Availability
Showing In Stock Items. Show All 22 Items.
Nitrous Express throttle position activation switches are more durable and contain short circuit protection not found in other similar products. Constructed to work with most EFI vehicles, these switches are designed to trigger a relay at 1/2 amp max current draw, at or near wide open throttle.
( 7 )
$52.87
Nitrous Express offers a full range of switches and electronics for your nitrous system. These wide-open throttle switches are designed to be mounted underneath your gas pedal that releases the nitrous when you go to wide-open throttle.
( 13 )
$24.73
—
$44.94
Philadelphia Racing Products micro switch mounting brackets are crafted from lightweight billet aluminum. Providing a precision fit to your carburetor for precise activation of the micro switch, the brackets work with both standard and throttle adjustment-screw secondary arms. PRP offers the unique brackets individually or with a micro switch. They come complete with stainless steel mounting hardware for the micro switch, as well as for mounting the bracket.
( 2 )
$31.79
—
$32.79
Nitrous Express activation switch brackets are made of high-quality steel and have a natural finish for long-lasting performance and durability. They include a universal wide-open throttle switch bracket and mounting hardware. If you're looking for high-quality brackets, look no further than Nitrous Express.
( 7 )
$52.87
Holley nitrous activation microswitch brackets are designed to bolt directly to your Holley Ultra HP carburetor and hold a nitrous activation microswitch. They will activate the microswitch upon contact with the secondary idle adjustment screw. These Holley microswitch brackets are made from durable steel and then black powdercoated for protection.
( 4 )
$26.61
Activate your nitrous system with ZEX wide-open throttle microswitches. These microswitches offer a safe way to trigger your nitrous when WOT is obtained. Practice nitrous safety with ZEX wide-open throttle microswitches.
( 3 )
$20.95
Activate your nitrous system with FAST wide-open throttle microswitches. These microswitches offer a safe way to trigger your nitrous when WOT is obtained. Practice nitrous safety with FAST wide-open throttle microswitches.
Not Yet Reviewed
$20.95
Clearance
Dorman EGR vacuum switching valves are designed to inhibit EGR operation during conditions where it could adversely affect engine performance and vehicle drivability. They can be either normally open or closed and installed in series between the vacuum modulator and EGR valve, or installed on a second port on the EGR valve. Dorman EGR vacuum switching valves control an atmospheric bleed, which inhibits EGR operation any time a given set of ECM parameters is met.
( 2 )
$56.99
$36.95
—
$42.50
Mount your solenoid/wide open throttle switch with these brackets from FAST. Designed for use with FAST solenoids, these mild steel brackets will help ensure a proper installation.
Not Yet Reviewed
$22.95
On Sale
Holley accelerator pump discharge nozzles are invaluable when it comes time to tune your accelerator pump system. By keeping a good selection on hand, you can effectively adjust the rate of fuel delivered to your engine by switching back and forth between nozzle sizes.
( 158 )
$44.53
$21.74
—
$46.61
On Sale
Holley Sniper EFI dual sync distributor adapter harnesses ensure your Sniper EFI ignition installation is a snap. Simply plug up both connectors, terminate the pink wire to a switched 12 V ignition source, and you're finished.
Not Yet Reviewed
$46.86
$42.17
Holley Sniper EFI HyperSpark CD ignition box wiring harnesses plug-and-play with existing HyperSpark installations, or Sniper EFI HyperSpark main harnesses. They can also be used as replacements for Sniper EFI Hyperspark and Hyperspark 2 ignition boxes. Sniper EFI HyperSpark CD ignition box service harnesses include the switched 12 V power, main battery power and ground, ignition coil, and points or electronic ignition amplifier output wires. Each harness is wrapped in black split wire loom to keep the wires protected and your engine bay clean.
Not Yet Reviewed
$33.63
When you're switching to an electric fuel pump, CVR fuel pump block-off plates block off the unused port in your engine block where the mechanical pump used to be. These billet aluminum block-off plates are offered in a variety of anodized finishes to complement and coordinate with your engine bay accessories. CVR fuel pump block-off plates come complete with a gasket and stainless steel bolts for an easy installation.
( 39 )
$25.99
Are you switching to an electric fuel pump? If so, then you're going to need one of these Canton Racing billet aluminum mechanical fuel pump block-off plates. They are designed to block off the fuel pump opening whenever a mechanical fuel pump is not used. The plates are manufactured from 1/4 in. billet aluminum and feature a durable, long lasting finish. Canton Racing billet aluminum mechanical fuel pump block-off plates are also available with a welded-on -10 AN male fitting that allows a vacuum pump or drainback valve to be connected.
( 25 )
$32.00
Vibrant Performance turbo adapter kits transition your setup from a 4-bolt to V-band. With precision laser-cut and CNC-machined pieces, these kits allow you to make the switch with rust-free, warp-free T304 stainless steel. Vibrant turbo adapter kits include: * 3 in. female V-band flange * 3 in. 4-bolt flange * V-band clamp * Hardware, which includes four nuts and four bolts
Not Yet Reviewed
$39.99
On Sale
Nitrous Outlet fuel rail distribution blocks are machined from billet aluminum and are specifically designed to neatly tie into your fuel system. In addition to supplying fuel to your wet system's fuel solenoid, the units also feature 1/8 in. NPT accessory ports for the installation of a pressure gauge or pressure safety switch. They easily connect to the OEM Schrader valve and are black anodized for lasting good looks.
Not Yet Reviewed
$27.99
$23.79
Motion Pro standard black vinyl throttle cables are designed to meet or exceed OE quality. These black vinyl cables feature a coil wound housing and an inner nylon sleeve for longer life and smooth operation. They are available in a wide variety of applications.
( 3 )
$40.69
—
$44.79
Carter inline electric fuel pumps are quality replacements to deliver fuel at the precise pressure and flow rate your vehicle demands. With a low amp draw, high free-flow, and consistent fuel pressure, these pumps will keep your engine well-fed. Universal and vehicle-specific models are available.
( 80 )
$51.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
