Availability
Whether you’ve got a carbureted street engine, fuel-injected mod motor, or blown race mill, we’ve got the right intake manifold to feed the beast. From low-rise...
Whether you’ve got a carbureted street engine, fuel-injected mod motor, or blown race mill, we’ve got the right intake manifold to feed the beast. From low-rise dual plane intakes to single plane manifolds and tunnel rams, we carry carbureted intake manifolds from the best brands—Edelbrock, Weiand, Offenhauser, Brodix, Dart, and more. We’ve also got top-brand fuel-injected intake manifolds for today’s most popular engines, including GM LT, GM LS, Ford mod motors, Ford Coyote, Dodge Magnum, and more. Shop Summit Racing for complete intake manifolds, manifold bases, upper plenums, EGR components,...
Whether you’ve got a carbureted street engine, fuel-injected mod motor, or blown race mill, we’ve got the right intake manifold to feed the beast. From low-rise dual plane intakes to single plane manifolds and tunnel rams, we carry carbureted intake manifolds from the best brands—Edelbrock, Weiand, Offenhauser, Brodix, Dart, and more. We’ve also got top-brand fuel-injected intake manifolds for today’s most popular engines, including GM LT, GM LS, Ford mod motors, Ford Coyote, Dodge Magnum, and more. Shop Summit Racing for complete intake manifolds, manifold bases, upper plenums, EGR components, and other intake-related accessories.
On Sale
Dual-plane Edelbrock Performer EPS intake manifolds deliver dyno-proven horsepower gains from idle to 5,500 rpm, when used with Edelbrock's Performer Series square bore or Thunder Series AVS carburetors. Dyno tests showed an extra 5 hp and 9 lbs.-ft. over their own Performer manifolds. The secret is in the runner design, which is tuned to produce substantial torque increases in the 3,000 to 4,500 rpm range--with peak torque at 3,500 rpm. That's power where you need it the most!
( 308 )
$620.95
$195.95
—
$608.95
On Sale
Edelbrock Performer RPM Air-Gap intake manifolds incorporate race-winning technology that's been used on Victor Series competition intakes for years. The open air space from the Air-Gap design separates the runners from the heat of the lifter-valley cover. So, the air/fuel mixture stays cooler all the way to the heads, which produces a denser charge for more power. Runners are tuned to move the power band 1,000 rpm higher than Performer Air-Gap manifolds, from idle to 5,500 rpm up to 1,500 to 6,500 rpm.
( 430 )
$819.95
$356.95
—
$823.95
On Sale
Edelbrock Performer intake manifolds are low-rise, dual-plane designs with patented runner tuning and a 180 degree firing order that you won't find with the competition. This combination boosts torque over a wide rpm range, from idle to 5,500 rpm. These manifolds also deliver improved throttle response over stock intakes and are available in both EGR and non-EGR style.
( 557 )
$718.95
$185.36
—
$875.95
The engineers at FAST teamed up with the airflow specialists at RHS to develop a 3-piece, polymer intake manifold. They are constructed from a proprietary advanced polymer material that offers a host of benefits over aluminum aftermarket intakes, including lighter weight and improved strength and heat dissipating characteristics. While they feature a 102mm air inlet that is perfectly suited to the FAST Big Mouth 102mm throttle body, they can also be used with stock or aftermarket 90mm or 92mm throttle bodies. Other features include integrated nitrous bungs and perfect bolt-on fitment that allows for the use of factory accessories without modifications or clearance concerns. FAST LSXR intake manifolds' 3-piece modular design allows for easy disassembly and porting. This new design gives you the ability to remove individual runners from the manifold for modification.
( 26 )
$428.95
—
$1,424.95
Our Summit Racing™ cast aluminum intakes are the perfect performance upgrades for your engine. The dual plane carbureted manifolds feature a runner design to deliver improved power. They're available in a variety of sizes, RPM ranges, and finishes. Order the model recommended for your vehicle application.
( 44 )
$180.99
—
$650.99
On Sale
Stock intake manifolds in electronic fuel injection vehicles often fall short of lasting for the life of the vehicle. Being molded from polymers they tend to warp or crack and start leaking vacuum or coolant over the years. Summit Racing™ Premium EFI intakes are just what you need when it's time to replace your manifold as our design improvements address the failures that occur with existing manifolds for this application on the market today. These units are made to fit your specific vehicle and come complete with the necessary hardware for an easy OE type installation. Make this the last manifold you ever buy for your car or truck. Check out these features and benefits below: • Made in USA by OE Tier 1 Supplier • Aluminum crossover design improvement to mount direct to the cylinder head eliminating coolant exposure and eventual failure at the plastic interface of existing manifolds on the market. • High grade coolant resistant material used in coolant fitting and block out locations to coolant system. All coolant exposure areas are addressed with appropriate material. • Heat staked inserts for coil mounting. • Includes alternator brackets, throttle body adapter (application specific), thermostat, gaskets, and mounting hardware.
( 31 )
$379.99
$109.99
—
$341.99
Summit Racing™ induction kit Pro Packs start with the Edelbrock EPS Performer intake manifold, which builds horsepower and torque from idle to 5,500 rpm. Summit Racing™ induction kits also include an Edelbrock 600 cfm Performer carburetor and a 14 in. chrome steel Summit Racing™ air cleaner, plus zinc plated Summit Racing™ carb studs, a Summit Racing™ stainless steel intake bolt kit, and a Fel-Pro Printoseal intake manifold gasket set. These kits are compatible with both the 260 hp and 290 hp versions of this engine and are designed for smooth street performance.
( 23 )
$715.86
Edelbrock Performer EPS intake manifold and carburetor kits contain all of the necessary pieces to upgrade your induction system. They include an Edelbrock Performer EPS aluminum intake manifold with either a natural aluminum finish or an EnduraShine finish, an intake gasket set, intake manifold bolts, a carburetor stud kit, and a Performer Series 600 cfm electric choke carburetor. The EnduraShine finish is a bright silver chrome finish that resists discoloration from heat and features a clearcoated top coat to enhance abrasion and chemical resistance. The Edelbrock Performer EPS intake uses an all-new runner design tuned to produce substantial torque increases. Ready for a change? Try Edelbrock Performer EPS intake manifold and carburetor kits for your musclecar, hot rod, truck, or ordinary street vehicle.
( 60 )
$790.95
Add some muscle! Offenhauser C Series intake manifolds fill the gap between stock and competition setups for 4 and 6-cylinder cars and pickups. They improve torque in the mid and upper ranges, with power bands that span from 2,500 rpm to more than 7,000 rpm. Smaller applications use Holley 5200 or Weber 32/36 Series 2-barrel carbs. Holley 2300s can be used for competition with an adapter. Six-cylinder, 4-barrel versions can use square bore Holley or Carter carbs. Emission-control provisions can be blocked off for competition.
( 22 )
$427.99
—
$628.99
Chevrolet Performance EFI intake manifolds are ideal stock replacements for your worn or faulty original. These multi-port injection models are made from factory-style materials to OE specifications—for a proper fit and flawless performance. Order the manifold recommended for your vehicle application.
Not Yet Reviewed
$147.99
—
$1,592.97
On Sale
Holley EFI LS Hi-Ram intake manifolds are designed for your high performance race engine. Big cube and high-rev applications without height limitations are the intent for these manifolds. The modular design of these Holley Hi-Ram intake manifolds offers a runner length and as-cast tapered cross-section design that works for a wide range of engine configurations. The included fuel rails are machined for -8 AN O-ring fittings with passages large enough to accommodate high fuel flows and dampen pressure pulsations in the fuel system. Build maximum performance with EFI LS Hi-Ram intake manifolds from Holley.
( 38 )
$999.95
—
$1,169.95
$755.95
—
$1,051.95
On Sale
Edelbrock Performer RPM intake manifolds have a high-rise, dual-plane design. They produce incredible top-end horsepower, while retaining good throttle response. Performer RPMs have larger plenums and runners to match the free-flowing exhaust, high-lift cams, and other modifications of a high-output engine. They're intended for high performance street or competition engines that run from 1,500 to 6,500 rpm.
( 215 )
$1,019.95
$253.76
—
$917.96
Edelbrock Performer intake manifold and carburetor kits contain all of the necessary pieces to upgrade your induction system. They include an Edelbrock Performer aluminum intake manifold, an intake gasket set, intake manifold bolts, a carburetor stud kit—and an Edelbrock Performer Series 600 cfm electric choke; a Thunder AVS 650 cfm electric choke; or a Thunder AVS 800 cfm electric choke (depending on your engine C.I.D.). The EnduraShine bright silver chrome finish is optional and resists discoloration from heat; it features a top clearcoat to enhance abrasion and chemical resistance. Edelbrock Performer intakes are designed to deliver improved throttle response over stock intakes. Are you ready for a change? Edelbrock Performer intake manifold and carburetor kits are available for small block and big block muscle car, hot rod, truck, and street vehicle applications.
( 31 )
$924.95
—
$1,011.95
Banks Power Monster-Ram intake elbows may look unassuming, but these simple, direct-replacement elbows provide instant power, performance, and acceleration gains! Designed to improve airflow from the intercooler, these air inlets raise boost without increasing backpressure at the turbine. Banks used the latest in electronic computational fluid-dynamic technology to create a larger, less restrictive design than the stock intake. Simply put, Monster-Ram intake elbows allow for a greater flow of oxygen-rich, cooler, denser air into your cylinders for instant torque, responsiveness, and greater fuel economy! Banks Monster-Ram intake elbows provide up to six ports for water, methanol, propane, and nitrous injection, or pressure/temperature sensors—the possibilities are unmatched for performance expandability. Tested on the flow bench, and dyno and real-world proven, Banks Monster-Ram intake elbows unleash the free-breathing power that your engine is craving! Order the model designed for your vehicle application.
( 20 )
$998.00
Go retro with Edelbrock Performer RPM LS1 intake manifold kits. These kits give you the opportunity to use a carburetor on your originally computer-controlled engines. Performer RPM LS1 kits include a wiring harness and an MSD ignition controller (compatible with 24x and 58x) which works with OE sensors to fire the coil-on-plug ignition system and offers a choice of six timing curves. A special throttle and transmission bracket that works with 700R-4, 200R-4 and Turbo 350 transmissions is included. Make your LS1 engine an easy retro-fit into any muscle car, street rod or marine application with American-made Edelbrock Performer RPM LS1 intake manifold kits.
( 10 )
$978.95
Ford Performance Parts has done it again. You can now put the same intake manifold on your Mustang that comes as original equipment on Mustang Boss 302, 302S and 302R race cars. Ford Performance Parts Boss 302 5.0L modular intake manifolds feature a huge plenum, coupled with short, straight runners, for increased airflow at upper rpm levels without sacrificing low-end torque. They have gone through the rigorous testing to become assembly line parts, so a direct fit and long service life are assured. Ford Performance Parts Boss 302 5.0L modular intake manifolds are manufactured from high-quality, composite materials and provide you with excellent high-rpm flow characteristics. Additional features include: * Includes unique Ford Racing intake badging *O-ring intake gaskets included * Boss 302 Intake Manifold Installation Kit, Part No. M-9444-M50B, is recommended and includes the necessary production components to complete the installation (minor wiring harness modifications required) * Calibration is required to prevent engine damage! * Calibration not included * Boss 302 air inlet tube does not have provisions for aspirator tube hook up common to automatic transmission equipped 2011-14 Mustang GTs
( 19 )
$264.99
On Sale
These Performer RPM FE intake manifolds from Edelbrock are designed for high-performance street Ford FE V8s with standard low/medium-rise or Edelbrock Performer RPM FE heads. Their dual-plane constant cross-sectional area design builds low and mid-range acceleration, while optimized runner paths make top-end horsepower. These manifolds have a provision for adding the PCV or breather flange at the rear, and no exhaust crossover passage.
( 37 )
$700.95
—
$823.95
$630.86
—
$741.56
Breath new life into your 305/350 V8! Edelbrock Performer T.B.I. intake manifolds are stock replacement parts for 305/350 V8s with a factory TBI. They accept all OE equipment and small-bore throttle body injectors.
( 32 )
$494.95
On Sale
Low-profile, single-plane Edelbrock Victor Jr. intake manifolds are very versatile and can be used for drag racing and Oval Track competition, as well as for street applications. Power bands range from 3,500 to 7,000 rpm, on up to 4,500 to 8,000 rpm. There are applications for small block and big block engines, as well as for 2-barrel and 4-barrel carburetors. Some manifolds accept standard restrictor plates and carb adapters.
( 60 )
$600.95
$398.66
—
$762.95
Offenhauser Dual Port intake manifolds feature completely separate runner systems for the primaries and secondaries for more power across the rpm range. At low-load, the primaries feed the air/fuel charge through the smaller bottom passages at near sonic speed, improving power and efficiency. When the secondaries open, their charge goes through the bigger, cooler upper passages. Then, in turn, it is rammed into the cylinders when it encounters the high-velocity mix from the primaries. The results are better fuel economy and a 15-30 percent power increase across the entire rpm range. These manifolds are available in a variety of styles and options for many year/make and engine applications.
( 44 )
$395.99
—
$1,041.99
FAST LSXRT intake manifolds are designed specifically for GM truck engines (4.8L, 5.3L, and 6.0L) and LS1, LS2, and LS6 race applications where hood clearance is not a concern. FAST LSXRT 102mm intake manifolds follow the path chartered by the original FAST LSX Gen III intakes by featuring a modular design that allows for easy porting and disassembly and a runner design that yields an incredible 25 peak horsepower gain over the stock intake (on a stock 6.0L engine with a Big Mouth 102mm throttle body). Similar to the LSXR 102mm intake manifold for cars, the LSXRT features the ability to remove individual runners for modification. LSXRT's are constructed from a proprietary precision injection molded polymer which offers many benefits, including lighter weight, greater strength and lower heat soak propensity. While they feature a 102mm air inlet that was designed for the FAST Big Mouth 102mm throttle body, they can also be used with stock 90mm or aftermarket 92mm throttle bodies (78mm three-bolt throttle bodies require an adapter). Other features include integrated nitrous bungs and precise bolt-on fit that permits the use of factory accessories and OEM fuel/emission connections without adjustments or clearance issues. Some GM truck models may require the FAST 92mm or 102mm throttle body.
( 10 )
$1,208.95
—
$1,397.95
AFR Eliminator Series intake manifolds are the perfect way to "eliminate" your competition! These cast aluminum performance intakes have a 23-degree manifold configuration. They're designed for standard location intake port cylinder heads. Additional coolant outlets have been added at the rear of the manifold for custom cooling systems. Eliminator intakes can be run "as cast," right out of the box; however, AFR does recommend having the runner exits be "port matched" to your particular cylinder heads for optimal performance. Additional bungs have been cast into the top of the intake runners for EFI injectors or nitrous nozzles. Multiple heights and rpm ranges are available; order the manifold recommended for your application.
( 25 )
$412.65
—
$669.90
Get maximum performance out of your small block Ford with Trick Flow® R-Series intake manifolds. They deliver substantial power increases in the 3,500-7,500 plus rpm range on heavily modified street/strip and race engines. Plus, they're made from A319 aluminum for lighter weight, have integral bosses for nitrous or fuel injection nozzles, and extra material for custom porting. For use with square bore four barrel carbs.
( 8 )
$411.99
—
$416.99
These FAST LSX intake manifolds are the only 3-piece Gen III composite manifolds proven to deliver increased performance without compromising bottom-end drivability or high-rpm horsepower. They easily bolt onto GM Gen III (LS1, LS2, and LS6) engines and are designed to work with the 92mm FAST Big Mouth throttle body. The new stylish black intake manifolds deliver terrific performance right out of the box and can be ported by the customer for even more flow. As requested by previous LSX customers, the FAST LSX intake manifolds feature the added benefits of corrosion-free stainless steel assembly bolts, an improved throttle body sealing flange, and O-ring gasket and threaded insert throttle body mounts that provide increased durability.
( 5 )
$1,163.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
