Availability
Showing In Stock Items. Show All 15 Items.
On Sale
Holley in-tank retrofit fuel modules are the easiest way to convert your vehicle's factory tank or fuel cell to an in-tank, EFI fuel system—and gain all the benefits of a Holley Hydramat reservoir, as well. This conversion requires only basic tools, no welding or fabrication. The low-profile, aluminum module design includes a billet pump hanger bracket to control vibration; Holley's innovative clamping system and integrated fuel pump allow you to locate the module anywhere in the tank beside your existing sending unit. Once installed, simply hook up your fuel lines and your power source/ground, and you're ready to roll. Holley in-tank retrofit modules are available with fuel pumps for both return and returnless-style systems—and models to support various liters per hour (LPH). Additional details: * Installs in any fuel tank to fit a wide range of applications * The low-profile design is only 1.275 in. thick above the tank mounting surface for added clearance * Clamping system allows you to rotate the unit 360 degrees for easier clocking of plumbing and wiring * Hydramat fuel reservoir's 3 x 15 in. mounting flange has six clocking pin locations for 360 degree adjustment * Black anodized aluminum construction to resist corrosion * 1/4 in. NPT ports available for numerous plumbing options * Ideal for Terminator EFI, Sniper EFI, MSD Atomic EFI, or any TBI or EFI conversion * Optional rollover valve available
( 9 )
$849.95
—
$999.95
$763.95
—
$898.95
On Sale
PowerFlo is the latest OEM replacement performance in-tank lift pump from the diesel experts at Fleece. It's the only in-tank lift pump capable of supporting up to 800 hp, including dual CP3 pump configurations! The PowerFlo assemblies retain the factory water-in-fuel sensor, factory fuel heater, and factory fuel lines—and installation takes half the time of other high-flow pumps. Two is always better than one, and the PowerFlo delivers with two OEM-quality gerotor pumps, increasing flow capacity and reliability over the factory pump. The active fill bucket eliminates the need for tank sumps, draw straws, additional air filtration, and the 1/4 tank issues typically encountered when seeking a higher flow lift pump to meet your engine's need. Order the Fleece Performance PowerFlo in-tank lift pump assembly recommended for your vehicle.
( 7 )
$889.00
—
$1,099.00
$755.65
—
$934.15
On Sale
If you are adding nitrous or boost to your 2010-2015 Camaro race car, Holley has the fuel pump upgrades for you, like these dual in-tank pumps. The fuel pump module design starts with a billet pump flange assembly and connects it to dual 340 or 450 LPH fuel pumps for maximum fuel delivery. The module also includes two HydraMats to eliminate fuel starvation under hard acceleration or cornering. The integrated jet pump assembly allows retention of factory drivers side fuel pickup. A new level sensor is included and pre-installed. Installation is as simple as removing factory module and replacing with Holley module. Select the dual in-tank pump model that's designed for your application. Features and benefits: * Machined, billet, anodized, laser-etch components for durability and good looks * -8AN ORB inlets and outlets (return fitting included) * Two HydraMats, one for each pump * Integrated jet pump assembly allows retention of factory drivers side fuel pickup * Have been tested to deliver stable fuel pressure down to low fuel indicator warning light * Brand new level sensor included and pre-installed to make installation as simple as removing factory module and replacing with Holley module * Outlet fitting included to connect to factory feed line * Secondary ORB port machined into flange for easy AN plumbing of feed line * Module is return-style only so a regulator must be installed
Not Yet Reviewed
$949.95
$853.95
On Sale
FUELAB flange mount variable speed fuel pumps offers ease of use with fuel cells or fabricated reservoirs. These SAE 10-bolt H/E Series brushless screw pumps are able to support 1,200 hp at 60 psi, while consuming less than 10 amps of current, making them some of the most efficient single pump offerings available anywhere. They are great for boosted applications, as well as with 100 psi pressure capability, while still exceeding 400 lph and only 13 amps of current draw. Features: * Twin screw rotor pumping mechanism * Lightweight super-efficient DC brushless motor minimizes current draw * 12 V vehicle electrical system compatibility * Integrated controller with PWM speed control * Compatible with gasoline, diesel, methanol, and ethanol * Rated to flow 250, 350, or 500 lph at 45 psi, 125 psi max * Compact, lightweight design is less than 2.5 lbs. * Overall length 8 in. and pump diameter of 2 in.
Not Yet Reviewed
$1,199.00
—
$1,249.00
$1,079.10
—
$1,124.10
On Sale
Summit Bucks
FUELAB Prodigy fuel pumps work to keep your fuel cool. Their variable-speed operation helps to avoid fuel vaporization, allowing them to be run in continuous-duty operation for street or strip usage. They feature billet aluminum construction with an anodized finish, along with a unique housing shape for extremely quiet operation and steady pressure. The pumps use a lightweight, super-efficient DC brushless motor to reduce current draw; plus, carbon 9-vane construction with a low-mass, pressure-balanced rotor for high-speed reaction to changes in speed and flow; powerful, high-flux density neodymium rare earth magnets; and an internal variable-speed controller. FUELAB Prodigy fuel pumps work with 12 V or 16 V electrical systems and are compatible with gasoline, diesel, methanol, and ethanol fuels.
( 9 )
$1,063.00
$956.70
On Sale
FUELAB dual pump fuel surge tank systems are ideal for Autocross or off-road use—where fast changes in g-forces can allow air to be picked up by the main fuel pump. FUELAB fuel surge tank systems maintain a small amount of fuel to operate their own internal fuel pump that can supply high fuel flow rates, while only needing a relatively low fuel flow rate from the main fuel pump. A return line is required to return excess fuel back to the vehicle's fuel tank. Every FUELAB surge tank features a high-quality billet aluminum construction and long-lasting finish. There are two different sizes available to fit your specific needs.
Not Yet Reviewed
$897.00
—
$905.00
$807.30
—
$814.50
On Sale
FUELAB Gold fuel cell quick-service surge tanks (QSST) come base as a "bare" unit without a lift pump and with an empty fuel pump hanger in the surge tank. (FUELLAB has options to add three different lift pumps, five different surge pumps, remote fuel fill, fuel level sensor, and a fuel tank vent kit.) Quick-service surge tanks are compatible with both brushed or brushless lift and surge pump options. Product features: * Quick Service Surge Tank for fast pump service * Provides protection against fuel slosh from standard fuel cell pump hangers * Fits the industry standard 24-bolt fill plate bolt pattern * Gasoline, Ethanol (E85), and Methanol compatible * Rollover flap protection * Fuel tank vent with rollover protection * Gaskets and hardware included * Stock with empty fill neck hole to give you options * WHAT MAKES THE FUELAB QSST BETTER? FUELAB's Quick Service Surge Tank is exactly that. You can service your Surge Tank Pumps in minutes. With only 10 bolts on top, you can pull the Surge Tank Pump Hanger out of the top of the cell and service your pumps quickly! Whereas most competitors require you to pull the entire 24 bolt plate, then remove the surge tank housing from the bottom to finally access your pumps. FUELAB units are compatible with Brushed and Brushless pumps for both the Lift Pump and the Surge Tank Pump(s), or a combination of the two using the same Base Plate. Base plates come standard in two enticing anodized colors, Titanium and Gold. Kit includes: * FUELAB QSST base plate and surge tank * Fuel tank vent with rollover protection * Lift pump hanger with pump mount * 3-Terminal for option of brushed or brushless lift pump * Fuel level sender block-off plate and gasket * Open fuel filler hole for customization (gasket included) * Empty dual pump fuel surge tank hanger (fits brushed or brushless pumps) * Corrugated fuel hose for lift pump into surge tank (NOTE: Don't forget to add on your FUELAB Fuel Filler Kit, Fuel Level Sender, and Fuel Cell Vent Kit!)
Not Yet Reviewed
$1,175.00
$1,057.50
On Sale
Summit Bucks
FUELAB in-tank twin screw brushless fuel pump kits are available for a variety of flow rates, ranging from 79 gph (300 lph) to 291 gph (1,100 lph); and horsepower ratings from 650 to 2,800 hp. The pumps are black anodized for protection and long-lasting performance—and include a 65 micron straining filter. These aftermarket replacements offer an array of features: --- Pump features: * Compatible with gasoline, diesel, methanol, and ethanol * Twin screw rotor pumping mechanism * 125 psi max operating pressure * 650 to 2,800 hp power support (depending on model) at continuous speed (pump gas, naturally aspirated) * Higher efficiency means less current draw and less noise * Superior priming capabilities * Greater resistance to cavitation (vapor lock) --- Motor features: * Lightweight super-efficient DC brushless motor to minimize current draw * Powerful high flux density Neodymium rare earth magnets * No motor brushes to wear out or corrode (low-sulfur diesel, no problem) * Wet motor design, no dynamic shaft seals that can wear out --- Controller features: * 12 to 16 V vehicle electrical system compatibility * Pump controller included for full speed, PWM (or 0-5 V input speed control, some models) * Continuous duty motor speed --- Construction features: * Compact, lightweight design, less than 3 lbs. * Billet aluminum construction with anodize per MIL-A-8625, Type II * Long life, multi-fuel compatible fluorosilicone static seals * Accepts standard or port style -8 AN fittings --- Pulse Width Modulation compatibility (PWM) * Compatible with most aftermarket ECU's with PWM output frequency * Compatible from 100Hz to 5000Hz * AEM * ECU Masters * Fueltech * Haltech * Holley * Link Engine Management * Megasquirt
Not Yet Reviewed
$1,099.00
—
$1,199.00
$989.10
—
$1,079.10
On Sale
Summit Bucks
FUELAB high-efficiency EFI inline twin screw fuel pumps are available in a variety of flow rates, ranging from 79 gph (300 lph) to 291 gph (1,100 lph); and horsepower ratings from 650 to 2,800 hp. These electric external street/strip pumps are black anodized for beauty and protection from rust and corrosion. They're offered in universal and remote mount options.
Not Yet Reviewed
$1,149.00
—
$1,199.00
$1,034.10
—
$1,079.10
On Sale
aFe DFS 780 fuel pumps are powered by your stock ignition and can be run independently or in parallel with the factory fuel pump. They feature helical bronze spur gears that are more forgiving of contaminants than steel gears and they run quieter than normal straight-cut gears. The billet aluminum manifold holds the fuel pump and houses the clear high-impact polycarbonate sight glass for visual inspection of fuel. These fuel pumps are supplied with a plug-and-play wiring harness with Deutsch weather-proof connectors; no cutting or modification is required for installation. High-quality Viton® seals are used, making them compatible with both diesel and biodiesel fuels.
( 1 )
$999.00
$899.10
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
