Availability
On Sale
Vortech supercharger systems for GM LS-Swaps operate at an even higher level of sophistication than any original equipment system. They're currently one of the most popular engine swap power plants in the world. In every application, the LS systems have established themselves to be fantastic platforms to swap into just about anything. They operate at an even higher level of sophistication, with a boost curve generated by Vortech's superchargers that are ideally matched with today's highly evolved engines and give you power when you need it. The supercharger and the technologically advanced subsystems fully integrate into the vehicle's existing platform, yielding a smooth continuity of power and performance.
( 3 )
$4,266.99
—
$6,935.99
$3,840.29
—
$6,242.39
Summit Bucks
Edelbrock E-Force universal supercharger systems are designed for engine swaps into street rods and muscle cars. They feature 12 in. long runners for maximum low-end torque and great drivability. They're capable of an incredible 600+ flywheel horsepower and 550+ lbs.-ft. of torque. If you're looking for a supercharger system for your hot rod to provide instantly reliable horsepower with low boost for minimum stress on your engine, look no further than an Edelbrock E-Force universal supercharger system—exactly what you need for your engine swap project. Order the model recommended for your year/make and engine application. Edelbrock E-Force universal supercharger systems include the following components: * Supercharger manifold assembly * Cast aluminum tensioner/idler bracket * Cast aluminum engine valley tray * Heavy-duty automatic belt tensioner * Dual, high-capacity, bar and plate, intercoolers * High-flow 95mm mass airflow sensor housing * Extruded aluminum fuel rails with -6 AN lines * Custom-molded intercooler hoses with quick-connect fittings * Electric intercooler water pump * Intercooler recovery tank * Fuel injectors * Steel idler pulleys with heavy-duty, high-speed bearings * High-flow conical air filter * Edelbrock aluminum engine covers * Plug and play, electrical harness, installation hardware * 3.5 in. supercharger pulley
Not Yet Reviewed
$7,400.95
—
$8,739.95
On Sale
Now you don't have to run a cumbersome roots-style supercharger on your vintage muscle. Vortech's carbureted centrifugal supercharger kits are designed to bring the performance and compact fit associated with late model fuel injected kits to vehicles equipped with carbureted engines. In most cases, these kits will fit under your stock hood without modifications. The heart of each kit is either a gear-driven V-1 S-Trim head unit or a gear-driven V-7 YSi-Trim head unit, unless otherwise noted. The cast aluminum carburetor enclosure assembly pressurizes the float bowls and throttle shafts for seamless response, and is designed for use with Holley 4150 or Demon 750 MD carburetors. The enclosure features front and rear -8 AN fuel inlet ports as well as provisions for pressure and vacuum connections. Linkage arms, a splined shaft, left/right hand spherical rod ends, and carburetor studs are included for simple throttle connection and adjustment. The included oil feed and oil drain assemblies deliver the best possible lubrication and cooling for the supercharger. They also feature a 6061-T6 billet aluminum supercharger crank pulley, pulley spacer, and an automatic belt tensioner.
( 1 )
$4,319.99
$3,887.99
On Sale
Vortech has a wide variety of supercharger kits available for many electronic fuel injected cars, trucks, and SUVs. Vortech kits come complete with everything that you need to install some serious horsepower. All systems come with the required fuel management components and a fuel pump, depending on the application. Also, all required hardware comes with the kits, including hoses, OEM connectors, ducts, fasteners, and tie wraps. Of course, the kits include complete instructions with plenty of diagrams, graphics, and photos to make your installation easy.
Not Yet Reviewed
$5,561.99
—
$7,282.99
$5,005.79
—
$6,554.69
On Sale
These Edelbrock Performer RPM Vortec intake manifold and carburetor kits are intended for small block Chevy engines fitted with either 1996 and later cast iron Vortec heads or Edelbrock's E-Tec aluminum heads. Performer RPM Vortecs are great for street rods, engine swaps, or industrial applications. They're also set up for either square-bore or spread-bore carburetors and produce power from 1,500 to 5,500 rpm. The kits include an 800 cfm Thunder Series AVS carburetor with an electric choke for easy drivability.
Not Yet Reviewed
$1,042.95
$834.36
On Sale
One of the most popular updates for an older vehicle is swapping out the carburetor for electronic fuel injection (EFI); but using an external pump to supply the high pressure needed for EFI can be a problem. External pumps are loud and often difficult to mount properly. Holley Sniper EFI conversion fuel tanks are the complete bolt-in solution for your EFI conversion. They're a direct-fit for a wide variety of specific applications, require no modifications, and include either a 255 lph or 400 lph submersible pump, a fuel level sender, and internal baffles. For the fuel you need with in-tank quietness, order a Holley Sniper EFI conversion fuel tank. Features include: * 255 lph model supports up to 550 hp * 400 lph model supports up to 750 hp * 60 psi at 13.5 V with a 10.4 amp draw * Made of coated, galvanized steel that is also silver powdercoated for corrosion protection * Fuel pump hanger assembly included * Sender has 1/4 in. NPT supply and return line ports for easy fuel line connection * Barbed vent fitting * Sending units have the correct ohm range for factory gauges * Fuel pump and sender are recessed into the tank * EFI-style tank baffling includes a 4.3L internal fuel tray to prevent starvation * Fits and looks like an OE tank when installed * Include new tank straps, where applicable
( 109 )
$875.95
$787.95
On Sale
Holley Sniper EFI fuel tank systems will complete your EFI swap. They fit and look like an OE tank, but each Sniper tank is a direct-fit for your application, which means no modifications for you to perform. The tanks are powdercoated galvanized steel for corrosion resistance and lasting good looks. Your Holley Sniper EFI fuel tank kit will include the tank, fuel pump, fuel level sender, and internal baffling. Some kits may also include filler neck and tank straps. Sniper EFI tanks feature: * Fuel pump (255 lph) with hanger assembly gives you the fuel you need with in-tank quietness * Sender has 1/4 in. NPT supply and return line ports for easy connection and a barbed vent fitting * Fuel level sender has the correct ohm range for your factory gauges * Fuel pump and sender are recessed in the tank to provide an easy installation * EFI-style tank baffling includes a large 4.3L internal fuel tray to prevent fuel pump starvation
( 23 )
$1,099.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
