Availability
COBB Tuning front mount intercooler kits replace your overworked stock units to deliver a drastic increase in cooling and power, especially when paired with tuning from Accessport (not included). Available for several applications, most of these kits feature larger cores with efficient bar and plate designs and cast aluminum end tanks, piping, and more (depending on your application). Escalating intake air temperatures under the hood can overwhelm your factory FMIC with heatsoak and take away power. Put one of these COBB Tuning front mount intercooler kits near the top of your modification list and make your car come alive with new found colder air charge.
Not Yet Reviewed
$1,565.00
—
$1,750.00
Aeromotive Eliminator brushless variable speed in-tank fuel pumps provide multiple mounting options in almost any fuel cell or tank. Designed for the custom tank builder or fabricator, these True Variable Speed (TVS) units offer the advantage of pump speed control via a 0-5 V analog DC input signal. The Eliminator in-tank fuel pump assemblies are constructed for cool and quiet operation. Order the model that's compatible with your application.
Not Yet Reviewed
$1,539.50
—
$1,690.15
On Sale
FUELAB Titanium fuel cell quick-service surge tanks (QSST) come base as a "bare" unit without a lift pump and with an empty fuel pump hanger in the surge tank. (FUELLAB has options to add three different lift pumps, five different surge pumps, remote fuel fill, fuel level sensor, and a fuel tank vent kit.) Quick-service surge tanks are compatible with both brushed or brushless lift and surge pump options. Product features: * Quick Service Surge Tank for fast pump service * Provides protection against fuel slosh from standard fuel cell pump hangers * Fits the industry standard 24-bolt fill plate bolt pattern * Gasoline, Ethanol (E85), and Methanol compatible * Rollover flap protection * Fuel tank vent with rollover protection * Gaskets and hardware included * Stock with empty fill neck hole to give you options * WHAT MAKES THE FUELAB QSST BETTER? FUELAB's Quick Service Surge Tank is exactly that. You can service your Surge Tank Pumps in minutes. With only 10 bolts on top, you can pull the Surge Tank Pump Hanger out of the top of the cell and service your pumps quickly! Whereas most competitors require you to pull the entire 24 bolt plate, then remove the surge tank housing from the bottom to finally access your pumps. FUELAB units are compatible with Brushed and Brushless pumps for both the Lift Pump and the Surge Tank Pump(s), or a combination of the two using the same Base Plate. Base plates come standard in two enticing anodized colors, Titanium and Gold. Kit includes: * FUELAB QSST base plate and surge tank * Fuel tank vent with rollover protection * Lift pump hanger with pump mount * 3-Terminal for option of brushed or brushless lift pump * Fuel level sender block-off plate and gasket * Open fuel filler hole for customization (gasket included) * Empty dual pump fuel surge tank hanger (fits brushed or brushless pumps) * Corrugated fuel hose for lift pump into surge tank * 1/4 in.-28 hardware to mount to most fuel cell nut rings (NOTE: Don't forget to add on your FUELAB Fuel Filler Kit, Fuel Level Sender, and Fuel Cell Vent Kit!)
Not Yet Reviewed
$1,800.00
—
$2,412.00
$1,620.00
—
$2,170.80
On Sale
Does your engine seem like it's always out of breath? Give it a new lease on life and gain some horsepower with Holley high--flow EFI throttle bodies. Made from CNC billet aluminum, they're designed to use the stock TPS and IAC to simplify installation. They include all vacuum ports and linkage required for installation.
( 1 )
$1,749.95
$1,573.95
Maximize your ride's performance with a Mishimoto intercooler! These high performance intercoolers significantly lower air intake temperatures, while safely increasing horsepower for small and large turbo applications. Constructed from 6061 aluminum and precision TIG-welded, Mishimoto intercoolers feature sleek styling in a choice of colors for the ultimate in good looks. Whether you want to show it off or go with the popular sleeper look, Mishimoto makes an intercooler to give your engine--and your style--a boost!
( 2 )
$1,565.95
—
$2,055.95
S&B Filters fuel tanks maximize the space under your diesel truck and empower you to fly by more gas stations like a compact, fuel-efficient car. The folks at S&B know even lifted trucks often sacrifice clearance for larger holds. That's why they design their tanks with a contour around the driveshaft area, helping you maximize clearance. A transfer pump fitting allows you to pull fuel from your now larger tank for equipment—saving valuable space in your truck's bed. Spend less time at the pump and more time driving with the S&B high-capacity replacement fuel tank designed to fit your vehicle. Features, items, and specs: * Brass vent and rollover vent valve * Included baffles cut down on fuel sloshing * Integrated fuel sump for aftermarket fuel pumps * Integrated OEM-style fitting for sending unit installation ease * Front cradle support design (instead of a band that wraps under) to help avoid band debris damage and failure where it's most likely to occur * Front support skid plate on some models * No modifications necessary for installation
( 5 )
$1,549.00
On Sale
FiTech Go Port EFI complete fuel injection systems are offered in two kits, one for up to 550 hp and one for up to 1,050 hp. Each system is supplied with a new aluminum intake machined and fitted with injectors (36 or 80 lb.), fuel rails, wiring harness, and an 850 cfm throttle body. The ECU, with its high-speed processor, is integral to the throttle body along with the TPS, IAC, IAT and MAP sensors reducing wiring and making installation as easy as possible. All setup is handled through the color touch screen monitor with no tuning experience necessary to have your engine ¬rev up and running at its best. Choose the system designed for your engine.
( 3 )
$2,064.00
$1,857.60
Wagner Tuning competition intercoolers replace your OEM unit with performance gains and low intake temperatures. Optimized by CAD, most feature lightweight, low restriction tube and fin construction, with a competition high-speed core and cast aluminum end tanks to give these intercoolers excellent cooling properties with less pressure drop. The design was improved further with flow analyses and simulations. Wagner Tuning competition intercoolers deliver an easy fitment and maximized cooling. They are treated with a protective anti-corrosion coating with perfect thermal heat-dissipating characteristics. Order the model designed for your vehicle application.
Not Yet Reviewed
$1,590.00
—
$1,940.00
Separate and specific, a setup just for your nitrous--dedicated fuel systems from Nitrous Outlet. A fuel enrichment system devoted to your nitrous removes the strain from your vehicle's stock system and gives you more control. These dedicated setups come with custom-built, lightweight, high-density plastic or heavy-duty, hand-welded aluminum fuel cells. A fuel pump, regulator, hose, fuel lines, and fittings complete the systems. Just about all of them are compatible with high or low fuel pressure by changing a spring inside of the fuel regulator, and they require no modifications to install. Create a distinct setup for your nitrous with Nitrous Outlet dedicated fuel systems.
( 1 )
$1,515.99
—
$1,782.99
Mishimoto intercooler and pipe kits let your engine breathe in the coolest, densest air possible to help improve performance and overall efficiency of heat dissipation, along with being strong enough to handle just about anything. Mishimoto performance intercoolers offer increased core volume and fin surface area, which results in increased flow, reduced outlet temperatures, and the ability to generate gains in horsepower and torque. Intercoolers are available in black or silver. Pipes are available polished or with a black powdercoat. As with all their products, the Mishimoto intercooler and pipe kits are backed by their signature Mishimoto Lifetime Warranty.
Not Yet Reviewed
$1,600.95
—
$2,178.95
Strike a blow for performance with Nitrous Outlet 4150 GENIII Stinger race plate systems. These nitrous systems feature large unique cone-shaped "stingers" that sit further down inside the intake plane with 16 discharge ports—eight for nitrous and eight for fuel. Their 360 degree pattern completely saturates the air intake charge for even distribution. Stinger race plates are CNC-machined from 6061 billet aluminum, and have black anodized bodies, red anodized "stingers," and are CNC-engraved with the Nitrous Outlet logo and fuel/nitrous ports. The assembly includes pre-fabricated hard lines, solenoid, brackets, jetting, harness, and hardware—everything you need to spray 50 to 600 hp. Pierce your nitrous system with the sharp performance of Nitrous Outlet 4150 GENIII Stinger race systems.
( 1 )
$1,526.99
Bitten by performance! Nitrous Outlet 4500 GENIII Stinger race nitrous oxide plate systems include everything you need to spray 50-600 hp. They feature plates with unique, extended reach, cone-shaped "stingers" with many discharge ports for fuel and nitrous. The design covers a 360 degree pattern that completely saturates the air intake charge for precise, even atomization. These plates are CNC-machined from 6061 billet aluminum with black anodized bodies and red anodized stingers—as well as being engraved with Nitrous Outlet logo and fuel/nitrous ports. Sharpen your track performance with a Nitrous Outlet 4500 GENIII Stinger race nitrous oxide plate system.
Not Yet Reviewed
$1,501.99
—
$1,539.99
Aeromotive 3.5 gpm brushless variable speed in-tank gear pumps provide multiple mounting options in almost any fuel cell or tank. Designed for the custom tank builder or fabricator, these units offer the advantage of pump speed control via a 0-5 V analog DC input signal. The 3.5 gpm in-tank fuel pump assemblies are constructed for cool and quiet operation. Order the model that's compatible with your application.
Not Yet Reviewed
$1,863.60
—
$2,058.30
On Sale
FUELAB Gold fuel cell quick-service surge tanks (QSST) come base as a "bare" unit without a lift pump and with an empty fuel pump hanger in the surge tank. (FUELLAB has options to add three different lift pumps, five different surge pumps, remote fuel fill, fuel level sensor, and a fuel tank vent kit.) Quick-service surge tanks are compatible with both brushed or brushless lift and surge pump options. Product features: * Quick Service Surge Tank for fast pump service * Provides protection against fuel slosh from standard fuel cell pump hangers * Fits the industry standard 24-bolt fill plate bolt pattern * Gasoline, Ethanol (E85), and Methanol compatible * Rollover flap protection * Fuel tank vent with rollover protection * Gaskets and hardware included * Stock with empty fill neck hole to give you options * WHAT MAKES THE FUELAB QSST BETTER? FUELAB's Quick Service Surge Tank is exactly that. You can service your Surge Tank Pumps in minutes. With only 10 bolts on top, you can pull the Surge Tank Pump Hanger out of the top of the cell and service your pumps quickly! Whereas most competitors require you to pull the entire 24 bolt plate, then remove the surge tank housing from the bottom to finally access your pumps. FUELAB units are compatible with Brushed and Brushless pumps for both the Lift Pump and the Surge Tank Pump(s), or a combination of the two using the same Base Plate. Base plates come standard in two enticing anodized colors, Titanium and Gold. Kit includes: * FUELAB QSST base plate and surge tank * Fuel tank vent with rollover protection * Lift pump hanger with pump mount * 3-Terminal for option of brushed or brushless lift pump * Fuel level sender block-off plate and gasket * Open fuel filler hole for customization (gasket included) * Empty dual pump fuel surge tank hanger (fits brushed or brushless pumps) * Corrugated fuel hose for lift pump into surge tank (NOTE: Don't forget to add on your FUELAB Fuel Filler Kit, Fuel Level Sender, and Fuel Cell Vent Kit!)
Not Yet Reviewed
$1,800.00
—
$2,412.00
$1,620.00
—
$2,170.80
Detroit Speed narrowed fuel tanks are crafted from stainless steel for use with stock applications or Detroit Speed mini-tub kits. Available for a variety of classic applications, they are direct bolt-ins utilizing the original mounting locations. Able to work for both carbureted and fuel injected applications, Detroit Speed tanks are pressure-tested, TIG-welded, and fitted with an internal fuel tray and in-tank baffling. They feature NPT pickup and return fittings that are compatible with AN fuel lines and include provisions for an in-tank fuel pump and sending unit (both sold separately). Order the model designed to fit your vehicle.
Not Yet Reviewed
$1,635.95
Go back to a simpler time, when things worked and you could rely on your Cummins fuel system. Since the introduction of the common rail fuel system in 2003, all Dodge 5.9L/6.7L Cummins Rams were equipped with a reliable Bosch CP3 high-pressure fuel pump. Then in 2019, Cummins made major changes and switched to a Bosch CP4.2 pump, which has seen its share of problems in the GM and Ford applications. Due to the CP4's lower volume output, Cummins had to increase the drive ratio of the pump and turn it faster to keep up with fuel demand. By installing a Venom CP3 with the BD Diesel conversion kit, you can take advantage of this overdrive. The CP3's larger volume, combined with this increased drive ratio, allows you to supply more fuel for increased power potential! The CP4 is also susceptible to catastrophic failure. When disaster strikes, the entire fuel system requires replacement after metal debris from the failed pump spreads throughout. Cleaning the tank, replacing lines and injectors, and, of course, a new pump can end up costing you in excess of $10,000 in repairs. Prevent a costly failure, increase power and add durability by backdating your Cummins to a Venom CP3 with a conversion kit from BD Diesel. The kits come with everything you need for install, and they do not require tuning. Kits are available with or without a stock CP3 pump—and are also offered with a high performance R900 stroker pump. Additional product features: * Replaces CP4 injection pump with reliable CP3 pump * Designed for use with Duramax-style CP3 pump * CP3 pumps 25 percent more volume than CP4 * EPA-compliant * No core charge
Not Yet Reviewed
$1,993.95
On Sale
Holley Sniper 2 EFI Inline Pump Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. New for Sniper 2 is the Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12 V source is all that's required to power the PDM and your Sniper EFI. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Includes 20 feet of 3/8 in. vapor guard fuel hose, filters for before and after the pump, fittings and hardware, cushioned mounting brackets, and an external, inline pump * Can be used with 3/8 in. factory sending units or add a dedicated bulkhead fitting * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected
( 17 )
$1,749.95
—
$1,999.95
$1,573.95
—
$1,798.95
On Sale
Holley Sniper 2 EFI Inline Pump Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Includes 20 feet of 3/8 in. vapor guard fuel hose, filters for before and after the pump, fittings and hardware, cushioned mounting brackets, and an external, inline pump * Can be used with 3/8 in. factory sending units or add a dedicated bulkhead fitting * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected
( 24 )
$1,749.95
—
$1,899.95
$1,573.95
—
$1,708.95
On Sale
Holley Super Sniper EFI Stealth 4150 fuel injection systems are what you need to convert your vehicle to fuel injection. Holley Super Sniper Stealth 4150 systems will also look great under the hood in your choice of shiny, ceramic black, and classic gold finishes. Features and benefits include: * Compatible with draw-through or blow-through forced induction applications * 2 Bar MAP sensor * Integrated ignition timing control * -6AN fuel inlets * High-resolution full color touchscreen for initial setup, tuning, and gauge displays * Simple calibration wizard--answer a few questions about your engine and it creates the base map, then starts tuning on its own! No laptop required * Self-tuning ECU means you don't have to be a computer/tuning wiz to have EFI * The included genuine Bosch LSU 4.9 wideband oxygen sensor provides real time Fuel Map Learn * Three programmable 0-5 V sensor inputs for oil/fuel/dome or nitrous pressure or other critical information * Six programmable ground outputs, five programmable ground inputs. These can provide the ECU with an input to turn on function, such as an ignition timing * One +5 V reference output, +5 V power supply for 0-5 V sensors, one sensor ground supply for 0-5 V sensors * Throttle body mounted ECU--no extra boxes to mount * Only 4 wiring connections required--battery +, battery -, switched ignition, and rpm * Required external fuel pressure regulator, 12-886 is recommended * OEM-style TPS/IAC, for years of dependable service * Included clamp-on oxygen sensor kit for 2.250 in. exhaust ensures a leak-free oxygen sensor installation, with stainless steel T-bolt clamps and a stainless steel (weldable) oxygen sensor flange
( 4 )
$2,099.95
$1,888.95
On Sale
Holley Sniper EFI Stealth 4150 fuel injection systems feature four 100 lb.-hr. fuel injectors capable of supporting up to 650 hp naturally aspirated. The Sniper Stealth 4150 ECU is capable of fuel map self-learning and ignition timing control--improving idle stability, drivability, and wide-open throttle horsepower! These systems also include transmission kickdown provisions for GM TH350/400, 200R4/700R4 and Ford C4/C6 applications. The 4150 is available individually or in a complete Master Kit (see contents listed below). ALL Sniper EFI Stealth 4150 systems feature: * Bolt-on 4150 flange carburetor replacement * Throttle body mounted ECU; no extra boxes to mount * Supports up to 650 hp with four 100 lb.-hr. injectors * All of the wiring exits below the rear fuel injector cover—for a completely stealth installation * Timed spark part for vacuum advanced distributors located under the front fuel bowl—for easy access to the distributor * Air entry is machined to fit most stock-style air cleaners with air cleaner locator provisions * Only four wiring connections required (battery +, battery -, switched ignition, and RPM) * External fuel pressure regulator required, set to a base pressure of 58.5 psi, such as 12-886 * Integrated ignition timing control * High-resolution full-color touch screen for initial setup, tuning, and gauge displays * Simple calibration wizard (answer a few questions about your engine and it creates the base map, then starts tuning on its own); NO laptop required * Self-tuning ECU means you don't have to be a computer/tuning wiz to have EFI * The included genuine Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learn * OEM-style TPS/IAC and fuel pressure regulator, for years of dependable service * Included clamp-on oxygen sensor kit for 2.25 in. exhaust ensures a leak-free oxygen sensor installation, with stainless steel T-bolt clamps and a stainless steel (weldable) oxygen sensor flange * Available in three finishes: shiny, ceramic black, and classic gold MASTER KITS also include complete fuel system with an external fuel pressure regulator preset to 58.5 psi, 20 ft. of 3/8 in. Vapor Guard fuel hose, fuel pump, filters, necessary hardware, and bulkhead fitting to return fuel into the tank.
( 41 )
$1,749.95
—
$1,799.95
$1,573.95
—
$1,618.95
On Sale
Why convert your LML's fuel system from a CP4 to a CP3? Since its introduction, the CP4 has proven to be less reliable and less capable than the CP3 used in previous Duramax platforms—resulting in costly repairs for owners when a CP4 fails. You can improve your LML Duramax's reliability and fueling capability, as well as avoid costly failure with Fleece Performance LML CP3 conversion kits. They provide OEM fit-and-finish features, like Fleece's exclusive molded hoses for the fuel feed and return, high flow CP3 fuel fittings, and their valley feed line to support aftermarket lift pump applications. Fleece Performance LML CP3 conversion kits are offered with or without pump and the pump kits come in two different style pumps—a Bosch CP3 injection pump or Bosch CP3 pump with heavy-duty 10mm cam. Choose the kit that is right for you. All kits include: * CP3 to rail high pressure fuel line * High-flow CP3 feed and return fuel fittings * Preformed fuel feed and return fuel hoses * CP3 mounting adapter * Dosing injector distribution block, feed and return lines * FCA extension harness * Low pressure fuel feed line * Hardware kit
Not Yet Reviewed
$1,999.00
$1,699.15
Aeromotive 7.0 gpm brushless variable speed gear pumps deliver ground-shaking performance with advanced technology. Aeromotive took what they learned from their mechanical spur gear pumps and engineered it to work in a compact flow-through design, creating a fuel pump that is able to move more fuel at pressures up to 150 psi without a drop in flow. Aeromotive true variable speed controller offers the advantages of built-in pump speed control via a dedicated 0 to 5 V analog DC input signal. The controller capitalizes on Aeromotive's existing brushless technology by reducing fuel flow during low engine demand and decreasing an already low current draw, therefore minimizing both motor heat and the introduction of environmental via reduced fuel recycling. Features include: * E85 compatible, reduce maximum fwhp by 30 percent * Lighter than the traditional external mount pumps * Reduced current draw at higher, EFI pressures * Extended service life in methanol and ethanol * New integral spur-gear pumping mechanism * 90 psi continuous operating pressure and up to 150 psi peak pressure, base plus boost * Integral, external brushless controller for clean installation, cooler fuel, and enhanced reliability * ORB-12 inlet and ORB-10 outlet ports * Requires straight 12 V DC to 16 V DC power supply * Not compatible with pulse modulated systems or fuel pump speed controllers Supports: * EFI -- Up to 4,800 fwhp on gas--naturally aspirated -- Up to 3,400 fwhp on gas--forced air induction -- Up to 3,360 fwhp on E85--naturally aspirated -- Up to 2,380 fwhp on E85--forced air induction -- Up to 1,680 fwhp on methanol--naturally aspirated -- Up to 1,190 fwhp on methanol--forced air induction * Carbureted -- Up to 5,400 fwhp on gas--naturally aspirated -- Up to 3,800 fwhp on gas--forced air induction -- Up to 3,780 fwhp on E85--naturally aspirated -- Up to 2,400 fwhp on E85--forced air induction -- Up to 1,890 fwhp on methanol--naturally aspirated -- Up to 1,200 fwhp on methanol--forced air induction
( 1 )
$2,152.75
On Sale
Holley Sniper EFI Quadrajet self-tuning fuel injection systems are ideal replacements when you're tired of rebuilding the 50-plus-year-old Rochester Quadrajet (Q-jet) on your classic ride. They're the first bolt-on, spread-bore, EFI throttle-body systems not requiring any additional adapters, sealing plates, or intake manifold swaps. They retain the same great features as the 4150 Sniper EFI version (four 100 lbs.-hr. injectors; built-in timing control; high resolution 3.5 in. full color touchscreen; etc.). Their throttle body will support naturally aspirated power up to 500 hp. In addition, they offer multiple fuel inlet configurations that allow for a stock-appearing installation and fit most stock air cleaners. Modernize your Q-jet-powered classic vehicle with a Holley Sniper EFI Quadrajet self-tuning fuel injection system. They are offered individually or in Master kits with external fuel pressure regulator preset to 58.5 psi, 20 ft. of 3/8 in. Vapor Guard fuel hose, fuel pump, filters, necessary hardware, and bulkhead fitting to return fuel into the tank. Features, items, and specs: * Designed to deliver the signature "Rochester Roar" at wide-open throttle! * Throttle body-mounted ECU–no extra boxes to mount * Only 4 wiring connections required (battery positive and negative, switched ignition, and rpm) * Transmission provisions on throttle lever for TH350/TH400 and 200R4/700R4 * Universal throttle and transmission kick-down bracket * Brake booster adapter (if required) * Simple calibration wizard (answer a few questions about your engine and it creates the base map, then starts tuning on its own—no laptop required) * Internal fuel pressure regulator preset to 58.5 psi * 20 ft. of 3/8 in. Vapor Guard fuel hose * Fuel pump and filters * Necessary hardware and bulkhead fitting to return fuel to the tank * Genuine Bosch LSU 4.9 wide-band oxygen sensor provides real-time fuel map learning * OEM-style throttle position sensor (TPS) and idle air control (IAC) for years of dependable service * Clamp-on oxygen sensor kit ensures leak-free oxygen sensor installation with stainless steel T-bolt clamps and weld-ready oxygen sensor flange * United States Coast Guard approved (certified to ISO 8846, SAE J1171 requirements) * Available in three finishes--Classic Gold, Shiny, and Black Ceramic
( 7 )
$1,949.95
$1,753.95
On Sale
FiTech has some of the best-engineered and priced throttle body systems on the market. Their LS EFI 500HP fuel injection systems bring incredible ingenuity to the market. FiTech fabricated many aluminum parts for these systems, including the low-profile 92mm billet throttle body, high-volume billet fuel rails, and an intake manifold with 1,500 to 6,500 rpm powerband and 3mm construction. Sequential spark and fuel control mates 36 lbs./hr. injectors, a plug-and-play wiring harness, and a color touchscreen self-learning ECU. This allows for programing two fan control outputs, most tach and speedometer output drivers, and target AFR and timing on the fly. A suction cup mounting bracket puts the controllers at your fingertips and allows for impressive visual aids. The optional transmission control feature is suitable for 4L60, 4L65, 4L70, or 4L80 GM transmissions. FiTech LS EFI 500HP fuel injection systems with transmission controller provide impressive power and performance, while allowing you to save a little green for your next tires. Additional features: * Black anodized aluminum parts for style and corrosion resistance * High-flow, cable-operated throttle body * Bosch wideband-controlled * Stainless oxygen sensor bung * Compatible with car and truck coils * AN fittings and fuel crossover * Works with custom cams * Designed for applications making at least 6 in. of vacuum at idle * 24X and 58X crank and cam compatible * Programmable touchscreen hand-held controller with data log features
( 41 )
$1,896.00
—
$2,494.99
$1,516.80
—
$1,995.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
