax Air-to-Water Intercooler Kits

Pacific Performance Engineering GM 3.0L Duramax air-to-water intercooler kits add style and performance to your Duramax. The intercooler is 77 percent less restrictive than the stock GM model, featuring flow-optimized, cast aluminum end tanks and a 2.4 times larger, less restrictive core structure. These features along with their all-aluminum bar and plate-style construction and superior fin layout, PPE intercoolers deliver increased cooling with a cooler and denser charge air that also helps reduce exhaust gas temperature (EGTs), increases fuel efficiency, and lowers the pressure drop. PPE's Duramax air-to-water intercooler kits are completed with a diecast support bracket, a billet aluminum turbo adapter that replaces the turbo resonator, and PPE Performance silicone couplers and coolant hoses. They are available in several finishes. Choose the preferred color for your Duramax.

Not Yet Reviewed

$1,214.99

Stillen Trupower Air Intake Kits

Stillen offers a wide range of performance parts for a variety of vehicle makes and models, including the Trupower air intake kits. The Trupower air intake kits are designed to increase the airflow coming into the engine while also dramatically reducing air intake temperatures. Trupower air intake systems by Stillen feature a replacement radiator shroud and intake duct that brings cold air from the front of the vehicle through the truck's core support and into a large airbox. This innovative design takes advantage of the vehicle's factory air intake opening while also adding more airflow through the true cold air intake port. In addition to a significant reduction in air temperature, the Trupower cold air intakes by Stillen increases horsepower and torque. Made from high-quality materials, each kit is designed to be easy to install, often without requiring any modifications. Some kits may include a block off plate, free-flow tube system and/or a straight or free-flow coupler, depending on your application needs. Order the kit designed for your application needs. Upgrading your vehicle's air intake can provide several benefits, including: *Achieves ambient air temperatures faster than any other intake on the market * Achieves ambient air temperatures 60 seconds faster than factory air intake * Achieved 20+ hp increase +20 Torque increase—horsepower will vary per vehicle * Easy installation- no cutting/modifications required * High-quality Stillen air filter

Not Yet Reviewed

$406.84

—

$448.04

On Sale

APR Intercooler Systems

APR intercooler systems result in repeatable performance—even in the most demanding of situations. These massive front-mounted upgrades dramatically reduce intake air temperature (IAT), minimize heat soak, and provide increased performance in easy-to-install, direct bolt-on designs. The superior effectiveness and performance of APR systems is focused around core selection, end tank design, and specific install location for each application. Balancing all the necessary characteristics, APR's engineers perfected units with exceptional cooling and lowered pressure loss across the core, while maintaining critical airflow to components behind the system—delivering maximum performance and far exceeding the capabilities of factory intercoolers. Features may include: * Aluminum construction * Large bar-and-plate design with densely packed staggered and louvered fins * Smooth cast aluminum end tanks engineered for low turbulence/restriction and maximum flow * Pressure tested to prevent power robbing boost leaks * Full directions and APR world-renowned customer support * Some systems may include CNC-bent and TIG-welded mounting brackets, high-quality multi-ply silicone inlet and outlet hoses, T-bolt clamps, and billet MAP sensor housings

Not Yet Reviewed

$1,024.95

$921.95

—

$2,254.95

Mishimoto L-Line Intercoolers

Big power requires big cooling, and Mishimoto's L-line intercoolers deliver! Their universal L-line features a massive 4 in. thick core that's capable of supporting up to 1,000 hp and one-piece, cast-aluminum end tanks that are far stronger than cut-and-weld tanks, making them capable of holding up to 60 psi of boost. Large 2.4 in. inlet and outlets ensure ample flow, while the 26.57 in. x 12.4 in. bar-and-plate core effectively transfers heat out of your charge air. Mishimoto L-line intercoolers are available in a durable sleek silver or stealth black powdercoated finish. Select the one you prefer. Additional features: * End tanks are precision TIG-welded to the core for durability and reliability, pass after pass * Three integrated mounting points with pre-threaded M6 holes make mounting easy * Center support mount ensures the intercooler is properly supported for aggressive driving * An integrated harness/sensor mount makes keeping your wires safe and tidy easy * Mishimoto Lifetime Warranty

Not Yet Reviewed

$699.95

APR DTR8868 Turbocharger Systems

APR DTR8868 turbocharger systems are direct replacements for the EA839 3.0L turbo engine. These upgrades include matching software for various vehicles and mods, providing up to 620 hp (571 AWHP) and 422 lbs.-ft. of torque (572 AWT), depending on vehicle platform and fueling, all while keeping emissions components unmodified. The software supports premium pump fuel grades, race fuel grades, and even ethanol on the S4, S5, and SQ5 platforms with fueling upgrades. For dedicated race cars, the turbocharger is designed with plenty of headroom to go even further on your own. The APR Stage 3 software is designed to avoid hard-spiking in the lower RPM band or running on the edge of what the factory rods and pistons should handle. Particular attention was paid toward component protections for exhaust gas temperature (EGT), back pressure safety (EMAP), turbocharger discharge temperatures, and fueling system capabilities. As rising exhaust gas temperatures require more fuel, the system will lower lambda to cool EGT without taxing the injection system with excessive on-times. Secondary protections will limit output for safety. The HPFP software helps increase headroom without over-driving the pressure to the injection system. The need for limiting power under extreme prolonged use (like tracking the vehicle), is greatly reduced, and the optional upgraded HPFP dramatically increases ethanol output. Note: Specific software is required to use this system, and an upgrade from lower stage systems is included for various vehicles. Software compatibility must be checked before purchase as the software installs to your vehicle's factory ECU. Currently, software can only be installed by an authorized APR dealer. Software is available in two formats: for use with the stock HPFP or for use with the APR HPFP. Additional APR DTR8868 turbocharger systems features, items, and specifications include: * Does not require a core and no additional downtime * Designed to bolt to factory location with factory-style connections * German dual ceramic ball bearing center section eliminates failure-prone journal bearing design * Smooth and reliable operation with a better transient response * Upgraded compressor cover with matching A/R * Larger aircraft-grade, 6061 billet aluminum 88mm compressor wheel * Turbine housing cast with high-temperature 310 stainless steel * Turbine A/R matched to nickel-based super-alloy K418 high-flow 54mm turbine wheel * Each rotating group is VSR (vibration sort rig) balanced for reliable operation * Includes complete turbocharger with a calibrated wastegate actuator and diverter valve * All necessary single-install hardware, gaskets, and clamps * Intake system adapter provides maximum flow-through as optional upgrade for factory intake * ECU software upgrade designed for factory engine and remains emissions-compliant * Supports 91, 93, 100, and 104 AKII, and E60-E85 in North America * Supports 95, 98, 104, 108 RON, and E60-E85 everywhere else * Integrated DV (Diverter Valve) port with OEM DV included

Not Yet Reviewed

$3,399.95

Wiring Specialties Pro Series LS1 Engine Wiring Harnesses

Wiring Specialties Pro Series LS1 Engine wiring harnesses offer the best in aesthetics, weight savings, and reliability. Designed specifically for your throttle cable driven LS1 equipped ride, these harnesses look as good as they function. Even better, the installation is simple and efficient! Check out the features and benefits, then completely replace your old harness and forget about electrical gremlins—thanks to Wiring Specialties Pro Series harnesses. Pro Series features and benefits: * Plug-and-play installation: The engine requires only 3 wires to be connected—starter signal, ignition signal, and fuel pump * No cores and additional wiring required * Integrated coil pack harnesses included * Standalone 5-circuit Bussmann fuse/relay block provided; no connections to OEM fuse boxes required * Circuits provided: Ignition, Fuel Pump, Fan1, Fan2 and A/C relay * Proper gauge wiring support for dual, 30 amp, PCM-controlled cooling fans * Point-to-point digital test on every wire * Constructed using OEM connectors and TXL Automotive wire with OEM colors * Made with high temp TXL wire (-40C to +125C operating temperature) with adhesive shrink tubing * ThermaShield 1,200F Aluminum/Fiberglass connector protection provided for knock sensors * Wrapped in lightweight nylon loom with -94C to +257C operating temperature * They have integrated transmission harnesses, and allow for more customization when selecting options like ECU, injector, and AFM connectors * They use high-temperature braided sleeving, and are built to exceed OEM specs for wire temperature rating, quality, and power/ground routing * The harnesses are designed from the ground-up for performance, optimization, and modularity, plus they're "tucked" for a clean professional appearance * Developed in-house on actual engines to ensure a perfect fit to the engine and chassis * Wiring Specialties use an OEM-style wiring construction process—they utilize hydraulic crimping machines that crimp wire and terminals with over 2000 lbs. of force * All harnesses undergo a wire-to-wire electronic test after assembly, to ensure that no wire pinout mistakes were made during assembly

5.0 out of 5 stars ( 1 )

$819.00

APR DTR6054 Turbocharger Systems

APR DTR6054 turbocharger systems are direct replacements for the EA888 Gen 3 engine. These upgrades include matching software for various vehicles and mods, providing up to 491 hp and 425 lbs.-ft. of torque, depending on vehicle platform and fueling, all while keeping emissions components unmodified. The software supports premium pump fuel grades, race fuel grades, and even ethanol on the Golf R, S3, and TT S platform with fueling upgrades. For dedicated race cars the turbocharger is designed with plenty of headroom to go even further on your own! Designed and developed from the ground up by APR, DTR6054 turbochargers do not require a core and there's no additional downtime. They are built using an aluminum anti-surge compressor cover with appropriate A/R matched to a larger aircraft-grade, 6061 billet aluminum 60mm compressor wheel, a turbine housing cast with high-temperature 310 stainless steel to take the heat and abuse seen on a road course, and a nickel-based superalloy K418 high-flow 54mm turbine wheel. A German dual ceramic ball bearing center section provides smooth and reliable operation with a better transient response, eliminating the factory failure-prone journal bearing design. Each kit includes the complete turbocharger with compressor inlet pipe, compressor outlet hose, T-bolt clamps, gaskets, O-rings, exhaust ring, exhaust V-band, exhaust manifold gasket, studs, bolts, and washers, oil and coolant line O-rings, and APR's ECU upgrades for select vehicles. The upgrade uses your factory electronic wastegate and diverter valve, and connects to your factory exhaust, intake, turbo outlet pipe, and oil and coolant lines. Tested at various road courses, APR's DTR6054 turbocharger systems do not spike torque hard or run on the edge of what the factory rods and pistons have been known to handle, making them as safe on the stock engine as possible for these power levels. Additional features: * Over 30 percent compressor flow compared to the factory turbocharger * Various software levels depending on fueling modifications, including stock fueling * Supports 91, 93, 100, and 104 AKI in all configurations * Supports E60-E85 with fueling upgrades (Golf R/S3/TT S platform only) * VSR balanced turbocharger center housing rotating assembly (CHRA) for reliable operation * Oversized cast turbo inlet pipe connects directly to factory or upgraded intake system * Machined turbocharger speed sensor port with included billet block-off plug * Silicone discharge hose with APR EZ-flow stepped lips included (no turbo muffler) * Integrated diverter valve (DV) port * Available in turbo kit only, turbo kit with low- and high-pressure fuel pump, or turbo kit with low- and high-pressure fuel pump and multi-port injection

Not Yet Reviewed

$2,151.95

—

$4,816.95

On Sale

Mishimoto Intercoolers

Maximize your ride's performance with a Mishimoto intercooler! These high performance intercoolers significantly lower air intake temperatures, while safely increasing horsepower for small and large turbo applications. Constructed from 6061 aluminum and precision TIG-welded, Mishimoto intercoolers feature sleek styling in a choice of colors for the ultimate in good looks. Whether you want to show it off or go with the popular sleeper look, Mishimoto makes an intercooler to give your engine--and your style--a boost!

5.0 out of 5 stars ( 2 )

$1,600.95

—

$1,954.95

On Sale

Mishimoto Intercooler and Pipe Kits

Mishimoto intercooler and pipe kits let your engine breathe in the coolest, densest air possible to help improve performance and overall efficiency of heat dissipation, along with being strong enough to handle just about anything. Mishimoto performance intercoolers offer increased core volume and fin surface area, which results in increased flow, reduced outlet temperatures, and the ability to generate gains in horsepower and torque. Intercoolers are available in black or silver. Pipes are available polished or with a black powdercoat. As with all their products, the Mishimoto intercooler and pipe kits are backed by their signature Mishimoto Lifetime Warranty.

Not Yet Reviewed

$1,600.95

Stillen Air Intake Kits

Upgrading your vehicle's restrictive stock air box with Stillen air intake kits will allow for increased airflow, which can help your engine breathe better and more efficiently. Air intake systems, also referred to as cold air intakes, are popular performance modifications that can be installed on many vehicle classes, ranging from high-performance sports cars to hard-working diesel trucks. These air intake kit components are designed to replace your vehicle's factory intake assembly with aftermarket intake tubes, air boxes, and filters to overcome restrictions in the intact tract, thus allowing more air to enter the cylinders. With an air intake kit by Stillen, you can expect to see a positive effect on horsepower, torque, and acceleration, as well as improved fuel economy—and that makes Stillen's air intake kits your best dollar-per-horsepower investment by far! Upgrading your vehicle's air intake can provide several benefits, including: * Improved fuel economy—cold air intake systems can improve your vehicle's air-to-fuel ratio, which can lead to better gas mileage. * Better acceleration, cold air intake systems can improve your vehicle's responsiveness and acceleration speed * Increased airflow—upgrading your air intake can allow for increased airflow, which can help your engine breathe better and more efficiently * Enhanced engine sound—increased airflow can create a sought-after engine roar * Better air filter life—aftermarket air intakes often come with washable, reusable air filters that can last longer than standard dry filters * Reduced engine wear—increased airflow can reduce wear on your engine * Engine longevity—upgrading your air intake system can enhance the longevity of your engine

Not Yet Reviewed

$607.69

—

$643.74

Injen Evolution Series Cold Air Intake Kits

Injen Evolution Series cold air intake kits will deliver impressive fuel economy, horsepower, and torque gains. They incorporate either a massive SuperNano-Web dry air filter or 8-layer oiled cotton gauze air filter--both fully serviceable--to keep clean air moving. These intakes feature sleek design lines for unmatched looks under your hood—and they drop into the original mounting points for a direct fit replacement. These systems come ready to install, complete with stainless steel hardware and automotive-grade hose couplers. Order the model designed for your vehicle application. Features: * Durable roto-molded polyethylene construction * Stainless steel band clamps with inner protective liner * Reinforced automotive-grade silicone couplers

4.61 out of 5 stars ( 18 )

$463.00

Edelbrock E-Force Camaro SS Stage 3 Pro-Tuner Supercharger Kits

Edelbrock E-Force Camaro SS Stage 3 pro-tuner supercharger kits include all of the essential components that a racer or tuner would need to build a custom supercharged racing setup. They offer the flexibility of choosing the right pulley, cold air intake, etc. for any custom supercharged installation. At the heart of these E-Force supercharger kits is the Eaton Gen VI 2300 TVS supercharger rotating assembly--a seamless design with minimal elements to eliminate problems and increase airflow. The air is kept cool with a high-capacity air-to-water intercooler and a low-temperature heat exchanger. Start your custom-built racer on a winning foundation that's made in America with these Edelbrock E-Force Camaro SS Stage 3 pro-tuner supercharger kits. These systems are for competition racing use only.

5.0 out of 5 stars ( 1 )

$7,508.95

Edelbrock E-Force Camaro SS Stage 1 Street Legal Supercharger Kits

Edelbrock E-Force Camaro SS Stage 1 street legal supercharger kits transform your Camaro into a force to be reckoned with! The kits utilize Eaton's Gen VI TVS supercharger rotors, featuring a four lobe design with a full 160 deg. of twist for maximum flow, minimum temperature rise, quiet operation, and the reliability for which Eaton is known. The Edelbrock E-Force Camaro SS street legal supercharger kits are a complete system that maximizes efficiency and performance by minimizing air restriction into, and out of, the supercharger. The supercharger housing itself is integrated into the intake manifold for a seamless design with minimal components, eliminating the possibility of vacuum leaks between gasket surfaces. The system also utilizes a front drive, front inlet configuration giving it the shortest, least restrictive inlet path on the market. The upper plenum area is enclosed by a top cover that has been designed to provide an appealing and distinctive under-hood appearance. This configuration allows for a compact package that can fit under the stock hood and cowl of the Camaro, without sacrificing runner length, or intercooler area. Edelbrock E-Force Camaro SS street legal supercharger kits provide neck snapping performance that is safe to operate on a completely stock engine. The kits are 50-state emission legal, and come with a 3-year 36,000 mile warranty (restrictions apply) so that there are no worries when installing it on a brand new car. Claim the streets with the added influence of these E-Force supercharger kits from Edelbrock.

4.67 out of 5 stars ( 3 )

$8,342.95

—

$9,286.95

Nitrous Outlet Dedicated Fuel Systems

Separate and specific, a setup just for your nitrous--dedicated fuel systems from Nitrous Outlet. A fuel enrichment system devoted to your nitrous removes the strain from your vehicle's stock system and gives you more control. These dedicated setups come with custom-built, lightweight, high-density plastic or heavy-duty, hand-welded aluminum fuel cells. A fuel pump, regulator, hose, fuel lines, and fittings complete the systems. Just about all of them are compatible with high or low fuel pressure by changing a spring inside of the fuel regulator, and they require no modifications to install. Create a distinct setup for your nitrous with Nitrous Outlet dedicated fuel systems.

4.0 out of 5 stars ( 1 )

$1,269.99

Air/Fuel Delivery Parts for Carbureted & Fuel Injected Engines