Availability
Showing In Stock Items. Show All 90 Items.
On Sale
Edelbrock Performer EPS intake manifold and carburetor kits contain all of the necessary pieces to upgrade your induction system. They include an Edelbrock Performer EPS aluminum intake manifold with either a natural aluminum finish or an EnduraShine finish, an intake gasket set, intake manifold bolts, a carburetor stud kit, and a Performer Series 600 cfm electric choke carburetor. The EnduraShine finish is a bright silver chrome finish that resists discoloration from heat and features a clearcoated top coat to enhance abrasion and chemical resistance. The Edelbrock Performer EPS intake uses an all-new runner design tuned to produce substantial torque increases. Ready for a change? Try Edelbrock Performer EPS intake manifold and carburetor kits for your musclecar, hot rod, truck, or ordinary street vehicle.
( 60 )
$830.95
$664.76
On Sale
Edelbrock Performer intake manifolds are low-rise, dual-plane designs with patented runner tuning and a 180 degree firing order that you won't find with the competition. This combination boosts torque over a wide rpm range, from idle to 5,500 rpm. These manifolds also deliver improved throttle response over stock intakes and are available in both EGR and non-EGR style.
( 569 )
$659.95
$509.95
—
$754.95
Breath new life into your 305/350 V8! Edelbrock Performer T.B.I. intake manifolds are stock replacement parts for 305/350 V8s with a factory TBI. They accept all OE equipment and small-bore throttle body injectors.
( 33 )
$519.95
These Performer RPM FE intake manifolds from Edelbrock are designed for high-performance street Ford FE V8s with standard low/medium-rise or Edelbrock Performer RPM FE heads. Their dual-plane constant cross-sectional area design builds low and mid-range acceleration, while optimized runner paths make top-end horsepower. These manifolds have a provision for adding the PCV or breather flange at the rear, and no exhaust crossover passage.
( 37 )
$736.95
—
$865.95
On Sale
Edelbrock Performer RPM Air-Gap intake manifolds incorporate race-winning technology that's been used on Victor Series competition intakes for years. The open air space from the Air-Gap design separates the runners from the heat of the lifter-valley cover. So, the air/fuel mixture stays cooler all the way to the heads, which produces a denser charge for more power. Runners are tuned to move the power band 1,000 rpm higher than Performer Air-Gap manifolds, from idle to 5,500 rpm up to 1,500 to 6,500 rpm.
( 440 )
$681.95
$509.95
—
$860.95
These Vortec manifolds with TBI from Chevrolet Performance are designed for maximum horsepower with throttle body fuel injection and EGR usage. These manifolds will fit all Vortec-designed cylinder heads.
( 17 )
$683.17
Dual plane Chevrolet Performance Parts' Carbureted LT1 intake manifolds make it possible to take advantage of the advancements found in Generation 2 Chevy engines. They allow you to install a carburetor on your LT1 engine without the hassle of running a computer or emission controls. They accept both Holley and Quadrajet carburetors, and feature longer runners that increase engine torque by up to 30 ft.-lbs. without sacrificing top-end power.
( 28 )
$507.67
On Sale
Edelbrock Performer RPM intake manifolds have a high-rise, dual-plane design. They produce incredible top-end horsepower, while retaining good throttle response. Performer RPMs have larger plenums and runners to match the free-flowing exhaust, high-lift cams, and other modifications of a high-output engine. They're intended for high performance street or competition engines that run from 1,500 to 6,500 rpm.
( 222 )
$514.95
—
$689.95
First off, don't let the Jr. fool you--this Pro-Filer Sniper Jr. intake is just as good as its big brother! The Sniper Jr. intake manifold is optimized for engines 68 to 540 c.i.d. and larger with BBC cylinder heads such as Pro-Filer's Sniper and Sniper X with deck heights of 9.8 in. or 10.2 in. Yes, this is the intake those of you that race in a conventional head class have been looking for! They produce remarkable horsepower out-of-the box, with features such as cast injection bosses, 4500 Series carb flange, four corner water bosses, and exclusive as-cast ported plenum and runners, making this Sniper Jr. intake the best in BBC manifolds!
( 6 )
$749.99
Edelbrock Performer RPM Air-Gap LT1/LT4 intake manifolds utilize a proven short runner tunnel-ram style that provides that next level of performance you have been looking for. They are both direct stock replacements for OEM equipment with all required emissions features. The Edelbrock Performer RPM Air-Gap LT1/LT4 intake manifolds are manufactured from aluminum and feature a natural finish. Edelbrock's patended Air-Gap design delivers a cooler and denser air stream for maximum power output. They are designed to work with either stock, 52mm or 58mm Edelbrock throttle bodies, and will accept OEM fuel rails.
( 4 )
$822.95
Chevrolet Performance EFI intake manifolds are ideal stock replacements for your worn or faulty original. These multi-port injection models are made from factory-style materials to OE specifications—for a proper fit and flawless performance. Order the manifold recommended for your vehicle application.
( 1 )
$678.99
Ford Performance has released the 2018-2023 Mustang GT intake manifold to be available as a replacement part for your 2018-2023 5.0L, or as an upgrade for your 2011-2017 5.0L Coyote engine. Custom calibration is required for the 2011-2017 models. When upgrading to this intake, you can expect improved horsepower and torque over the stock manifold. For the quality parts you need for your Ford, choose Ford Performance Parts.
( 3 )
$509.99
Edelbrock Performer RPM Vortec intake manifolds are based on their highly successful Performer family. They're designed for street rods, marine applications, and a host of engine swaps using small block Chevy V8s with 1996 and later Vortec (L31) cast iron heads or Edelbrock's E-Tec aluminum heads. They accept single square bore carbs only and have an external water bypass boss machined into the front of the water crossover for use on 1996 and later Vortec production engines. Their 1,500 rpm to 5,500 rpm power band makes them an excellent choice for a wide range of setups.
( 21 )
$617.95
Performer RPM Dual-Quad intake manifolds are available in two versions, one for small port cast iron factory heads and one for factory large port with Edelbrock's Performer RPM W-Series heads. These manifolds deliver performance improvements in the 1,500 to 6,500 rpm range with Edelbrock Performer Series or Thunder Series AVS dual-quad carburetors, and they accept their dual-quad accessories including fuel lines, throttle linkage, and air cleaners. They include the oil fill tube and matching push-in breather.
( 3 )
$713.95
—
$746.95
On Sale
Dual-plane Edelbrock Performer EPS intake manifolds deliver dyno-proven horsepower gains from idle to 5,500 rpm, when used with Edelbrock's Performer Series square bore or Thunder Series AVS carburetors. Dyno tests showed an extra 5 hp and 9 lbs.-ft. over their own Performer manifolds. The secret is in the runner design, which is tuned to produce substantial torque increases in the 3,000 to 4,500 rpm range--with peak torque at 3,500 rpm. That's power where you need it the most!
( 313 )
$652.95
$511.96
—
$604.95
On Sale
Dual-plane Performer Vortec intake manifolds are based on Edelbrock's popular Performer Series. They're intended for small block Chevy engines fitted with either 1996 and later cast iron Vortec heads or Edelbrock E-Tec aluminum heads. They are great for street rods, engine swaps, or industrial applications. They're set up for either square-bore or spread-bore carburetors and produce power from idle to 5,500 rpm. They have no provision for an exhaust-heated choke.
( 32 )
$540.95
Single plane Chevrolet Performance Parts' Eliminator Vortec intake manifolds mount a single high-flow 4-barrel with a runner and plenum configuration, fine-tuned to produce maximum power and torque from Vortec heads. An open "air-gap" space under the runners is engineered to reduce heat transfer to the intake charge, which helps to further maximize power.
( 2 )
$523.45
Edelbrock Performer 454 TBI intake manifolds deliver outstanding performance for the street while maintaining operational compatibility with OEM accessories. Performer 454 TBI manifolds accept the stock EGR in the stock location.
( 10 )
$562.95
Edelbrock Performer manifolds are designed for street 1987-94 Chevy V6s with factory throttle body injection. They provide outstanding throttle response and torque increases. They accept all factory accessories and hardware, and your throttle body stays in its stock location. A computer chip is available at no charge and is street-legal for 4.3L trucks (E.O. #D-215-21). Return the postage-paid card that comes with the manifold to receive the chip from Edelbrock.
( 10 )
$595.95
These Vortec intake manifolds were designed for ultimate horsepower and torque when used with Vortec cylinder heads. These manifolds offer superior throttle response for street or racetrack use and will clear most stock hoods. Vortec aluminum manifolds will accept either Holley or Quadrajet carburetors and offer provisions for the EGR.
( 5 )
$516.77
Edelbrock Performer RPM dual-quad Air-Gap intake manifolds are designed to give your ride classic hot rod looks with modern-day performance. These manifolds stand just 1 5/8 in. taller than the original Edelbrock low-profile C-26 intakes and offer superior performance improvements in the 1,500-6,500 rpm range. The large runners feature Edelbrock's unique Air-Gap design that separates the runners from the hot engine valley for a cooler, denser charge. These aluminum dual-quad intake manifolds are available in your choice of natural or the popular EnduraShine finishes.
( 21 )
$509.95
—
$595.95
These Chevrolet Performance L76/L92 intake manifolds are designed for use with Chevrolet Performance L76/L92 cylinder heads. They are manufactured from aluminum, have a natural finish, and accept a standard 4-barrel square bore carburetor. The Chevrolet Performance L76/L92 intake manifolds include mounting hardware and feature 3/8 in. NPT vacuum bosses.
( 1 )
$658.87
Chevrolet Performance Vortec dual plane intake manifolds are designed for maximum horsepower and a broad torque curve to give you great performance. These high-rise intakes fit all 283 to 400 c.i.d. small block Chevrolet engines using late model Vortec heads. The lightweight aluminum manifolds accept Holley square bore carburetors and include an externally plumbed hot water crossover passage.
( 5 )
$661.96
Edelbrock Performer 5.8 EFI aluminum intake manifold bases represent the standard for hot 5.8 Liter performance. Their modular design incorporates the latest airflow technology and CAD programming for maximum power gains. They feature a broad power range and the base manifold is CNC port-matched to the upper manifold for maximum performance.
( 1 )
$549.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
