Availability
Showing In Stock Items. Show All 20 Items.
COBB Tuning front mount intercooler kits replace your overworked stock units to deliver a drastic increase in cooling and power, especially when paired with tuning from Accessport (not included). Available for several applications, most of these kits feature larger cores with efficient bar and plate designs and cast aluminum end tanks, piping, and more (depending on your application). Escalating intake air temperatures under the hood can overwhelm your factory FMIC with heatsoak and take away power. Put one of these COBB Tuning front mount intercooler kits near the top of your modification list and make your car come alive with new found colder air charge.
Not Yet Reviewed
$1,675.00
S&B Filters fuel tanks maximize the space under your diesel truck and empower you to fly by more gas stations like a compact, fuel-efficient car. The folks at S&B know even lifted trucks often sacrifice clearance for larger holds. That's why they design their tanks with a contour around the driveshaft area, helping you maximize clearance. A transfer pump fitting allows you to pull fuel from your now larger tank for equipment—saving valuable space in your truck's bed. Spend less time at the pump and more time driving with the S&B high-capacity replacement fuel tank designed to fit your vehicle. Features, items, and specs: * Brass vent and rollover vent valve * Included baffles cut down on fuel sloshing * Integrated fuel sump for aftermarket fuel pumps * Integrated OEM-style fitting for sending unit installation ease * Front cradle support design (instead of a band that wraps under) to help avoid band debris damage and failure where it's most likely to occur * Front support skid plate on some models * No modifications necessary for installation
( 5 )
$1,549.00
Maximize your ride's performance with a Mishimoto intercooler! These high performance intercoolers significantly lower air intake temperatures, while safely increasing horsepower for small and large turbo applications. Constructed from 6061 aluminum and precision TIG-welded, Mishimoto intercoolers feature sleek styling in a choice of colors for the ultimate in good looks. Whether you want to show it off or go with the popular sleeper look, Mishimoto makes an intercooler to give your engine--and your style--a boost!
( 2 )
$1,565.95
—
$2,055.95
Mishimoto intercooler and pipe kits let your engine breathe in the coolest, densest air possible to help improve performance and overall efficiency of heat dissipation, along with being strong enough to handle just about anything. Mishimoto performance intercoolers offer increased core volume and fin surface area, which results in increased flow, reduced outlet temperatures, and the ability to generate gains in horsepower and torque. Intercoolers are available in black or silver. Pipes are available polished or with a black powdercoat. As with all their products, the Mishimoto intercooler and pipe kits are backed by their signature Mishimoto Lifetime Warranty.
Not Yet Reviewed
$1,600.95
—
$2,178.95
AWE Tuning Performance intercoolers are 37 percent larger than stock. The high-flow bar and plate style aluminum units have resulted in intake temperatures reduced by up to 55 degrees F and improved drop pressure resistance through the core. If your engine runs hot, tackle the high intake air temps with a Performance intercooler. Drivers have experience double-digit gains in horsepower and torque! Order the model recommended for your vehicle. Additional product details: * Forced induction * Perfect fitment, guaranteed * No cutting or grinding of car or brackets * Some models include silicon intercooler pipe * Mounting brackets included * Fits securely behind stock crash bar
Not Yet Reviewed
$1,650.00
—
$2,065.00
On Sale
FiTech Go EFI 4 600 hp self-tuning fuel injection systems with Hy-Fuel in-tank retrofit modules are perfect for your everyday driver, weekend street machine, or bracket racer. They feature the fastest, most accurate self-learning available, timing control, wet flow annular discharge, and tons of additional features. These systems mount the self-adjusting ECU on the throttle body, will fit any 4-barrel manifold, and are designed to support 250 to 600 hp engines. Go EFI 4 kits include a hand-held controller with touchscreen for initial setup; throttle linkage that suits most transmissions; and parts are manufactured with OE engineering. FiTech Hy-Fuel tight-fit in-tank retrofit kits are sleek miniature assemblies that allow you to fit a high-volume fuel system into almost any tank, making them ideal for both original and aftermarket fuel tank applications. Additional features include: * Four Hi-Flow 600 hp injectors * Self-tuning ECU immediately takes over after startup * Basic install can be done with just four wires and two sensors * Ignition timing can be controlled and adjusted (via touchscreen) * Uses a Bosch 4.2 wideband oxygen sensor * Systems with mounted ECUs offer spark control without the need of an external spark box or special distributor * Air/fuel ratios can be optimized on-the-fly as you drive * Includes adjustable fan switch * Single 255 lph fuel pump for engines up to 600 hp * Voltage-controlling fuel pump control reduces power under low loads to lower temperatures * Will work with CDI box, but not required to control timing * And many more features
( 1 )
$1,986.99
$1,788.29
On Sale
FiTech Go EFI 2x4 625 hp system/Go-Spark fuel injection master kits are inclusive EFI kits with fuel delivery solutions, plus an upgrade to high-powered sparks for improved combustion and power output. In these master kits, FiTech mates their 2x4 TBIs with either a Go Fuel in-tank or fuel cell pump module, or Go EFI in-line pump kit to provide everything needed to convert your carbureted vehicle to EFI. And going a step further, the Go-Spark CDI ignition will elevate the spark for even more improved performance. Choose the master kit with your preferred fuel delivery solution. Go EFI 2x4 625 hp system lets everyone know you mean business with a pair of 4-barrels crowned atop your engine! The 2x4 is supplied with two throttle bodies, one with the brains and integral ECU, the other with the brawn. Both bodies feature four injectors and will support up to 625 horsepower (naturally aspirated). The system is supplied with two throttle bodies, handheld controller, cable and windshield mount, throttle body vehicle side harness, WBO2 sensor, bung kit, coolant sensor, gasket, mini USB cable, instructions, and warranty information. The throttle bodies are available in two finishes. Go-Spark produces a series of multiple sparks below 2,500 rpm to improve starting, idle quality, and throttle response. At higher rpm, the CD technology continues to deliver full energy sparks through racing rpm to ensure complete combustion of the fuel mixture. Designed for 4-, 6-, and 8-cylinder engines equipped with a distributor, Go-Spark accepts the trigger signal from an HEI, amplifier, points, or 2-wire non-magnetic pickup distributors. Fuel delivery options: * Go Fuel universal in-tank pump modules—255 or 340 lph—can be used on tanks with a depth of 6 to 15 in. A feed line, vent, and return are machined into the module for easy high-pressure line connections. Gaskets, terminals, and clamps are included. * Go Fuel universal in-tank regulated pump module—255 lph or 340 lph—single line system with a depth of 6.5 to 15 in. Pump has -6 AN pressure port and a 4-Bar (58 psi) regulator and suitable for most EFI-ready tanks * Go Fuel single pump fuel cell module—returnless--340 lph--billet top assembly is machined with a 2 in. filler assembly, as well as an internal regulator to maintain 58 psi. The module is machined to fit fuel cells with a 12-bolt flange or can be installed on any tank with the supplied hardware. * Go EFI inline pump kit—255 lph external pump suitable to support engines producing up to 600 (non-aspirated) hp. Supplied with 40 ft. of high-pressure fuel hose, two fuel filters, including a serviceable 10-micron filter, fittings, mounts, and clamps.
Not Yet Reviewed
$2,297.99
$1,953.29
On Sale
aFe BladeRunner GT Series intercoolers feature a bar and plate core design that outflows stock intercoolers by increasing heat dissipation over the much smaller tube and fin design used by the OEM. The unique BladeRunner end tanks are constructed out of 3/16 in. aluminum plates that incorporate seven Multi-Directional Vanes (MDV) throughout the intercooler. This aFe technology is used to direct hot air flow through the entire intercooler core, which allows for greater cooling. aFe BladeRunner GT Series intercoolers are100 percent TIG-welded by certified craftsmen for race-quality strength and durability. They are pressure tested at 200 psi.
( 5 )
$2,007.60
—
$2,300.55
$1,806.84
—
$2,070.50
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
