Availability
Tanks Inc. GPA Series fuel pumps are designed to be used in many die-stamped, alloy-coated, and stainless steel gas tanks which have factory-installed reservoir trays. The tray is an absolute necessity for fuel injection in order to prevent fuel starvation when accelerating and cornering. These pumps are available in four different operating ranges in order to supply up to 1,000 hp. An internal wiring harness, supply line, return line, filter sock, and insulator sleeve are included. The heavy 10-gauge, no-warp mounting plate contains fittings for the supply, the return, the vent, and the electrical connector.
( 73 )
$210.99
—
$249.99
These Red electric fuel pumps from Holley feature an improved design for street and strip applications, and a tumble-polished billet look with the distinctive red logo. These pumps have a 97 gph flow rate, draw only 2 amps, and have a maximum pressure of 7 psi with an externally accessible pressure relief valve. They weigh only 2.88 lbs., and include a mounting bracket.
( 277 )
$199.95
Walbro electric in-tank fuel pumps are available in a variety of flow ratings, including pumps that flow significantly more fuel at higher pressure. The outside dimensions, however, of many pumps are compact enough to fit existing hanger assemblies, without modification. All pumping components have been validated to OEM specifications for use in E85/flex fuel applications. Most Walbro in-tank fuel pumps utilize a proven gerotor design. Some high-performance models, including those designed for engines with more than 750 hp, feature a dual-channel turbine design for maximum efficiency in high-pressure and high-temperature applications. The blades feed two high-pressure pumping channels, as opposed to a conventional single-stage pump that uses an impeller with a single row of blades at its outer edge. This innovative design results in improved hot fuel flow, as well as minimal noise and current use, resulting in efficiency that's higher than conventional pumps. Some pumps require modifications to system wiring, fuel lines, and the fuel module, and should be professionally installed. Installation kits including a fuel strainer, fuel hose, harness pigtail, clamps, and wire connectors are sold separately.
( 364 )
$101.99
—
$271.99
Blue electric fuel pumps from Holley feature an improved design for street and strip applications, a new lower housing casting for enhanced fuel flow, and a tumble-polished billet look with the distinctive blue logo. These pumps have a 110 gph flow rate, draw only 3 amps, and have a maximum pressure of 14 psi. They weigh only 3 lbs., and include a mounting bracket.
( 301 )
$226.95
—
$239.95
Edelbrock Performer RPM street fuel pumps are designed for use with all Edelbrock carburetors used in Performer or Performer RPM applications. These high performance street fuel pumps feature a high-quality, 3-stage polished finish. The unique valve design improves flow quantity and quality—and will support engines with up to 600 hp. The high-volume, 3/8 in. NPT inlet and outlets surpass the capacity of many other pumps. Performer RPM street fuel pumps produce 6 psi and do not require a regulator; and the clockable lower housing can be rotated for the best inlet and outlet alignment. They're designed for use with gasoline only.
( 415 )
$177.95
—
$227.95
AEM Electronics high-flow external electric fuel pumps are designed for high performance, naturally aspirated, and forced induction EFI. They deliver reliable service and high volumes of fuel flow for roughly half the cost of comparable performance fuel pumps. The pumps include a rubber sleeve, end caps, a pre-filter, hose, clamps, and flying lead. Select the model with the size, psi limit, and flow rate needed for your application.
( 34 )
$189.95
Aeromotive universal bypass fuel pressure regulators are dual purpose—for use with fuel systems in street or track applications. They feature adjustable base pressure and are ideal for vehicles/systems where superior flow and pressure control are desired. The regulators are available in different styles and pressure ranges, and for fuels such as gasoline, diesel, and flex.
( 174 )
$201.55
—
$235.00
Aeromotive Stealth electric fuel pumps provide your ride with the fuel it needs to own the road or the track. They feature a compact, lightweight design that will bolt into most existing hanger assemblies, making them an easy upgrade to your fuel system. These versatile components utilize a turbine pumping mechanism that increases durability and allows use in most pulse-modulated applications. Don't settle for lesser fuel pumps; feed your engine with the Aeromotive's Stealth fuel pumps best suited for your application!
( 179 )
$157.00
—
$271.05
Holley 100 gph in-line electric fuel pumps are designed for high-output naturally aspirated and forced induction EFI and carbureted vehicles. They support up to 900 EFI or 1,050 carbureted horsepower, and is compatible with pump gas, race gas, diesel, or E85. The pumps utilize inlet and outlet connections that make installation easy on new applications and quick replacement of existing competitor fuel pumps. Holley universal 100 gph in-line electric fuel pumps include a male -6 to -8 AN discharge fitting with integral high-pressure check valve, terminal nuts, terminal boots, and installation instructions. Additional features and specs: * Roller vane design provides fuel pressure and volume to support up to 900 EFI N/A or 700 EFI boosted horsepower * Compatible with Flex Fuel (E85/E90) and all types of gasoline (100 percent alcohol fuels may diminish fuel pump life) * Inlet thread is -10 AN female ORB (O-ring port fitting) and discharge is a female -6 AN ORB
( 24 )
$217.95
Our Summit Racing™ fuel pump and regulator kits feature your choice of 105 gph or 140 gph free flow at a maximum fuel pressure of 14 psi, drawing 4 amps. The pump and regulator feature 3/8 in. NPT ports and include mounting brackets. Not compatible with alcohol fuels.
( 75 )
$133.99
—
$175.98
Stealth 340 pumps are high-output, in-tank, electric fuel pumps for fuel injected and carbureted applications. At a volume rate of 340 liters per hour. These universal pumps bolt into many existing hanger assemblies, and are a direct fit upgrade for many OE applications. These pump will support up to: * 1000 HP (carbureted/naturally aspirated) * 850HP (carbureted/forced induction) * 850HP (EFI/naturally aspirated) * 700HP (EFI/forced induction) * 700HP on E85 (carbureted/naturally aspirated) * 595HP on E85 (carbureted/forced induction) * 595HP on E85 (EFI/naturally aspirated) * 490HP on E85 (EFI/forced induction)
( 16 )
$157.00
Multi-port EFI systems require a stable fuel supply to maintain the best performance throughout the engine's rpm range. MSD high-pressure, high-flow fuel pumps feature a roller vane pump mechanism, which is extremely resistant to clogging and jamming. The pumps mount in-line (out of the tank) with two supplied cushioned clamps for a quick and sturdy installation. The wire terminals feature brass studs for secure connections. These MSD pumps are ideal as "boosters" for nitrous oxide applications, or as stand-alone pumps for multi-port EFI systems on engines up to approximately 500 hp.
( 49 )
$162.95
BD Diesel Killer grid heater upgrade kits are purpose-built to address a major flaw in the 6.7L Cummins engine--the electrical connection to the intake grid heater. When powering the grid heater, 200 amps pass through a small bolt and nut inside the intake and over time is known to deteriorate and eventually arc and break off. The nut drops into the engine, leading to extensive damage to the piston, head, and valves. BD's Killer kits upgrade that flawed electrical circuit by eliminating the problematic bolt and nut inside the intake while retaining stock functionality of the heater. The kits are cost-effective and easy to install. Additional features: * Allows for full heat output with the stock intake grid heater * Fully emissions compliant * No modifications or tuning required * Self-locking threads built into the lower busbar prevent backing out and compromising electrical connection * Kit includes replacement hardware and gaskets, along with special tools required for the job
( 3 )
$201.95
Part of Holley's complete line of fuel system products, Holley HP billet fuel pressure regulators are available in a variety of configurations for carbureted or fuel injected engines. Some versions are even adaptable to either carburetors or EFI. They allow you to upgrade a carbureted system to EFI without replacing the fuel pressure regulator. All HP billet fuel pressure regulators feature a 2-port design, provide for precise fuel pressure adjustments, and are available in your choice of demand (no return line) or by-pass (with a return line) styles. Depending on the model, they are for use only with electric fuel pumps, or with either mechanical or electric pumps. Designed for street/strip applications, they are CNC-machined from 6061 T-6 billet aluminum for strength and have bright dip anodized black bodies with clear dip anodized tops for corrosion resistance and good looks. Whatever your fuel system needs, Holley has you covered. Depending on model, features may include: * Adjustable from 4 to 65 psi for use with EFI or carburetors * 4.5 to 9 psi adjustment range for use with carburetors only * EFI-only models are adjustable from 15 to 65 psi * Two port sizes available, 3/8 in. NPT or -6 AN inlet/outlet and return (where applicable) * Fitting for manifold reference * 1/8 in. NPT gauge port * Boost reference--1:1
( 154 )
$149.95
—
$260.95
Aeromotive A1000 Gen-II EFI fuel pressure regulators feature excellent control, superb durability, and a high-flow design suited for medium to high-horsepower powerplants. These units have been downsized and lightened up, and yet remain as incredible as ever. They're compatible with alcohol or gasoline, have a 1/8 in. NPT gauge port, and are available in either -6, -8, or -10 AN inlets with a -6 return. Keep your vehicle's engine roaring with Aeromotive A1000 Gen-II EFI fuel pressure regulators.
( 5 )
$271.05
Aeromotive offers compact EFI regulators for applications producing up to 1,000 hp, where space is at a premium. Their compact design fits small engine compartments while providing big performance. They ideally work with EFI systems where only one inlet is needed.
( 24 )
$201.55
Multi-port EFI systems need a stable fuel supply at any rpm, and Summit Racing™ high-pressure, high-flow electric fuel pumps supply it. Summit Racing™ high-flow pumps also have 5/16 in. inlet and outlets, brass stud terminals for secure connections, and two included cushioned clamps for inline mounting. They're ideal as stand-alone pumps for multi-port EFI systems on engines making up to 500 hp, or as boosters for nitrous applications. Mounting bolts and fuel filter are included.
( 6 )
$109.99
Bosch electric fuel pumps are designed to provide accurate, consistent fuel pressure for your engine. They're manufactured from quality materials and will deliver reliable, optimum performance. Available in different styles and configurations, the Bosch electric fuel pumps are sure to furnish your engine with an adequate and consistent fuel supply. Order the replacement model recommended for your vehicle application.
( 20 )
$100.99
—
$265.99
Summit Bucks
ACDelco GM Genuine Parts high-output in-tank fuel pumps are made to fit your specific GM vehicle, providing the performance, durability, and service life you expect. They consist of a reservoir and jet pump, a fuel level sender, and an electric fuel pump with an integral strainer sock. These fuel pumps are designed with guide rods to retain proper alignment while reducing pinching, and to help eliminate high resistance due to vehicle vibration.
( 18 )
$239.99
When it comes to converting to EFI, it's important for the fuel pump to be installed in a cool area and what better place than in the gas tank itself. The pump is cooled by the fuel, it's quieter plus there's no chance of fuel starvation. To help ease the installation of an in-tank pump, we offer a new Go Fuel In-Tank Module assembly. This universal billet assembly can be used on tanks with a depth of 6 to 15 inches. The billet aluminum was designed with the supply and return ports in a parallel position to help route the fuel lines easily and evenly. The vent port is on the other side to ease routing the line near the fill tube. The two fuel ports are threaded to accept -6 AN O-ring boss fittings for a secure, leak-free connection. The cut-to-fit bracket secures a 340 LPH pump capable of providing fuel to 600 horsepower engines. To ensure clean fuel is pulled into the pump, two size of sock/filters are provided, a standard 11 square-inch design as well as a large, 35 square-inch version. Go Fuel in-tank modules are a direct fit into fuel tanks offered by TANKS Inc.
( 22 )
$150.00
—
$266.00
If your stock fuel pump just isn't adequate to give your car the juice it needs, Summit Racing™ inline fuel pumps deliver higher flow for a fraction of the cost. You can replace your stock fuel pump to OE dimensions but increase flow to facilitate higher horsepower. These pumps are available in a variety of size, pressure, flow rate, and finish options.
( 25 )
$109.99
—
$161.99
Aeromotive Phantom fuel systems are an industry game-changer! Order one of these Phantom fuel pump wiring kits to get yours up and running! They include all the necessary hardware and connectors to complete the installation. Features and notes for Aeromotive Phantom fuel pump wiring kits: * 20 ft. overall length for full-size vehicles * 30 amp 12 VDC automotive relay * 30 amp 12 VDC circuit breaker * 10-gauge fuel pump power/ground wire * 16-gauge trigger wire * Cable ties * Self-tapping mounting screws * Required tools include electrical terminal crimping tool, 5/16 in. nut driver, and electric drill
( 31 )
$178.75
On Sale
Holley Street Performance mechanical fuel pumps are designed to work with stock or mildly modified engines. Ranging in performance styles of 80 to 225 gph, their body castings can be rotated 360 degrees to ease mounting in difficult places and they have large orifices for high flow rates. These pumps are not compatible with methanol or alcohol fuels and should not be used with fuel injection systems. A fuel pressure regulator is required for 130 gph versions.
( 347 )
$249.95
$121.95
—
$249.95
Summit Racing™ electric fuel pumps are designed for consistent performance. Constructed of lightweight aluminum, these replacement pumps have 3/8 in. NPT ports and externally accessible pressure relief valves. They draw 4 amps or less at full load, and are available in different flow rates. Some models are compatible with flex fuel. A mounting bracket is included with each pump. Order the options preferred for your application.
( 249 )
$100.99
—
$137.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
