Availability
Showing In Stock Items. Show All 104 Items.
On Sale
ACCEL Performance fuel injectors provide precise control of fuel delivery and atomization for increased power, improved throttle response, and better fuel economy. They feature either a high or low-impedance design to function accurately with your vehicle's ECU. ACCEL fuel injectors come complete and ready for installation with precision-molded O-rings and fine-mesh fuel strainers. More product features and notes: * Utilize a new low-mass disc design that ensures a spray pattern for ultra-fine atomization and improved burn efficiency * Higher than stock flow rates may require reprogramming
( 219 )
$92.19
—
$649.95
Injector Dynamics ID1050x fuel injectors are a built-to-spec motorsport injector, offering optimization of critical operating parameters important to you, the motorsport tuner. Built on the evolution of the ID1000 and X Series, these injectors are a drastic improvement over previous series from Injector Dynamics. Order the set recommended for your vehicle. Features include: * Requires only 8 V for consistent operation at 8 bar * Corrosion resistance makes them compatible with all automotive fuels * Compact bodies allow fitment in over 200 applications * Improved internal flow path—without sacrificing low flow performance * Stronger magnetic circuit offers stable operation up to 10 bar * Replaceable inlet filter extends service life
( 8 )
$1,092.00
Trick Flow® TFX™ fuel injectors have so many features, it's no wonder that they are considered one of the best aftermarket injectors available! They atomize fuel better, resist clogging, are quieter, and require less energy to operate than other injectors. Low magnetic stainless steel bodies help prevent moisture contamination, and OEM-style clip grooves eliminate possible fuel leaks. Other features include electronically drilled and machined disc-type fuel control valves, improved nozzles and coil windings, and Viton® O-ring seals to prevent air leaks under extreme operating conditions. High-quality, 1/2 micron filter screens keep foreign debris and contaminants from entering the injectors to ensure proper performance and a long life cycle. TFX™ fuel injectors are 100 percent duty cycle tested to ensure reliability and performance. All flow values are at 3 bar (43.5 psi).
( 36 )
$76.99
—
$549.99
For maximum power with exceptional drivability, transplant the power of fuel injection into your vehicle with Painless Performance fuel injection harnesses. All kits include straightforward instructions and TXL high-temperature, color-coded, and labeled wire for ease of installation. All fuel injection harnesses are 100 percent quality-tested on OmniScanners to ensure the viability of the circuits. Harnesses for both GM and Ford applications are available and they use genuine original equipment connectors for trouble-free installation and operation.
( 94 )
$669.99
—
$744.99
PRW Q-Jet carburetors are manufactured with all new components. They are a significant upgrade to stock GM carburetors for most GM automotive applications. Every carburetor is designed with precision engineering and cutting-edge features and are equipped with PRW's industry first lean/rich adjustment allowing 15% +/- main circuit adjustment to allow for precise tuning with ease. They are available in 750 cfm for GM cars and trucks with engine sizes ranging from 283-350 cu. in. and 800 cfm for GM vehicles with engine sizes ranging from 350-455 cu. in.—both applications work well with a mild cam or headers for optimum street performance. Choose the PRW Q-Jet carburetor designed for your application needs. Key features: * All new—not rebuilt, or remanufactured * Available for 750 and 800 cfm applications * Industry first Lean/Rich adjustment allowing up to 15% +/- main circuit adjustment to allow for precise tuning with ease * Universal replacement for most GM automotive applications * Includes most required vacuum ports * Complete with a one-wire electric choke * Locally assembled and run-tested, with all gaskets, metering rods, jets and air bleeds made in the USA * Compatible with "C" and "U" style throttle linkages suitable for stock intake manifolds
Not Yet Reviewed
$699.89
K&N's universal performance air filters are designed and manufactured for a wide variety of applications, including racing vehicles, radio-controlled cars, generators, snowmobiles, tractors, and more. Many hundreds of models are are available, so regardless of the angle or offset diameter of your air intake, there is likely a K&N universal air filter for your equipment. All filters are constructed with ultra-strong, molded, pliable rubber flanges, which absorb vibration, allow for secure attachment, and can be stretched for up to 1/16 in. (1.5mm) to fit in-between sizes. K&N universal air filters are washable and reusable. Order the style and size that best suits your needs.
( 308 )
$68.99
Edelbrock Performer RPM Air-Gap LT1/LT4 intake manifolds utilize a proven short runner tunnel-ram style that provides that next level of performance you have been looking for. They are both direct stock replacements for OEM equipment with all required emissions features. The Edelbrock Performer RPM Air-Gap LT1/LT4 intake manifolds are manufactured from aluminum and feature a natural finish. Edelbrock's patended Air-Gap design delivers a cooler and denser air stream for maximum power output. They are designed to work with either stock, 52mm or 58mm Edelbrock throttle bodies, and will accept OEM fuel rails.
( 4 )
$822.95
These Trick Flow® LT1 air inlet elbows are designed to replace the ugly stock rubber air inlet elbow. They not only add a little bit of dress-up under the hood, but they also eliminate the factory resonator tube and include all provisions for using the factory sensors. These elbows are designed for use with SLP-type airfoils and are sized to work with stock air inlet systems. They will work with most brands of cold air kits, too.
( 45 )
$82.99
—
$103.99
On Sale
Agility Auto Parts offers a complete line of fuel module assemblies covering a wide variety of North American vehicle applications. Engineered and manufactured in a highly automated and dust-free environment, they meet or exceed all OEM specifications for fit, form, and function. Premium quality is ensured through stringent performance and reliability testing for pressure characteristics, flowrates, electrostatic discharge, and leaks. Agility Auto Parts fuel pump module assemblies include all the necessary components for a drop-in replacement right out of the box!
( 15 )
$199.99
—
$202.99
$179.99
—
$182.69
On Sale
Stealth 340 pumps are high-output, in-tank, electric fuel pumps for fuel injected and carbureted applications. At a volume rate of 340 liters per hour. These universal pumps bolt into many existing hanger assemblies, and are a direct fit upgrade for many OE applications. These pump will support up to: * 1000 HP (carbureted/naturally aspirated) * 850HP (carbureted/forced induction) * 850HP (EFI/naturally aspirated) * 700HP (EFI/forced induction) * 700HP on E85 (carbureted/naturally aspirated) * 595HP on E85 (carbureted/forced induction) * 595HP on E85 (EFI/naturally aspirated) * 490HP on E85 (EFI/forced induction)
( 17 )
$479.55
$406.76
Walbro electric in-tank fuel pumps are available in a variety of flow ratings, including pumps that flow significantly more fuel at higher pressure. The outside dimensions, however, of many pumps are compact enough to fit existing hanger assemblies, without modification. All pumping components have been validated to OEM specifications for use in E85/flex fuel applications. Most Walbro in-tank fuel pumps utilize a proven gerotor design. Some high-performance models, including those designed for engines with more than 750 hp, feature a dual-channel turbine design for maximum efficiency in high-pressure and high-temperature applications. The blades feed two high-pressure pumping channels, as opposed to a conventional single-stage pump that uses an impeller with a single row of blades at its outer edge. This innovative design results in improved hot fuel flow, as well as minimal noise and current use, resulting in efficiency that's higher than conventional pumps. Some pumps require modifications to system wiring, fuel lines, and the fuel module, and should be professionally installed. Installation kits including a fuel strainer, fuel hose, harness pigtail, clamps, and wire connectors are sold separately.
( 371 )
$57.99
K&N 57 Series FIPK cold air intake kits are designed to eliminate air path restriction and deliver a massive amount of air into your engine, resulting in more power. These fuel injection performance kits are guaranteed to increase horsepower. They are engineered for specific vehicles to replace the OEM setup, including those with computer systems. The air filter element is washable and reusable, lasting up to 100,000 miles before service is required (driving conditions dependent). Where applicable, protective heat shields and hardware are included with installation designed to use factory holes and mounting points for easy installation. The air must flow—and it will when you order the K&N 57 Series FIPK cold air intake kit best suited for your application!
( 767 )
$317.99
Standard Motor fuel pressure regulators ensure that your vehicle's fuel supply is precisely metered for optimum mileage and performance. Defective fuel pressure regulators most often develop excessive pressures that create an overly rich air/fuel mixture, robbing mileage and performance. Similarly, if the pressure regulator diaphragm leaks through its vacuum hose into the engine intake manifold, the fuel mixture will also become extremely rich. Don't take chances with your fuel supply—rely on Standard Motor Products for your vehicle's fuel system needs. Order the replacement regulator designed for your application.
( 47 )
$64.99
Fel-Pro fuel injector O-ring sets help maintain performance vehicle. These replacement rings are engineered to offer a good, tight seal and prevent fuel leakage into hot engine compartments. Over time, your factory O-rings can become worn or cracked—leading to erratic fuel injection. Update the small accessories with the Fel-Pro set recommended for your vehicle and engine application.
( 9 )
$5.99
BBK Power-Plus Series throttle bodies have you covered when it comes to increased airflow for your late model vehicle. These Power-Plus units are cast from high-quality 356 aluminum alloy and are machined on state-of-the-art CNC centers to ensure a perfect fit on your car or truck. Their features include double-sealed bearings, O-ringed throttle shafts, and precision die-stamped linkages—so you know you're getting the best quality throttle bodies at the best value possible.
( 395 )
$369.99
—
$409.99
Don't let your sluggish, stock fuel pump keep you from making real power, when one of these Granatelli in-tank pumps can help you get the power you want. They're a direct replacement--just drop one in place of your stock pump, and you can feed your fuel injection engine with up to 255 lph of fuel for serious power.
( 15 )
$166.58
—
$201.99
Chevrolet Performance offers these air inlet elbows for small block LT1 applications. These elbows are constructed from durable rubber and have blocked intake air silencer passage.
( 50 )
$108.12
Lokar Hi-Tech throttle cables are available in stainless steel braided, black stainless steel braided, or black polyethylene housings. They're designed with a specially extruded liner for the extended life of the cable—not to be confused with ordinary braided brake hose. These cables are equipped with aluminum fittings and aluminum ferrules to eliminate fraying; and feature a "U-Cut-to-Fit" outer housing and stainless inner wire. The clevises are designed without cotter pins or set screws and adapt to factory and aftermarket pedals for an easy installation. Each cable comes with installation instructions. Order the universal-fit or application-specific model recommended for your vehicle and engine family.
( 659 )
$71.95
—
$95.95
Holley TPI airfoils increase airflow capabilities by smoothing out the turbulent air as it enters the throttle body, improve throttle response, and increase cfm..
Not Yet Reviewed
$137.95
K&N inline fuel filters are designed for high-volume, low-pressure fuel systems. They're constructed of high-quality materials to withstand normal gasoline. Available with a sintered bronze, paper, stainless steel mesh, or polymer-coated paper element, K&N inline fuel filters screen out those harmful particles that can cause engine damage. For replacement or upgrade, order the model recommended for your vehicle application.
( 95 )
$19.99
To achieve the throttle return response needed with your high performance carburetor, order Dorman replacement throttle return springs. They're available in a variety of sizes, finishes, and quantities. Constructed from high-quality materials for long-lasting durability, Dorman throttle return springs will keep you in control of the accelerator!
( 31 )
$7.99
The best just got better! Injector Dynamics ID1750x fuel injectors are a built-to-spec motorsport injector, offering optimization of critical operating parameters important to you, the motorsport tuner. Built on the evolution of the ID1700 and X Series, these fuel injectors are a drastic improvement over previous series from Injector Dynamics. Compared to the 1700, the 1750x offers: higher dynamic flow rate with no increase in minimum fuel mass, better cylinder to cylinder balance at low pulse widths, and improved pressure sensitivity—all while retaining the same "compatible with everything but dirt" corrosion resistance that made the ID1700 famous. Plus, a unique magnetic circuit, resulting from a lengthy development program, makes the ID1750x immune to voltage and pressure sensitivity problems that plague other high impedance high flow injectors. Order the set of fuel injectors recommended for your vehicle. Key features and benefits include: * Compact body design allows fitment in a variety of applications * Higher dynamic flow rate with no decrease in minimum fuel mass * Better cylinder to cylinder balance at low pulse widths * Improved pressure sensitivity * Corrosion resistance makes these fuel injectors compatible with Methanol/Ethanol/MTBE/Nitromethane and all known Hydrocarbon fuels * Unique magnetic circuit makes the ID1750x immune to voltage and pressure sensitivity problems that plague other high impedance high flow injectors * Narrow spray pattern—minimal wall wetting promotes quick response and smooth running * Does not require extended linearity at low flow rates
Not Yet Reviewed
$2,436.00
Lokar Midnight Series throttle cables have a PTFE inner liner and a black braided stainless steel jacket, along with aluminum clevis ends for smooth, no-bind cable operation. They can be easily adapted to fit most gas pedals and throttle assemblies. The cables are available in different lengths and cable end types; order the universal-fit or application-specific model recommended for your vehicle and engine family.
( 107 )
$83.95
—
$95.95
Delphi fuel pump module assemblies are nickel plated with all-steel internal components. They feature internal guide rod springs and external rubber feet for enhanced stability and reduced noise from vibration. These fuel pumps have little flow or pressure variation in hot fuel situations. Delphi fuel pump modules are designed to be OE replacements.
( 251 )
$185.99
—
$188.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
