Availability
On Sale
Holley Street Performance mechanical fuel pumps are designed to work with stock or mildly modified engines. Ranging in performance styles of 80 to 225 gph, their body castings can be rotated 360 degrees to ease mounting in difficult places and they have large orifices for high flow rates. These pumps are not compatible with methanol or alcohol fuels and should not be used with fuel injection systems. A fuel pressure regulator is required for 130 gph versions.
( 352 )
$138.95
—
$230.95
$104.95
—
$150.95
On Sale
These CrossWind intake manifolds from Professional Products feature identical plenum and runner designs to the Typhoon. The main difference is that there is an open area under the plenum chamber. This feature is sometimes called an air gap design. The air flowing under the plenum provides a cooler charge for the incoming air with less heat transfer from the engine. This cooler air charge provides additional power.
( 43 )
$171.99
—
$339.99
$154.79
—
$305.99
On Sale
Weiand Action Plus intake manifolds are designed for use as stock replacements, with improved power and torque characteristics. They're 180 degree, dual plane types, with a carburetor flange that'll accept either stock or aftermarket performance carburetors. Their effective rpm range runs from idle to 6,000 rpm. With their high-flow runner design and ability to produce increased power with little modification, it's no wonder these manifolds are so popular.
( 65 )
$412.95
$268.95
On Sale
The Cyclones are Professional Products' lowest profile small block Chevy manifolds and are also the only ones that are street-legal on pollution-controlled vehicles. Cyclone manifolds are set up to accept a spread bore carb, but come with an adapter plate that permits the use of square bore carbs. To remain street-legal with a square bore carb, you must use one that is also approved as street-legal for your application. These Professional Products Cyclone manifolds are available in a variety of configurations to suit your needs.
( 28 )
$147.99
—
$260.99
$133.19
—
$234.89
On Sale
These Hurricane intake manifolds are one of Professional Products' very most popular race manifolds. If you are looking for the utmost in performance for the very least amount of cost, then these manifolds are for you! The base Hurricanes are terrific manifolds for budget engines such as claimer motors.
( 23 )
$203.99
—
$300.99
$183.59
—
$270.89
On Sale
A properly fabricated intake manifold can produce significant gains in your engine's performance. Add one of our Summit Racing™ fabricated intake manifolds to your engine combination to make more power! Each of these stock/OEM deck engine block style intake manifolds is manufactured to exacting standards utilizing the latest CNC machining and fabricating equipment. Simply find and order a perfect fit for your specific make and model vehicle.
( 28 )
$449.99
—
$469.99
$349.99
—
$369.99
On Sale
Summit Racing™ intake manifold and installation Pro Packs are now all in one part number. With Summit Racing™ intake manifold and installation Pro Packs, you can get your satin-finished, square-bore intake, plus all of the installation items that you need to finish the job, and save time and money! These Pro Packs also include Loctite black RTV sealant.
( 42 )
$509.85
$364.85
On Sale
These Professional Product Typhoon intake manifolds are powerful dual plane manifolds. For non-pollution controlled street machines, bracket racing, nitrous, or supercharged applications, these are among the best manifolds that you can use. They feature a square bore carburetor flange, nitrous bosses, 4-corner water ports, and dual distributor hold-downs.
( 13 )
$196.99
—
$349.99
$177.29
—
$314.99
On Sale
Aeromotive Gen II Stealth fuel tanks utilize patented and award-winning Phantom technology. This enables a quiet, high-flow EFI pump and baffle to maintain ample fuel supply around the inlet of the pump—which, in turn, ensures consistent fuel delivery and drivability even in low fuel conditions. The tanks feature outlet and return ports, along with electrical terminals positioned in the OEM location. This design enables flush installation to the vehicle floor and will not require strap modification or spacers. All Gen II Stealth tanks come out of the box completely assembled. The fuel pump, fuel level sending unit, and fuel/electrical bulkhead are pre-installed. As a true plug-and-play assembly, an Aeromotive Gen II Stealth tank will get you out of the garage and on the road in no time. Order the model recommended for fitment on your vehicle.
( 68 )
$780.85
—
$1,109.80
$702.76
—
$998.82
On Sale
You will not find an easier way to upgrade your fuel system than the Holley Sniper OE Style 350 LPH EFI Fuel Pump Modules. They are a direct replacement that fits your factory fuel tank, so you don't have to guess when it comes to something as important to your project as the fuel system. Because it was designed as a direct replacement for your factory pick-up and sending unit, there is no need to purchase a custom EFI fuel tank. You can even retain your factory fuel line. Simply connect the outlet of the pump module to the hard line on your vehicle with EFI-rated fuel hose and hose clamps available in the Earl's Vapor Guard Line. Features: * The in-tank fuel pump module is a high-pressure unit that flows 350 liters per hour (LPH) and is capable of supporting EFI (electronic fuel injection) engines producing up to 750 horsepower * Includes a pre-calibrated fuel-level sending unit designed to work with the factory fuel gauge for your application * Solves all the usual issues of converting from carburetor to EFI
( 28 )
$580.95
—
$632.95
$377.95
—
$411.95
On Sale
Our Summit Racing™ cast aluminum intakes are the perfect performance upgrades for your engine. The dual plane carbureted manifolds feature a runner design to deliver improved power. They're available in a variety of sizes, RPM ranges, and finishes. Order the model recommended for your vehicle application.
( 51 )
$328.99
$228.99
On Sale
Clearance
Holley Sniper carbureted fabricated intake manifolds are budget-friendly, sheet metal style intake manifolds. Each manifold is precision-fixtured and welded for a perfect fit and structural integrity. They are available for carbureted Chevy LS, Ford Coyote, small block Chevy, big block Chevy, and small block Ford engines. Features include: * Available for single or dual carburetor applications * 3mm (1/8 in.) thick T6061 sheet aluminum construction * More durable than competitive intakes * Bead-blasted silver or black anodized finishes * 100 percent TIG-welded * Custom Holley Sniper logo
( 37 )
$695.99
—
$912.95
$494.95
—
$694.79
On Sale
Holley Sniper offers OE-style 255 lph EFI fuel pump modules for a wide range of vehicles, including many Chevy, Pontiac, Buick, Oldsmobile, GMC, Ford, Mercury, Jeep, Dodge and Plymouth cars and trucks from the 1950s, '60s, '70s, and '80s. These in-tank modules are high-pressure units that flow 255 liters per hour (LPH) and are capable of supporting electronic fuel injection (EFI) engines producing up to 550 hp. A pre-calibrated fuel level sending unit designed to work with the factory fuel gauge for this application is included. Each module also features a HydraMat filter which has a unique internal reservoir that keeps fuel available at the pick-up and also provides protection from contaminates. Fuel pressure is internally regulated to 58 psi, eliminating the added expense and effort of purchasing and installing an external fuel pressure regulator; no separate return line is required because these modules return excess fuel right inside the tank! The Holley Sniper EFI fuel pump module was designed as a direct replacement for your factory pick-up and sending unit. There's no need to purchase a custom EFI fuel tank. You can even retain the factory fuel hard line—just connect the outlet of the pump module to the hard line on your vehicle with EFI-rated fuel hose and hose clamps available in the Earls Vapor Guard line.
( 10 )
$466.95
$303.95
On Sale
These intake manifold bushings are included with all Professional Products small block Chevy manifolds (except Vortec models) and permit the use of these manifolds on 1987-95 cylinder heads. Straight and angled versions are available .
( 4 )
$8.99
—
$15.99
$8.09
—
$14.39
On Sale
Holley 351W Ford Hi-Ram EFI intake manifolds are designed for your high performance engine. The modular design of these manifolds offers a runner length and a tapered cross-section layout that works for a wide range of engine configurations. The included fuel rails are machined for -8 AN O-ring fittings with passages large enough to accommodate high fuel flows and dampen pressure pulsations in the fuel system. Build maximum performance with 351W Hi-Ram EFI intake manifolds from Holley.
( 4 )
$1,349.95
$742.95
On Sale
Weiand Street Warrior intake manifolds are designed for use on stock or stroker combinations and more efficient cylinder heads. With new cam designs came the need for Street Warrior intake manifolds to support these combinations. Designed with Computational Fluid Dynamics software, Street Warrior intake manifolds rise to the challenge and deliver the performance to conquer the competition. Do you want maximum horsepower and torque from today's engines? Then choose Street Warrior intake manifolds.
( 140 )
$399.95
—
$424.95
$219.95
—
$276.95
On Sale
Revolutionize the way your engine performs with power-boosting Weiand Track Warrior intake manifolds! Designed for high performance engine applications, they are ideal for mean street machines as well as for competition super-class big block powerplants. They are computer engineered and dyno-proven to produce more horsepower and torque as a result of superior cylinder-to-cylinder distribution, giving the Track Warriors the edge over the competition and ensures safe, consistent air/fuel ratios for your engine. Plus, permanent mold castings provide weight savings of 10 to 20 percent over traditional sand cast pieces while maintaining inform wall thickness for porting. So, when you look for the pinnacle of performance, price and quality, just look to Weiand.
( 26 )
$549.95
$302.95
On Sale
Make Holley SBF Hi-Ram EFI intake manifold bases the foundation for your custom induction system. Their modular design allows them to accept a variety of carbureted and EFI tops. Plus, their runner length and tapered cross-section are designed to perform well for a wide range of engine configurations. Aggressive looks and bold styling make your bad intentions clear—whether you're drag racing, truck pulling, or making waves in your boat—when you start with the Holley Hi-Ram EFI intake manifold bases. SBF Hi-Ram EFI intake manifold base features and specs: * Manifold base only designed for 8.2 in. deck height * Cast aluminum construction * Available in natural cast aluminum (satin) or black powdercoat finish * EFI fuel rails are machined for -8 AN O-ring fittings, with passages large enough to accommodate high fuel flows and dampen pressure pulsations in the fuel system
( 1 )
$996.95
—
$1,049.95
$648.95
—
$682.95
On Sale
Holley introduces a new addition to their manifold line up—the SBF Hi-Ram EFI intake manifolds that come with an LS throttle body flange top (in either 95mm or 105mm throttle body sizes). Their runner length and tapered cross-section design will perform well for a wide range of engine configurations. The Holley engineering team also redesigned the water crossover passage to allow room for distributor phasing. With the aggressive, bold, race-bred styling, there's no doubt that these Hi-Ram EFI manifolds will make your bad intentions clear for drag racing, muscle car, marine, off-road, sandrails, pulling trucks, competition track, street rod applications, and more! Additional features and specs include: * Cast aluminum construction * Available in natural cast aluminum or black powdercoat finish * Manifold is designed for an 8.2 in. SBF deck height * EFI fuel rails are machined for -8 AN O-ring fittings, with passages large enough to accommodate high fuel flows and dampen pressure pulsations in the fuel system; they come standard with EFI Hi-Ram kits * Plenum top gasket type: 3/32 in. round O-ring cord * A low-profile distributor will be needed when using this manifold (sold separately)
( 5 )
$1,249.95
$812.95
On Sale
Summit Racing™ fuel pump and regulator Pro Packs consist of proven performance fuel pumps and regulators. Just select your brand, flow rate, and pressure requirements, and one part number gets you everything. We've even included a relay kit with the electric fuel pump combos. Economical and convenient, Pro Packs are available for virtually any application from the 1950s and up.
( 60 )
$280.90
$200.90
On Sale
These fuel pump block-off plates cover the opening left when you convert from a mechanical to an electric fuel pump. They're made from precision-cut steel that's highly polished and chrome plated. Gaskets are included.
( 28 )
$13.99
—
$18.86
$9.09
—
$12.26
On Sale
Holley SBF Hi-Ram EFI intake manifolds with side-mount tops are available for the 8.2 in. or 9.5 in. SBF Ford applications, and come with either a 95mm or 105mm Ford 5.0L throttle body flange side-mount top. The runner length and tapered cross-section design will perform well for a wide range of engine configurations. Holley's engineering team redesigned the water crossover passage to allow room for distributor phasing. The SBF Hi-Ram EFI intake manifolds have aggressive, bold, race-bred styling that's perfect for drag race, muscle car, off-road, pulling trucks, street rod applications, and more! Additional features and specs include: * Cast aluminum construction with satin silver finish * Designed for side-mounted throttle bodies (Ford 5.0L throttle body fitment) * EFI fuel rails are machined for -8 AN O-ring fittings, with passages large enough to accommodate high fuel flows and dampen pressure pulsations in the fuel system; they come standard with EFI Hi-Ram kits * Plenum top gasket type: 3/32 in. round O-ring cord * Allows room for designing boosted applications * A low-profile distributor will be needed when using this manifold
Not Yet Reviewed
$1,249.95
—
$1,299.95
$687.95
—
$844.95
On Sale
Agility Auto Parts offers a complete line of mechanical fuel pumps covering a wide variety of North American vehicle applications. They are engineered to meet or exceed all OEM specifications. Agility Auto Parts mechanical fuel pumps are drop-in replacements right out of the box with all the necessary components included.
( 21 )
$33.99
—
$58.99
$30.59
—
$53.09
On Sale
Aeromotive billet fuel rails are built for maximum fuel flow and ease of installation. They deliver optimal injector supply with minimal hydraulic fluctuation and will feed up to 3,000 hungry horses. The fuel rails feature ORB-08 ports with compact connections and positive leak-free sealing. Full-size ports at the end of the rails insure proper fuel flow. Additional inlet and outlet ports are provided where required for plumbing convenience. Steel mounting brackets are custom engineered for each application, combining a solid durable mounting platform that ensures a correct fit. Aeromotive fuel rails are CNC-machined and include a great looking anodized finish. Order the kit recommended for your vehicle.
( 14 )
$368.15
—
$380.35
$331.34
—
$342.32
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
