Availability
Showing In Stock Items. Show All 161 Items.
ACDelco GM Genuine Parts fuel pump control modules regulate the voltage supply to the electric fuel pump. These modules receive an electronic signal from the engine control module that determines the voltage applied to the pump, altering pump motor speed and pressure. These GM Genuine Parts replacements provide the performance, durability, and service life you expect from General Motors. Order the model designed for your application.
( 8 )
$55.99
—
$65.99
Mopar Replacement fuel pump control modules are genuine OE replacements designed to monitor your fuel pump. These modules are engineered from high-quality materials to provide you with reliable, long-term service—and the proper fit, form, and function for your vehicle. When it comes to your Mopar, don't leave yourself second-guessing; order the fuel pump control module by Mopar Replacement designed to fit your application.
Not Yet Reviewed
$118.99
Keep your GM vehicle on the road with ACDelco GM Genuine Parts fuel pump driver modules. Built with the same quality and detail as the original, these original equipment fuel pump driver modules provide the reliable and direct-fit finish you need.
( 2 )
$124.99
—
$416.99
Standard Motor fuel pump driver modules restore proper supply and regulation of voltage to the fuel pump and fuel pump relay. These direct-fit replacements ensure ease of installation; they undergo extensive testing and validation for proper performance and peak reliability. Programming is required after installation. Modules are available for a wide range of vehicles, including many Chevrolet, GMC, Hummer, Saturn, Cadillac, and Buick cars, trucks, and vans from the early 2000s and up.
Not Yet Reviewed
$73.99
—
$165.99
Hitachi fuel pump driver modules assist in maintaining the optimum fuel pressure and fuel delivery to your engine. Whether replacing a failing unit or a stock unit that can't keep up with your modified engine, Hitachi offers many different modules to tune up or upgrade the performance of your vehicle's fuel system. Choose the fuel pump driver module best suited to your vehicle.
Not Yet Reviewed
$47.99
—
$67.99
Dorman fuel pump drivers are designed to control the fuel flow on an electronic injection fuel pump. They feature two transistors mounted on their backsides that generate heat that has to be dissipated, ultimately eliminating common heat soak problems. Save yourself from your vehicle shutting down while driving with Dorman fuel pump drivers.
( 11 )
$64.99
—
$177.99
On Sale
Holley Sniper offers OE-style 255 lph EFI fuel pump modules for a wide range of vehicles, including many Chevy, Pontiac, Buick, Oldsmobile, GMC, Ford, Mercury, Jeep, Dodge and Plymouth cars and trucks from the 1950s, '60s, '70s, and '80s. These in-tank modules are high-pressure units that flow 255 liters per hour (LPH) and are capable of supporting electronic fuel injection (EFI) engines producing up to 550 hp. A pre-calibrated fuel level sending unit designed to work with the factory fuel gauge for this application is included. Each module also features a HydraMat filter which has a unique internal reservoir that keeps fuel available at the pick-up and also provides protection from contaminates. Fuel pressure is internally regulated to 58 psi, eliminating the added expense and effort of purchasing and installing an external fuel pressure regulator; no separate return line is required because these modules return excess fuel right inside the tank! The Holley Sniper EFI fuel pump module was designed as a direct replacement for your factory pick-up and sending unit. There's no need to purchase a custom EFI fuel tank. You can even retain the factory fuel hard line—just connect the outlet of the pump module to the hard line on your vehicle with EFI-rated fuel hose and hose clamps available in the Earls Vapor Guard line.
( 10 )
$466.95
$285.95
—
$525.95
Holley Sniper in-tank retrofit fuel pump modules offer the easiest way to convert your vehicle to an in-tank EFI fuel system. Available in return and returnless versions, these 340 lph pumps are easy to install with basic hand tools and require no welding or fabrication. They include a diecast pump hanger bracket to control pump vibration in a low-profile design that's perfect wherever space is at a premium. You can locate the module beside your existing sending unit anywhere in the tank and rotate it a full 360 degrees to work flawlessly with various plumbing and wiring configurations. Once the module is installed, all you need to do is connect your power source/ground and fuel lines. Up your fuel game with an assist from the Holley Sniper in-tank retrofit fuel pump modules best suited for your application. Features and specs include: * Models available for various fuel tank depths, including adjustable (7-12 in.) versions * The low-profile design is only 1.275 in. thick above the tank mounting surface for added clearance when needed * The innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and rotate the unit 360 degrees for easier clocking of the plumbing and wiring locations * Diecast aluminum construction for corrosion resistance and long-lasting good looks
( 27 )
$315.95
—
$649.95
When it comes to converting to EFI, it's important for the fuel pump to be installed in a cool area and what better place than in the gas tank itself. The pump is cooled by the fuel, it's quieter plus there's no chance of fuel starvation. To help ease the installation of an in-tank pump, we offer a new Go Fuel In-Tank Module assembly. This universal billet assembly can be used on tanks with a depth of 6 to 15 inches. The billet aluminum was designed with the supply and return ports in a parallel position to help route the fuel lines easily and evenly. The vent port is on the other side to ease routing the line near the fill tube. The two fuel ports are threaded to accept -6 AN O-ring boss fittings for a secure, leak-free connection. The cut-to-fit bracket secures a 340 LPH pump capable of providing fuel to 600 horsepower engines. To ensure clean fuel is pulled into the pump, two size of sock/filters are provided, a standard 11 square-inch design as well as a large, 35 square-inch version. Go Fuel in-tank modules are a direct fit into fuel tanks offered by TANKS Inc.
( 25 )
$150.00
—
$532.00
Holley in-tank retrofit fuel modules are the easiest way to convert your vehicle's factory tank or fuel cell to an in-tank, EFI fuel system—and gain all the benefits of a Holley Hydramat reservoir, as well. This conversion requires only basic tools, no welding or fabrication. The low-profile, aluminum module design includes a billet pump hanger bracket to control vibration; Holley's innovative clamping system and integrated fuel pump allow you to locate the module anywhere in the tank beside your existing sending unit. Once installed, simply hook up your fuel lines and your power source/ground, and you're ready to roll. Holley in-tank retrofit modules are available with fuel pumps for both return and returnless-style systems—and models to support various liters per hour (LPH). Additional details: * Installs in any fuel tank to fit a wide range of applications * The low-profile design is only 1.275 in. thick above the tank mounting surface for added clearance * Clamping system allows you to rotate the unit 360 degrees for easier clocking of plumbing and wiring * Hydramat fuel reservoir's 3 x 15 in. mounting flange has six clocking pin locations for 360 degree adjustment * Black anodized aluminum construction to resist corrosion * 1/4 in. NPT ports available for numerous plumbing options * Ideal for Terminator EFI, Sniper EFI, MSD Atomic EFI, or any TBI or EFI conversion * Optional rollover valve available
( 8 )
$799.95
—
$999.95
On Sale
You will not find an easier way to upgrade your fuel system than the Holley Sniper OE Style 350 LPH EFI Fuel Pump Modules. They are a direct replacement that fits your factory fuel tank, so you don't have to guess when it comes to something as important to your project as the fuel system. Because it was designed as a direct replacement for your factory pick-up and sending unit, there is no need to purchase a custom EFI fuel tank. You can even retain your factory fuel line. Simply connect the outlet of the pump module to the hard line on your vehicle with EFI-rated fuel hose and hose clamps available in the Earl's Vapor Guard Line. Features: * The in-tank fuel pump module is a high-pressure unit that flows 350 liters per hour (LPH) and is capable of supporting EFI (electronic fuel injection) engines producing up to 750 horsepower * Includes a pre-calibrated fuel-level sending unit designed to work with the factory fuel gauge for your application * Solves all the usual issues of converting from carburetor to EFI
( 25 )
$632.95
$339.95
—
$649.95
Using all OEM components, Aeromotive VaporWorx Super fuel modules are drop-in units (for specific applications) that excel above 65 psi and perform well at elevated voltage levels. Super fuel modules are compatible with GM FSCM/returnless systems, as well as the VaporWorx standalone PWM returnless controller—no modifications should be needed. Aeromotive VaporWorx Super fuel modules include a new fuel level sensor—40 ohms full/250 ohms empty.
Not Yet Reviewed
$770.25
Aeromotive VaporWorx BoostWorx returnless PWM kits for ZL1 fuel pump modules have everything needed to provide a standalone, OE-type returnless fuel system with constant or manifold referenced fuel pressure. When used with the popular and affordable GM Gen5 ZL1 Camaro, C7 Corvette, Aeromotive Super ZL1, and many other GM-compatible fuel pump modules, these systems will provide constant pressure or any base pressure with a 1:1 manifold referenced (supplied MAP sensor based) fuel pressure—operating like a mechanical fuel pressure regulator would with the ECM calibrated in the same manner. The simplicity of these kits comes with connecting the supplied standalone MAP sensor to the pressurized side of the intake manifold, just like connecting a boost gauge or manifold referenced fuel pressure regulator. For constant fuel pressure simply leave the MAP sensor portion of the kit disconnected. BoostWorx ZL1 controllers feature: * Everything needed electrically to drive the fuel pump module--no relays, external regulators, or return lines are required * Unmatched low fuel level capability * Up to a 2/3 reduction in power to the fuel module during idle and cruise vs. traditional systems * 40-amp minimum continuous power rating in a compact controller package * Over-temperature shutdown with automatic reset * Short circuit protection that will operate indefinitely without damage * OEM Delphi/Aptiv connections for terminals, seals, and connector bodies * All cross-linked polyethylene wiring * UL94 rated components used throughout * Integrates into the OE ECM to allow all safety systems to remain functional * 10 to 22 V operating capacity -- Can be used with voltage boosters -- Lower than 10 V applied to the turn on circuit will cause controller shutdown to protect from an AFR lean condition * Billet aluminum VaporWorx MAP sensor bracket and 3bar pressure sensor
( 1 )
$525.15
—
$577.15
Holley 525 LPH fuel pump modules are designed and engineered to meet the demands of today's high-pressure and high-flow engines with efficiency, reliability, and decades of engineering expertise. These high performance components with OE-quality and fitment in mind will deliver maximum fuel flow throughout a wide pressure range to support major horsepower. Kit includes assembled module, a new filter sock, flange O-ring, and the lock ring to help complete installation into stock fuel tanks. Holley 525 PLH fuel pump module features: * 6061-T6 Aluminum fuel pump module with a 525 LPH (liters per hour) * Sniper pump assembly drops into stock EFI fuel tank on select vehicles * 6AN O-ring outlet and return ports for easy plumbing connections * Can be used with both carbureted and EFI (Electronic Fuel Injection) fuel systems depending on your needs * Supports up to 1200 EFI or 1450 carb (hp at 60 psi at 13.5 V/16.9 amp draw; individual systems will vary based on fuel system design, the regulator type, fuel cell location, etc.) * Flange is bright dip black anodized for corrosion protection from undercar moisture
( 2 )
$431.95
Updating your racing fuel system to EFI is so simple! Holley Sniper presents their latest diecast fuel cell EFI pump modules designed to drop in as a direct replacement for your existing 6- or 12-bolt flange fuel cell cap assembly. The diecast aluminum top flange includes an -6AN inlet port, a -6AN outlet port, and a fuel filler cap. The fuel pump depth is fully adjustable from 7.5 in. to 11 in. deep. The EFI modules are available with single 340 lph fuel pumps in both return and returnless system designs. These fuel cell EFI fuel pump module kits include all the hardware to install into your existing fuel cell. All that you need to add is your fuel line. Features include: * Easy way to update your fuel cell to EFI * Designed to drop right into your existing 6-bolt flange fuel cell * Diecast aluminum top flange housing includes a -6AN inlet and -6AN outlet port and a fuel filler cap * Pump depth is fully adjustable for fitment in the most popular cell sizes 7.5 in. to 11 in. * EFI modules are available with single 340 lph fuel pumps in both return and returnless system designs
( 9 )
$424.95
—
$475.95
Holley Sniper in-tank fuel pump modules are direct-fit units to drop directly into the specific vehicle application. Two modules--the Sniper 340 lph and Holley 525 lph--feature a 6061 T-6 flange that has a bright dip black anodized finish for corrosion protection and long-lasting good looks. The flanges have a 6AN O-ring outlet and return port making the plumbing connections easy. The assembled modules include a new filter sock and the lock ring to complete the installation into your stock fuel tank. Choose the module designed for your vehicle. Notes: * Includes a pre-calibrated fuel-level sending unit designed to work with the factory fuel gauge for the specific application * 340 lph module supports up to 700 EFI or 900 hp carbureted * 525 lph module supports up to 1,200 EFI or 1,450 hp carbureted * Both EFI and carbureted systems will need a bypass design regulator
Not Yet Reviewed
$519.95
DeatschWerks X2 Series fuel pump modules are available for a variety of models. These assemblies are compatible with gasoline or ethanol. Order the model recommended for your application.
( 1 )
$429.00
—
$1,429.00
Summit Bucks
Delphi fuel pump module assemblies are nickel plated with all-steel internal components. They feature internal guide rod springs and external rubber feet for enhanced stability and reduced noise from vibration. These fuel pumps have little flow or pressure variation in hot fuel situations. Delphi fuel pump modules are designed to be OE replacements.
( 250 )
$70.99
—
$1,762.99
On Sale
Holley diecast in-tank retrofit fuel pump modules are quick and easy ways to convert your factory tank or fuel cell into an EFI in-tank fuel system, while also adding the benefits of a Holley HydraMat in the process! The conversion is easily accomplished with basic tools and requires no welding or fabrication. The aluminum module design includes a diecast pump hanger bracket to control pump vibration, while also providing a low-profile design to fit where space is at a premium. Holley's innovative clamping system and integrated fuel pump makes it a simple install. Interested in an EFI retrofit kit, but can't get past the complicated fuel system? Holley diecast in-tank retrofit fuel pump modules are your solution. They're available in various flow rates, as well as return and returnless versions. Features include: * Installs in any fuel tank from 6.5 in. to 12 in. deep (depending on kit) to fit a wide variety of applications * The low-profile design is only 1.275 in. above the tank mounting surface for added clearance when needed * The innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit * The clamping system allows you to rotate the unit 360 degrees for easier clocking of the plumbing and wiring locations under your ride * Includes innovative Holley HydraMat to ensure consistent fuel supply. The 3 in. x 15 in. HydraMat mounting flange has six clocking pin locations to allow for 360 degrees of adjustment to clear sending unit levels or any tank floor restrictions that you might encounter * Diecast aluminum construction for corrosion resistance and long-lasting good looks * 1/4 in. NPT ports for a wide variety of plumbing options * Ideal for Terminator EFI, Sniper EFI, MSD Atomic EFI, or any TBI or EFI conversion * Two different fuel pumps are available—255 lph or 400 lph for both return and returnless-style systems
( 13 )
$849.95
$399.95
—
$699.95
DeatschWerks have taken their DW400 electric fuel pump and turned it into an in-tank drop-in module. These modules feature a fuel pump that flows 415 lph and uses an impeller made of a lightweight composite that's impervious to fuels like E85 and race fuel. DeatschWerks DW400 in-tank electric fuel pump modules are available for a variety of applications.
( 8 )
$449.00
—
$1,749.00
On Sale
Holley fuel cell EFI pump module assemblies are the easy way to upgrade your racing fuel system! And even though the name includes EFI, the modules can also be used as an upgrade for carbureted systems, with the proper regulator. Designed as drop-in direct replacements for your existing 6 or 12-bolt flange fuel cell cap assembly, the billet top flange includes an 8 AN inlet port, a 10 AN outlet port, and a fuel filler cap. They offer a fully adjustable fuel pump depth from 7.5 in. to 12 in. deep, and the modules are available in single or dual 255 lph and 450 lph fuel pump configurations. Holley fuel cell EFI pump module assemblies include all the hardware to install into your existing fuel cell—all you need to add is your fuel line. Order the model that best suits your application.
( 6 )
$649.95
$311.95
—
$828.95
Agility Auto Parts offers a complete line of fuel module assemblies covering a wide variety of North American vehicle applications. Engineered and manufactured in a highly automated and dust-free environment, they meet or exceed all OEM specifications for fit, form, and function. Premium quality is ensured through stringent performance and reliability testing for pressure characteristics, flowrates, electrostatic discharge, and leaks. Agility Auto Parts fuel pump module assemblies include all the necessary components for a drop-in replacement right out of the box!
( 14 )
$59.99
—
$637.99
DeatschWerks DW300 X2 Series fuel pump modules include accommodation for pumps, integration of a return fuel line, and retention of all the functionality of OE module. The DW X2 Series modules consist of a top-hat, center section, and OE lower bucket. These components work together to deliver the flow you need and the functionality you want. Choose the model designed for your vehicle.
Not Yet Reviewed
$799.00
Aeromotive 1988-97 Chevy Truck Dual 340 in-tank fuel pump modules are direct drop-in units for the specified years of GM 1500/2500 V8 trucks. Featuring dual 340 lph pumps, they can support up to 1,400 FWHP on gas/fuel injection/forced induction and up to 980 FWHP on E-85/fuel injection/forced induction. 100 micron pump pre-filters are included. Additional features: * No drilling required for installation * Individual wiring terminals for each pump to accommodate a staged system * Single -08 ORB outlet port for easy plumbing * Outlet, return, and vent ports include -08 90-degree swivel fittings * Vent port adapter fitting * 0-90 Ohm fuel level sender
Not Yet Reviewed
$629.22
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
