Availability
AEM Electronics water/methanol injection kits allow you to increase boost pressure and advance timing without having to run higher-octane fuel resulting in significant horsepower gains.
( 35 )
$499.95
—
$674.95
Snow Performance stage 2.5 forced induction progressive water/methanol injection kits provide increased performance with or without nitrous. Water methanol injection cools your incoming air charge and increases the total octane effect of pump gas. This allows you to run increased timing, which results in increased power and torque. When used with nitrous, the need for timing retard is greatly reduced or eliminated, and boosted applications especially benefit from reduced intake temperatures. The system includes everything needed for the installation. Order the model for your application.
( 2 )
$583.34
—
$937.51
Snow Performance Boost Cooler Stage-2.5 water/methanol injection systems suppress detonation so that more power-producing timing can be utilized. Water, with its high latent heat of vaporization, cools the intake charge and combustion. Methanol cools the charge and combustion, but also acts like an extremely high-octane fuel (some researchers claim as high as 120 octane) and adds more oxygen to combustion. Complete with custom water-methanol injection throttle body spacer plate, braided stainless line, and 4AN fittings offering un-surpassed reliability and ease of install. They're designed for use in naturally aspirated carbureted gasoline vehicles.
( 8 )
$536.36
—
$937.51
In gasoline engines, as with any intercooler, Stage-1 Boost Coolers suppress detonation, so more power-producing boost and timing can be utilized. Water, with its high latent heat of vaporization, cools the intake charge and combustion. Methanol cools the charge and combustion, but also acts like an extremely high-octane fuel (some researchers claim as high as 120 octane) and adds more oxygen to combustion. These systems contain everything needed to start making big hp! They're designed for use in gasoline (6-15 psig boost) supercharged/turbocharged vehicles. Systems include: * 300 psi high-volume pump * Adjustable boost pressure switch * 3 qt. reservoir * Two nozzles sized to your FWHP and boost levels * Bosch relay and all the electrical parts * Fittings, tubing, etc. for installation
( 15 )
$366.99
—
$726.57
AEM Electronics water-methanol injection solenoids eliminate any chance of water-methanol flow into the inlet when the WMI system is not engaged. This affordable water-methanol injection accessory features high-flow capability (3,600cc/min.)—and an impressively low current draw of only 0.75 amp that does not require the use of an additional relay. The valve body features include 1/8 NPT ports with included push-to-lock 1/4 in. hose fittings for easy connection, and EPDM seals that stand up to corrosion for years of reliable use. It's an inexpensive insurance policy to protect your high performance engine, regardless of the brand of water-methanol injection system you're using.
( 5 )
$124.95
AEM Electronics water/methanol injection nozzles are available in different jet sizes that allow you to select the appropriate jet for your power level. The nozzles are serviceable and can be disassembled for cleaning.
( 11 )
$93.69
—
$108.95
These Snow Performance replacement water injection pumps are designed to keep your water injection system operating safely and efficiently. Whether you're replacing a pump or you need to upgrade to a bigger one, the Snow Performance replacement water injection pumps provide reliable delivery for your water injection system.
( 4 )
$176.70
—
$204.09
These AEM Electronics water/methanol controllers feature a variable-flow progressive design that allows the user to determine the amount of water/methanol mixture to feed into the inlet stream from the fluid reservoir. They are designed to control a high-pressure, recirculation-style pump to deliver the mixture.
( 8 )
$206.95
Snow Performance VC-50 water/methanol injection controllers progressively command injection between two boost points--start and full. Adjustable between 1 to 50 psi, the controllers will begin injection at the starting point set and progressively increase injection volume with boost until it reaches the max injection point set. They come with heads-up boost gauge/water-methanol controller display. Manage the performance of your forced induction application with Snow Performance VC-50 water/methanol injection controllers.
( 2 )
$312.49
Snow Performance 300 UHO water methanol injection pumps offer unsurpassed pressure, technology, and reliability. All 300 Ultra-High Output psi pumps are individually tested to ensure quality and reliability. Features: * Dual EPDM seals offer greater psi ratings to be achieved--safer and longer * Proprietary internal wiring offers lower amperage draw than similar looking models * Built-in thermal breaker allows pump to run constantly without damaging pump internals
Not Yet Reviewed
$204.09
These Snow Performance water injection nozzles feature a unique design that provides the best possible atomization. They have integrated 100-micron filters, so they will keep larger particles out of the system. Available in a variety of flow rates, these Snow Performance water injection nozzles can support a wide range of engines from 150-1,500 hp.
( 10 )
$31.23
Snow Performance electronic solenoids are designed for use with the Snow carburetor plate nozzle adapter. They include a wiring harness, a plastic solenoid with 1/8 in. NPT female threaded attachments, and necessary fittings. The solenoids should be mounted after the throttle plate to keep from siphoning at idle, or if the nozzle must be mounted lower than the reservoir to keep from gravity feeding.
( 11 )
$73.00
AEM Electronics water/methanol injection system reservoirs are an important component to reduce engine knock and improve horsepower. They feature an integral fluid level sensor, so you never have to worry about running out when the boost is needed. Whether you want to upgrade the amount of fluid held in reserve, or just want to have a replacement on hand, AEM Electronics has you covered. These plastic reservoirs are available in multiple sizes.
( 3 )
$160.95
—
$217.95
Snow Performance offers direct port hardline upgrade kits to directly mount a nozzle into each cylinder—perfect for those running high-horsepower applications that depend on the water-methanol for tuning. Each kit comes with a distribution block, high-flow solenoid upgrade, and all plumbing to install a nozzle in each cylinder. Select the kit for your application needs.
Not Yet Reviewed
$309.24
—
$371.09
In diesel engines, the effect of Snow Performance Stage-1 diesel water/methanol injection systems is threefold. First, the intercooling effect provides more available air and all the benefits of a higher positive pressure ratio—more power-giving fuel can be utilized safely without high-combustion temperatures. Second—the combustion of water provides more power on the power stroke. And third—the Methanol acts as an additional fuel for more power. Select the Snow Performance boost cooler Stage-1 diesel water/methanol injection system designed for your application needs.
( 2 )
$416.66
—
$520.83
These reservoirs from Snow Performance are perfect for trunk or remote mounting. They come with rubber insulators, quick connect fittings, and extra tubing. They're a must for road racing applications or where high duty cycle/horsepower mandates higher volume on board.
( 4 )
$58.13
—
$364.50
AEM Electronics offers a cleaner flow of water/methanol for your engine with their injection filters. Their filters not only protect the internals of your engine, but the working components of the water/methanol pump as well! Your AEM injection kit is a great, low-cost way to increase the power of your gas or diesel engine, and using their water/methanol injection filters will help to increase pump life. Built from rugged polypropylene, these filters are easy to install, completely serviceable, and fit most systems on the market today. The stainless steel mesh strainer filters foreign particles as small as 40 microns without significant reduced flow. Feed your engine clean fuel with AEM Electronics water/methanol injection filters.
( 7 )
$49.95
Snow Performance dual nozzle upgrade kits allow you to add an additional nozzle to be mounted in any Snow Performance Boost Cooler kit. They include a tee splitter, a junction piece with quick-connect fittings, a nozzle holder, and a section of hose. The Snow Performance dual nozzle upgrade kits are perfect for applications that need more flow than one nozzle can provide, or to get even distribution for a dual plenum/throttle body/carburetor setup.
( 9 )
$41.66
—
$312.50
AEM water/methanol injection pumps help to increase the power of your engine. These recirculation-style pumps make great replacements for most water/methanol kits. Or, use them when creating your own special setup. AEM upgrades their pumps to ensure consistent fluid delivery for optimum performance with no erratic on/off pulsing, unlike older switched-styles. Their water/methanol injection pumps are designed with Santoprene diaphragms and EPDM seals to withstand the harshest of alcohol mixes. For better performance, consider an AEM water/methanol injection pump.
( 11 )
$199.95
—
$217.95
Snow Performance water methanol filters are designed to be placed on the inlet or vacuum side of the pump. The 100 micron replacement models help prevent debris from entering the pump without restricting the flow of methanol.
( 1 )
$61.84
Snow Performance Boost Cooler MPG-MAX diesel water/methanol injection systems feature special mapping and the most sophisticated 2-D digital controller available for 1 to 3 mpg increases. They use a new injection management controller that allows for a small, steady spray of water/methanol to be injected across the entire power curve. By improving combustion efficiency, they provide more power and use less diesel fuel. They also now feature a brighter LCD screen that displays boost, EGTs, and injection pump output. The Snow Performance Boost Cooler MPG-MAX diesel water/methanol injection systems include flow-control solenoids, a 300 psi pump, high-pressure tubing, a wiring harness, wire looms, and a optional large 7-gallon reservoir in some kits. Available for Dodge, Ford, or GM, the Snow Performance Boost Cooler MPG-MAX diesel water/methanol injection systems are proven to increase fuel economy, lower exhaust gas temperatures, and increase horsepower.
( 4 )
$1,041.68
These Snow Performance water injection system nozzle adapters are designed to help mount the nozzle in a plastic or rubber air inlet tube. They are manufactured from durable plastic and have a threaded hole to install the Snow Performance nozzle into.
( 11 )
$19.83
—
$123.69
This Snow Performance replacement water injection system tubing will gave you room to mount your reservoir wherever you need to. It is constructed from high-quality plastic and features a distinct red finish that is easy to find in any engine compartment.
( 3 )
$5.99
—
$20.82
Snow Performance Boost Cooler Stage-2 progressive water/methanol injection systems can unlock 50 to 70+ hp on your boosted vehicle, while decreasing your air temperatures by up to 100 degrees. You can increase your pump gas octane by 25 points and make more power, more efficiently, with a cooler running engine. These kits are compatible with all forced induction applications and feature a progressive controller with built-in MAP sensor that proportionally injects more or less water/methanol according to boost pressure. The controllers have adjustable start and stop points for engagement and delivery curves to match what the engine requires.
( 2 )
$625.00
—
$4,472.83
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
