Availability
On Sale
Holley USB cables are sealed against dirty environments. These connector cables are designed to fit select Holley EFI systems. If your system's ECU is mounted in not-so-clean areas, use Holley sealed USB cables.
( 73 )
$73.85
—
$84.59
$66.47
—
$76.13
ACDelco replacement fuel injectors help you to get maximum fuel efficiency and power from your engine. Properly operating fuel injectors are essential components for helping your vehicle run flawlessly. Replace any worn or faulty fuel injector with an OE-style model designed for your specific vehicle.
( 42 )
$51.50
—
$104.99
ACDelco GM Genuine Parts fuel injectors are an electro-magnetic valve that meters fuel into the engine's intake manifold or cylinders for combustion, and is a GM-recommended replacement for your vehicle's original component. The engine management computer operates the injector by applying an electric current to the injector solenoid winding—this causes the needle valve to open, and allows the pressurized fuel to be atomized into the intake airstream. These original equipment fuel injectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors. They are also offered in kits with the necessary parts, such as seals, clamps, and spacer.
( 5 )
$51.99
—
$106.99
Our lightweight Summit Racing™ fuel rail kits fit like stock, but deliver the increased fuel volume that your LS1 needs for maximum performance. The 3/4 in. i.d. rails are precision CNC-machined from high-strength aluminum with a great looking, black anodized finish. The kits include fittings with Viton® O-rings for a superior seal, mounting brackets, and stainless steel hardware.
( 38 )
$104.99
—
$114.99
On Sale
Holley EFI Terminator X fuel injectors feature a precision lapped disc valve, high-quality brass windings, and high-temperature O-rings. These injectors provide excellent linearity with no discernible "bounce" at low pulse widths as commonly found in other injectors. With a wide variety of fuel flow offerings from 42 lb./hr. to 220 lb./hr. you are sure to find an injector that matches your non-emissions-controlled application. Holley EFI Terminator X fuel injectors can also be used with any ECU that utilize high-impedance fuel injector drivers. Features: * PICO/EV6-style performance injectors are sold individually or in a set of 8 * High impedance for use with saturated drivers * Rated injector flow 220 lb./hr. at 43 psi of base fuel pressure * USCAR injector connector * 40mm O-ring to O-ring length * Compatible with many OEM LS intake manifolds * Easy to install in any Holley EFI Hi-Ram intake, using Holley fuel rail adapter kit
( 26 )
$63.09
—
$108.95
$56.78
—
$98.05
Holley Commander 950 air temperature sensors are designed as direct replacements for those in your Commander 950 fuel injection system. They screw into the intake plenum.
( 10 )
$52.75
Add Delphi fuel injection idle air control valves to control the airflow into your engine. Delphi OE replacement valves provide a superior fit and finish that result in an easier installation for you. Their idle air control valves meet federal emissions regulations, increase your fuel efficiency, and eliminate the potential for malfunctions. Get control over the amount of air allowed to flow into your engine, and your engine idle speed, in a variety of load conditions when you replace your air control valves with Delphi fuel injection idle air control valves.
( 33 )
$50.99
—
$102.99
Standard Motor Products fuel injectors help you attain maximum fuel efficiency and power from your engine. Properly operating injectors are essential components for enabling your vehicle to run flawlessly. These OEM stock replacements are available for hundreds of specific applications. Don't drive with faulty fuel delivery. Update worn or malfunctioning fuel injectors with reliable models from Standard Motor Products.
( 241 )
$50.99
—
$112.99
Holley replacement idle air control motors will fit your Holley and Sniper fuel injection systems without any modifications. Designed to be plug-and-play for easy replacement and like-new operation. Order the correct valve for your application today.
( 24 )
$80.19
—
$90.75
Delphi fuel injectors are engineered with an accurate, controlled spray pattern that reduces emissions and improves cold-start capabilities. These replacement injectors have a recessed fuel exit and no internal seal rings—in order to minimize leakage and possible puddling. Delphi fuel injectors are durable, dependable, and offered for a wide variety of applications. Order the OEM stock replacements designed for your vehicle.
( 9 )
$52.99
—
$102.99
On Sale
Holley main power ignition harnesses are designed for use with your Holly EFI systems. These wiring harnesses work with other Holley components to correctly configure your EFI system.
( 1 )
$90.75
$81.68
These FAST fuel rail lines are designed to connect your FAST fuel rails to your fuel source or an additional fuel rail. They are manufactured using stainless steel braided hose and black anodized -6 AN aluminum female fittings. The lines have the fittings pre-crimped, making them easy to install with no fuel rail modifications necessary.
( 8 )
$55.95
—
$73.95
ACDelco GM Genuine Parts fuel injection throttle bodies are GM-recommended replacements for your vehicle's original component. It is located on the intake manifold, and contains the throttle plate(s) that control the air entering the engine. The throttle body also houses the fuel injector(s) on Throttle Body Injection (TBI) or Central Fuel Injection (CFI) systems. These true OE fuel injection throttle bodies have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
( 35 )
$59.99
—
$99.99
Holley Terminator X wideband adapter harnesses are intended to be used as service components for your Terminator X EFI installation. The Terminator X ECU (electronic control unit) features real-time fuel learn, high impedance injector drivers, an integrated 1bar MAP sensor, and 4 programmable inputs and outputs. The inputs and outputs are ideal for electric fans, boost control solenoids, or progressive nitrous control. The Terminator X Max ECU features real-time fuel learn, high impedance injector drivers, an integrated 1bar MAP sensor, electronic transmission control, drive-by-wire throttle body control, and 4 programmable inputs and outputs. The inputs and outputs are ideal for electric fans, boost control solenoids, progressive nitrous control, and much more. This is the wideband adapter harness only.
( 1 )
$57.35
On Sale
Holley J1A/B Dominator auxiliary wiring harnesses are designed to connect into the main harness input/ouput connector. They feature loose lead wires on one end and an 8-pin Metri-Pack connector on the other.
( 3 )
$110.95
$99.85
ICT Billet fuel injector plug adapters are plug-and-play connections which need no wiring. The sets include eight adapters to connect different fuel injectors to various wiring harnesses. Order the adapters designed for your particular application.
( 16 )
$76.99
Automobile engines are a perfect balance of science and mechanical engineering. Each part is designed to interact with the other in perfect harmony to produce a means of transportation. One very small, but very vital component found in this mass orchestra of mechanics is the idle air control valve, or better known to mechanics as the IAC. Edelbrock offers their version, the GM stepper IAC motors, that also includes a valve gasket. The IAC valves adjust the airflow to improve motor idling. The gasket provides a tight seal to avoid a leaky throttle system, which could be a nuisance and also dangerous.
( 1 )
$118.95
Motorcraft replacement fuel injectors help you to get maximum fuel efficiency and power from your engine. Properly operating fuel injectors are essential components for flawless performance. Replace your vehicle's worn or malfunctioning fuel injector with a reliable new OEM model from Motorcraft. Order the part designed for your specific application.
( 23 )
$50.99
—
$111.99
BTR offers fuel rail kits for its V2 Trinity intake manifolds. The fuel rails incorporate enhanced injector angles for better part throttle drivability and top-end horsepower when combined with your V2 Trinity intake manifold. These Brian Tooley Racing products are designed for a variety of Chevy engine applications from the 1990s and up.
( 3 )
$99.99
On Sale
Holley offers a variety of direct replacement EFI wiring harnesses, including multi-port, sequential, and throttle body injection styles. These units are made with premium components to ensure better reliability and performance for your ride--and they're compatible with many engine swaps. Holley EFI systems wiring harnesses are sold individually or as a kit; choose the model needed for your fuel injection application.
( 31 )
$91.79
—
$110.95
$82.61
—
$99.85
On Sale
Holley Sniper EFI input/output wiring harnesses give you the access to two ground trigger inputs and three ground trigger outputs. These harnesses also include the points output, tachometer output, and digital gauge output wires. The input grounds can be used for things, such as A/C kick-on and nitrous stage activation! The output grounds can be used for electronic fan control, or A/C shutdown at wide open throttle. Features: * Wires are individually labeled for easy identification * Two 3 ft. long inputs wires * One 3 ft. long output wire * Two 5 ft. long output wires * One 5 ft. tachometer output * One 3 ft. points output wire * One 5 ft. long digital gauge output for Holley EFI analog gauges
Not Yet Reviewed
$59.15
$53.24
On Sale
Holley throttle body angle adapters resolve problems. The considerable angle of the LT intakes can cause issues routing inlet plumbing and clearance to aftermarket accessory brackets. These adapters level the throttle body for swap applications without changing the flow the GM design intended. Other four-bolt intakes with routing issues can also benefit from this adapter. Features and benefits of Holley throttle body angle adapters: * Billet aluminum construction * Maintains proper throttle body blade orientation * Eliminates drivability issues associated with inverting the throttle body * Allows clearance to aftermarket accessory brackets or other clearance and routing issues * No harness rerouting or extending required * Works with both truck and car LT intake bolt patterns * Works with all 4-bolt LS intake bolt patterns * Works with up to 95mm intakes and throttle body openings * Works with common LS and LT 104 x 70mm bolt pattern throttle bodies * Adapts common LS 104 x 70mm bolt pattern throttle bodies to LT 5.3L truck intakes * Works with Holley 92/95mm Hi-Ram and Mid-Ram intakes * Allows use of cable-operated and other throttle bodies on Gen V 5.3L intakes
( 5 )
$78.61
—
$96.25
$70.75
—
$86.63
Beck/Arnley fuel injectors are available for a variety of applications, particularly import and late model vehicles. These replacements are manufactured within OE-specified flow rates to ensure optimum performance and quality. Don't be slowed by faulty injectors. Order the model designed for your year/make/model.
( 5 )
$50.99
—
$105.99
On Sale
Holley Sniper EFI fuel injectors provide excellent linearity with no discernible "bounce" at low pulse widths, as commonly found in other injectors. They feature a precision-lapped disc valve, high-quality brass windings, and high-temperature O-rings. Order a set of eight Holley Sniper EFI performance fuel injectors for use with your Holley EFI intake manifold. Features: * PICO/EV6-style performance injectors * High impedance (12.2 ohms) for use with saturated drivers * Rated injector flow: 36 lbs./hr. at 43 psi * Supports up to 575 hp (maximum) * Tri-cone spray pattern * Not intended as service injectors for Sniper EFI TBI product line
( 1 )
$79.75
$71.78
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
