Availability
On Sale
Do you need to refurbish your tired Holley carburetor? A Holley Renew kit brings your carb back to original specs and like-new condition! These carburetor Renew kits from Holley come complete with all of the necessary gaskets, O-rings, pump diaphragm(s), needle and seat(s), power valve(s), detailed instructions, and hardware for a complete rebuild. When a Renew is in order, trust Holley to do it right!
( 572 )
$97.25
$51.17
—
$95.99
On Sale
Holley USB cables are sealed against dirty environments. These connector cables are designed to fit select Holley EFI systems. If your system's ECU is mounted in not-so-clean areas, use Holley sealed USB cables.
( 73 )
$73.85
—
$84.59
$66.47
—
$76.13
On Sale
Holley Mighty Mite electric fuel pumps are small in size, but BIG on performance! They are quiet, easy to install, and work with gas, diesel, blended alcohol, and E85. The pumps use a standard 12 V power source; while a reliable solid-state design provides longer life. Mighty Mites have a simple 2-wire hookup, are self-priming and regulating, and deliver super-quiet operation at only 65 dB! They are 12 in. dry lift capable and great for carbureted trucks, cars, generators, and agricultural equipment. You can also use them as transfer pumps!
( 233 )
$68.25
—
$78.61
$61.43
—
$70.75
On Sale
Holley gasoline carburetor jet assortment kits are the professional way to track-tune your Holley carburetor for top performance. They consist of two each in different jet sizes. The jets are contained in either a plastic case or aluminum plate that are designed to keep them separated and make them easily accessible.
( 102 )
$88.95
$53.78
—
$80.06
On Sale
Holley EFI GM-style fuel filters have a built-in regulator to provide a simple and clean means to fueling your LS swap. Available with OEM-style or -6AN connections, they feature an internal regulator set at 58 psi, along with an integrated 5 nominal micron rated filter. The bypass design allows you to run one inlet with one outlet to the engine, and a return outlet back to the tank. Holley EFI fuel filter regulators are ideal when performing a LS engine swap or any other fuel injection swap that is designed to run at 58 psi of static pressure. Choose the fuel filter/regulator with the proper connections for your vehicle. Features: * All stainless-steel construction for improved corrosion resistance * Designed with one inlet, one outlet, and one return * Fixed pressure at 58 psi * Nominal micron rating: 5 * Can be used with other EFI systems that require 58 psi * Not recommended with fuel pumps that flow over 450 lph * Return line required for proper regulator operation
( 7 )
$68.25
$61.43
On Sale
Holley HP billet fuel filters are precision CNC-machined from 6061-T6 billet aluminum for maximum strength and durability. They feature a black bright dip anodized body and clear bright dip anodized ends for superior corrosion resistance and good looks. Holley HP billet fuel filters are available in a variety of configurations in 100 or 175 gph and 10, 40, and 100 micron ratings.
( 60 )
$113.95
$102.55
On Sale
Holley EFI Terminator X fuel injectors feature a precision lapped disc valve, high-quality brass windings, and high-temperature O-rings. These injectors provide excellent linearity with no discernible "bounce" at low pulse widths as commonly found in other injectors. With a wide variety of fuel flow offerings from 42 lb./hr. to 220 lb./hr. you are sure to find an injector that matches your non-emissions-controlled application. Holley EFI Terminator X fuel injectors can also be used with any ECU that utilize high-impedance fuel injector drivers. Features: * PICO/EV6-style performance injectors are sold individually or in a set of 8 * High impedance for use with saturated drivers * Rated injector flow 220 lb./hr. at 43 psi of base fuel pressure * USCAR injector connector * 40mm O-ring to O-ring length * Compatible with many OEM LS intake manifolds * Easy to install in any Holley EFI Hi-Ram intake, using Holley fuel rail adapter kit
( 26 )
$63.09
—
$108.95
$56.78
—
$98.05
Holley Commander 950 air temperature sensors are designed as direct replacements for those in your Commander 950 fuel injection system. They screw into the intake plenum.
( 10 )
$52.75
Holley replacement idle air control motors will fit your Holley and Sniper fuel injection systems without any modifications. Designed to be plug-and-play for easy replacement and like-new operation. Order the correct valve for your application today.
( 24 )
$80.19
—
$90.75
On Sale
Holley adjustable fuel injection regulators are able to provide all of the fuel pressure that your high performance, fuel injected vehicle will require. They utilize a special wave spring to maintain constant fuel pressure. Some models are universal fit, while others are designed for specific vehicle applications. The regulators are available for inline or fuel rail mount, with various psi ranges. Select the adjustable unit tailored to your driving needs.
( 22 )
$85.95
$77.36
On Sale
Holley main power ignition harnesses are designed for use with your Holly EFI systems. These wiring harnesses work with other Holley components to correctly configure your EFI system.
( 1 )
$90.75
$81.68
On Sale
Holley electric choke conversion kits can be used to convert Holley carburetors originally equipped with either a hot air or hand-operated choke into a fully automatic operation.
( 117 )
$86.39
—
$104.95
$77.75
—
$94.45
Holley Terminator X wideband adapter harnesses are intended to be used as service components for your Terminator X EFI installation. The Terminator X ECU (electronic control unit) features real-time fuel learn, high impedance injector drivers, an integrated 1bar MAP sensor, and 4 programmable inputs and outputs. The inputs and outputs are ideal for electric fans, boost control solenoids, or progressive nitrous control. The Terminator X Max ECU features real-time fuel learn, high impedance injector drivers, an integrated 1bar MAP sensor, electronic transmission control, drive-by-wire throttle body control, and 4 programmable inputs and outputs. The inputs and outputs are ideal for electric fans, boost control solenoids, progressive nitrous control, and much more. This is the wideband adapter harness only.
( 1 )
$57.35
On Sale
Holley carburetor accelerator pump conversion kits offer instantaneous response to pull strongly through the rpm band! A must for tunnel ram setups, these kits are ideal for those who demand ultimate performance from their Holley carbs. These kits increase fuel capacity and eliminate flat spots off idle, or at any other rpm range. These kits include everything required for an easy installation including a new pump housing, stud, arm, diaphragm, spring, and longer pump housing screws.
( 48 )
$78.61
—
$88.55
$70.75
—
$79.70
On Sale
Holley J1A/B Dominator auxiliary wiring harnesses are designed to connect into the main harness input/ouput connector. They feature loose lead wires on one end and an 8-pin Metri-Pack connector on the other.
( 3 )
$110.95
$99.85
On Sale
The 14 in. x 3 in. Holley chrome air cleaner assemblies add a touch of class and style to your street/strip machine. They use the Power Shot filter, which outperforms the competition. They also provide more horsepower and torque, while offering maximum protection for your engine.
( 17 )
$113.95
$102.55
On Sale
Holley Fast Kits include the most commonly replaced parts you'll need to bring your Holley carb back to its original condition. Each kit contains genuine Holley service parts, explicit step-by-step instructions, a detailed tuning guide, and a package that serves as a handy parts tray--all at an affordable price.
( 124 )
$59.09
—
$92.45
$53.18
—
$83.21
On Sale
Fine-tune your vehicle with Holley carburetor spacers. These carburetor spacers will help you improve torque and increase horsepower. They offer several applications to fit your needs and come available in phenolic and billet or cast aluminum.
( 47 )
$71.69
—
$111.95
$64.52
—
$100.75
On Sale
Holley offers a variety of direct replacement EFI wiring harnesses, including multi-port, sequential, and throttle body injection styles. These units are made with premium components to ensure better reliability and performance for your ride--and they're compatible with many engine swaps. Holley EFI systems wiring harnesses are sold individually or as a kit; choose the model needed for your fuel injection application.
( 31 )
$91.79
—
$110.95
$82.61
—
$99.85
On Sale
Holley Sniper EFI input/output wiring harnesses give you the access to two ground trigger inputs and three ground trigger outputs. These harnesses also include the points output, tachometer output, and digital gauge output wires. The input grounds can be used for things, such as A/C kick-on and nitrous stage activation! The output grounds can be used for electronic fan control, or A/C shutdown at wide open throttle. Features: * Wires are individually labeled for easy identification * Two 3 ft. long inputs wires * One 3 ft. long output wire * Two 5 ft. long output wires * One 5 ft. tachometer output * One 3 ft. points output wire * One 5 ft. long digital gauge output for Holley EFI analog gauges
Not Yet Reviewed
$59.15
$53.24
On Sale
Holley billet throttle return spring brackets are designed for use with several models of carburetors (not for use with Sniper EFI models) and feature clear or black anodized finishes. These are brackets with no throttle cable or kick-down mounts. Order the Holley billet throttle return spring brackets that best fits your application.
( 19 )
$78.95
—
$84.25
$71.06
—
$75.83
On Sale
Holley throttle body angle adapters resolve problems. The considerable angle of the LT intakes can cause issues routing inlet plumbing and clearance to aftermarket accessory brackets. These adapters level the throttle body for swap applications without changing the flow the GM design intended. Other four-bolt intakes with routing issues can also benefit from this adapter. Features and benefits of Holley throttle body angle adapters: * Billet aluminum construction * Maintains proper throttle body blade orientation * Eliminates drivability issues associated with inverting the throttle body * Allows clearance to aftermarket accessory brackets or other clearance and routing issues * No harness rerouting or extending required * Works with both truck and car LT intake bolt patterns * Works with all 4-bolt LS intake bolt patterns * Works with up to 95mm intakes and throttle body openings * Works with common LS and LT 104 x 70mm bolt pattern throttle bodies * Adapts common LS 104 x 70mm bolt pattern throttle bodies to LT 5.3L truck intakes * Works with Holley 92/95mm Hi-Ram and Mid-Ram intakes * Allows use of cable-operated and other throttle bodies on Gen V 5.3L intakes
( 5 )
$78.61
—
$96.25
$70.75
—
$86.63
On Sale
Do you need to refurbish your Holley remanufactured carburetor? A Holley remanufactured kit brings your carb back to original specs and like-new condition! These remanufactured carburetor Renew kits from Holley come complete with all of the necessary gaskets, O-rings, pump diaphragm(s), needle and seat(s), power valve(s), detailed instructions, and hardware for a complete rebuild. When a Renew is in order, trust Holley to do it right!
( 23 )
$62.15
—
$81.85
$55.94
—
$73.67
On Sale
Holley Sniper EFI fuel injectors provide excellent linearity with no discernible "bounce" at low pulse widths, as commonly found in other injectors. They feature a precision-lapped disc valve, high-quality brass windings, and high-temperature O-rings. Order a set of eight Holley Sniper EFI performance fuel injectors for use with your Holley EFI intake manifold. Features: * PICO/EV6-style performance injectors * High impedance (12.2 ohms) for use with saturated drivers * Rated injector flow: 36 lbs./hr. at 43 psi * Supports up to 575 hp (maximum) * Tri-cone spray pattern * Not intended as service injectors for Sniper EFI TBI product line
( 1 )
$79.75
$71.78
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
