Availability
Showing In Stock Items. Show All 155 Items.
On Sale
With Holley Sniper throttle bodies, Holley engineers went back to the drawing board to build the ultimate air valve for your engine! They feature enlarged bore sizes, allowing for increased airflow to support your higher horsepower needs. A progressive throttle pulley enhances low-speed drivability, and a double return spring provides solid and secure throttle control feel. These units are maximized for your application, with a 4-bolt style mounting pattern; most models include bolts and gaskets. Order the throttle body designed for fitment with your year/make and engine family.
( 39 )
$349.95
$192.95
—
$320.95
DeatschWerks fuels your passion for performance with fuel injectors specifically designed and engineered for your Sport Compact, Modern Muscle, and European vehicles. DeatschWerks fuel injectors are manufactured to fit your OE harness, fuel rail, and manifold. Because they are application-specific, you'll spend less time installing and tuning, so you can spend more time enjoying the increased performance of your ride! They provide an excellent spray pattern and atomization for optimized idle and tuning. Each set is flow-matched both statically and dynamically, and flow-balanced to within one to two percent. A flow report is included with each set of DeatschWerks fuel injectors.
( 67 )
$459.00
—
$1,689.00
Lokar Hi-Tech throttle cables are available in stainless steel braided, black stainless steel braided, or black polyethylene housings. They're designed with a specially extruded liner for the extended life of the cable—not to be confused with ordinary braided brake hose. These cables are equipped with aluminum fittings and aluminum ferrules to eliminate fraying; and feature a "U-Cut-to-Fit" outer housing and stainless inner wire. The clevises are designed without cotter pins or set screws and adapt to factory and aftermarket pedals for an easy installation. Each cable comes with installation instructions. Order the universal-fit or application-specific model recommended for your vehicle and engine family.
( 659 )
$83.95
—
$126.95
Injector Dynamics ID1050x fuel injectors are a built-to-spec motorsport injector, offering optimization of critical operating parameters important to you, the motorsport tuner. Built on the evolution of the ID1000 and X Series, these injectors are a drastic improvement over previous series from Injector Dynamics. Order the set recommended for your vehicle. Features include: * Requires only 8 V for consistent operation at 8 bar * Corrosion resistance makes them compatible with all automotive fuels * Compact bodies allow fitment in over 200 applications * Improved internal flow path—without sacrificing low flow performance * Stronger magnetic circuit offers stable operation up to 10 bar * Replaceable inlet filter extends service life
( 8 )
$1,092.00
Nick Williams Performance cable-driven throttle bodies are precision CNC-machined from aluminum to provide easy tuning and idle calibration. They feature a larger opening (92mm or 102mm) to provide maximum airflow and improve throttle response. The throttle bodies are designed for use on FAST or other aftermarket intakes with 92mm openings.
( 16 )
$435.00
—
$459.00
Add Delphi fuel injection idle air control valves to control the airflow into your engine. Delphi OE replacement valves provide a superior fit and finish that result in an easier installation for you. Their idle air control valves meet federal emissions regulations, increase your fuel efficiency, and eliminate the potential for malfunctions. Get control over the amount of air allowed to flow into your engine, and your engine idle speed, in a variety of load conditions when you replace your air control valves with Delphi fuel injection idle air control valves.
( 34 )
$36.99
—
$109.99
PRW Q-Jet carburetors are manufactured with all new components. They are a significant upgrade to stock GM carburetors for most GM automotive applications. Every carburetor is designed with precision engineering and cutting-edge features and are equipped with PRW's industry first lean/rich adjustment allowing 15% +/- main circuit adjustment to allow for precise tuning with ease. They are available in 750 cfm for GM cars and trucks with engine sizes ranging from 283-350 cu. in. and 800 cfm for GM vehicles with engine sizes ranging from 350-455 cu. in.—both applications work well with a mild cam or headers for optimum street performance. Choose the PRW Q-Jet carburetor designed for your application needs. Key features: * All new—not rebuilt, or remanufactured * Available for 750 and 800 cfm applications * Industry first Lean/Rich adjustment allowing up to 15% +/- main circuit adjustment to allow for precise tuning with ease * Universal replacement for most GM automotive applications * Includes most required vacuum ports * Complete with a one-wire electric choke * Locally assembled and run-tested, with all gaskets, metering rods, jets and air bleeds made in the USA * Compatible with "C" and "U" style throttle linkages suitable for stock intake manifolds
Not Yet Reviewed
$699.89
For maximum power with exceptional drivability, transplant the power of fuel injection into your vehicle with Painless Performance fuel injection harnesses. All kits include straightforward instructions and TXL high-temperature, color-coded, and labeled wire for ease of installation. All fuel injection harnesses are 100 percent quality-tested on OmniScanners to ensure the viability of the circuits. Harnesses for both GM and Ford applications are available and they use genuine original equipment connectors for trouble-free installation and operation.
( 94 )
$569.99
—
$1,299.99
Earl's Performance LS steam vent kits eliminate trapped air and steam from your engine to prevent hot spots and overheating. They offer a selection of these LS power plumbing kits, with the appropriate braided stainless steel Speed Flex hose with hose ends that make installation easier and much more attractive than OEM hard lines. Plus, they provide more flexibility when you're using aftermarket intakes and other accessories on performance vehicles. The kits are available in front and 4-corner plumbing options, with adjustable anodized aluminum steam vent adapters and/or distribution blocks. Plumb your LS for performance with Earl's steam vent kits.
( 5 )
$299.95
—
$349.95
ICT fuel injector spacers adapt shorter LS injectors into taller LS intake manifolds and fuel rails. Manufactured from aerospace-grade billet aluminum, the spacers are available in multiple choices to add length to your fuel injectors. ICT Billet spacer sets also include O-rings. Choose the parts designed for your specific application.
( 27 )
$58.99
When you're serious about power for your LS or new LT1 engine, call in the AirForce! MSD Atomic AirForce intake manifolds have been designed using Computational Fluid Dynamic Modeling to create optimal plenum volume and efficient paths for improved airflow and distribution to stock and modified engines. Their unique bell-mouthed runner entrances maximize airflow and minimize shrouding--efficiently using the available plenum volume for an unobstructed flow path over opposing runners. The 2-piece molded polymer design resists heat soak, minimizes weight, and allows easy access to the runners for porting. MSD Atomic AirForce intake manifolds accept an OEM or 103mm throttle body, as well as stock, aftermarket, or Atomic LS EFI fuel rails. They are supplied with new gaskets and hardware for a direct bolt-on package. The 103mm throttle bore allows the use of large throttle bodies for greater airflow, and a direct-flow path runner design promotes maximum airflow.
( 19 )
$1,349.95
Standard Motor Products replacement idle air control valves help you get maximum fuel efficiency and power from your engine. A properly operating idle air control valve is an essential component to helping your vehicle run flawlessly. These valves are often referred to as idle air control or IAC valves (GM), automatic idle speed or AIS valves (DCX), and throttle air bypass solenoid or AIR valves (Ford). These idle air control valves are used on both throttle body and multi-port fuel injected engines to regulate idle speed. The IAC valves open a small bypass circuit that allows air to flow around the throttle. Increasing the volume of air that's allowed to bypass the throttle increases idle speed. The engine's computer controls the IAC valves, if idle speed is out of range, and commands the IAC valves to either increase or decrease the bypass airflow. Replace your vehicle's worn or malfunctioning idle air control valve with these reliable Standard Motor Products replacement IAC valves.
( 55 )
$85.99
Holley 450 lph fuel pump modules feature billet pump flanges that connect to either single or dual 450 lph pumps. They are compatible with gasoline and E85, and come pre-installed with new level and tank pressure sensors, as well as provisions to connect to the factory EVAP system for EPA compliance. Each Holley module also comes with all the parts and pieces necessary to complete the installation, including a 3 in. x 11 in. Hydramat filter that leverages surface tension to draw from nearly any area that has contact with fuel, eliminating starvation under hard acceleration or cornering. Holley 450 lph modules are all return style and all connectors used are DTM style. Choose the single or twin pump module for your car. Additional features and contents: * Anodized and laser-etched billet 6061 T-6 flange with 6AN ORB ports for feed, return, and vent * New gasket to complete installation * Wiring pigtails for the level sender and fuel pump * Fittings to connect to the factory 3/8 in. quick-connect feed and return lines * Flanges have been designed to be compatible with feed and return line sizes up to -8AN * Step-down butt connectors included to wire level sensor * Can be connected to factory EVAP system (with use of 12-874 and 935056ERL--sold separately)
( 2 )
$549.95
—
$723.95
BBK Power-Plus Series throttle bodies have you covered when it comes to increased airflow for your late model vehicle. These Power-Plus units are cast from high-quality 356 aluminum alloy and are machined on state-of-the-art CNC centers to ensure a perfect fit on your car or truck. Their features include double-sealed bearings, O-ringed throttle shafts, and precision die-stamped linkages—so you know you're getting the best quality throttle bodies at the best value possible.
( 395 )
$409.99
Holley 340 lph fuel pump modules feature billet pump flanges that connect to either single or dual 340 lph pumps. They are compatible with gasoline and E85, and come pre-installed with new level and tank pressure sensors, as well as provisions to connect to the factory EVAP system for EPA compliance. Each Holley module also comes with all the parts and pieces necessary to complete the installation, including a 3 in. x 11 in. Hydramat filter that leverages surface tension to draw from nearly any area that has contact with fuel, eliminating starvation under hard acceleration or cornering. Holley 340 lph modules are all return style and all connectors used are DTM style. Choose the single or twin pump module for your car. Additional features and contents: * Anodized and laser-etched billet 6061 T-6 flange with 6AN ORB ports for feed, return, and vent * New gasket to complete installation * Wiring pigtails for the level sender and fuel pump * Fittings to connect to the factory 3/8 in. quick-connect feed and return lines * Flanges have been designed to be compatible with feed and return line sizes up to -8AN * Step-down butt connectors included to wire level sensor * Can be connected to factory EVAP system (with use of 12-874 and 935056ERL--sold separately)
Not Yet Reviewed
$516.95
—
$649.95
Standard Motor Products fuel injectors help you attain maximum fuel efficiency and power from your engine. Properly operating injectors are essential components for enabling your vehicle to run flawlessly. These OEM stock replacements are available for hundreds of specific applications. Don't drive with faulty fuel delivery. Update worn or malfunctioning fuel injectors with reliable models from Standard Motor Products.
( 247 )
$79.99
FAST LSX high-flow billet fuel rails feature a larger internal diameter that is designed to dampen the pulses and provide increased fuel volume, ensuring that your fuel injectors never run dry. They are manufactured from high-strength billet aluminum and are red anodized for maximum durability. These fuel rails include aluminum black anodized -8 AN fittings and "super-seal" O-rings that are component-matched to maximize fuel distribution. Upgrade your fuel system while adding some horsepower with these FAST LSX high-flow billet fuel rails.
( 29 )
$264.95
—
$284.95
K&N washable lifetime performance air filters are designed to increase horsepower and acceleration while providing excellent filtration. K&N makes over 1,400 different replacement air filters for virtually every vehicle on the road. These filters are washable and reusable--and are custom-designed to fit into your existing factory air box. Their drop-in design means that adding performance is simple. With most vehicles, you simply remove the disposable air filter and replace it with one of these K&N air filters. Find the model designed for your specific vehicle application.
( 1153 )
$66.99
Build power by reducing air restriction and turbulence with SLP Performance LS1 air box lids. These composite lids feature a wedge-shaped design to increase and smooth out airflow as it enters your engine. They come with a steel clamp for easy hookup, and they mount in place of your stock lid.
( 67 )
$139.99
On Sale
Aeromotive Phantom direct-fit fuel pumps are drop-in systems engineered for your late model truck. They're available in five pump sizes, from single 340 lph to triple 450 lph. Designed to work with plastic fuel tanks, Phantom Series pumps cover a range of GM truck models spanning decades. The 1999-2004 models used a smaller factory fuel sending unit than the later 2005-17 models. The smaller size unit limits the pump configurations that this tank will accommodate. Aeromotive Phantom direct-fit fuel pump systems are also compatible with different tank depths.
( 2 )
$697.60
—
$731.00
$627.84
—
$657.90
Fel-Pro fuel injector O-ring sets help maintain performance vehicle. These replacement rings are engineered to offer a good, tight seal and prevent fuel leakage into hot engine compartments. Over time, your factory O-rings can become worn or cracked—leading to erratic fuel injection. Update the small accessories with the Fel-Pro set recommended for your vehicle and engine application.
( 9 )
$5.99
K&N 57 Series FIPK cold air intake kits are designed to eliminate air path restriction and deliver a massive amount of air into your engine, resulting in more power. These fuel injection performance kits are guaranteed to increase horsepower. They are engineered for specific vehicles to replace the OEM setup, including those with computer systems. The air filter element is washable and reusable, lasting up to 100,000 miles before service is required (driving conditions dependent). Where applicable, protective heat shields and hardware are included with installation designed to use factory holes and mounting points for easy installation. The air must flow—and it will when you order the K&N 57 Series FIPK cold air intake kit best suited for your application!
( 767 )
$472.99
Summit Bucks
When you're in need of an electric fuel pump, all you need to know is ACDelco. That's because ACDelco is an industry leader in the fuel pump market, delivering quickly available, quality components for most vehicles on the road. Simply put, you can rely on ACDelco's full line of electric fuel pumps. They have built their reputation on quality that you can believe in. ACDelco electric fuel pumps are manufactured in ISO-9001 and QS-9000 registered facilities with quality control systems that help ensure that their fuel pumps will consistently satisfy your requirements. Order the replacement model designed for your vehicle. All ACDelco electric fuel pumps are engineered to provide: * Outstanding fuel-delivery performance * Quick engine starts and a continuous fuel supply * Long-lasting durability * Easy installation and proper fit
( 121 )
$399.99
Lokar Midnight Series throttle cables have a PTFE inner liner and a black braided stainless steel jacket, along with aluminum clevis ends for smooth, no-bind cable operation. They can be easily adapted to fit most gas pedals and throttle assemblies. The cables are available in different lengths and cable end types; order the universal-fit or application-specific model recommended for your vehicle and engine family.
( 107 )
$83.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
