Availability
Showing In Stock Items. Show All 46 Items.
On Sale
Holley Sniper 2 EFI 3.5 in. LCD touch screen controllers give you access to a wide range of tuning options. These hand-held controls can be used as a fully customizable data monitor—and with the unit's 3 1/2 in. display, your Sniper EFI system vitals can be viewed at a quick glance! Monitor a vast number of parameters in pre-configured, multi-gauge, and monitor screens—or customize your own with Holley Sniper 2 EFI 3.5 in. LCD touch screen controllers. Features and benefits include: * Full-color, backlit 3 1/2 in. touch-screen LCD * Laptop-free tuning changes to help optimize mileage, drivability, and performance * Basic tuning options allow simple adjustments of basic fuel, fuel learn, basic idle, spark, and more * System tuning options allow modifications to outputs, engine setup, and ignition setup * Advanced tuning options allow fine-tuning of fuel, closed loop, learn, and idle—including IAC parameters and idle spark * Set up ECU data-logging, download data-logs, or upload and download global folders with the SD card, update ECU firmware, and adjust rev limiters 1 and 2 * Includes the touch screen controller, mounting sleeve, power and extension harness, and SD card * Screen dimensions – 3.350 in. wide x 2.850 in. tall x 0.700 in. thick * Sleeve dimensions – 3.625 in. wide x 2.925 in. tall x 1.000 in. thick
( 1 )
$279.95
$251.95
Add Delphi fuel injection idle air control valves to control the airflow into your engine. Delphi OE replacement valves provide a superior fit and finish that result in an easier installation for you. Their idle air control valves meet federal emissions regulations, increase your fuel efficiency, and eliminate the potential for malfunctions. Get control over the amount of air allowed to flow into your engine, and your engine idle speed, in a variety of load conditions when you replace your air control valves with Delphi fuel injection idle air control valves.
( 34 )
$109.99
On Sale
Holley LS Hi-Ram fuel rail adapter kits are designed to enable correct placement of your fuel rail when using a short style injector versus the taller LS1 style. These kits include high-volume fuel passage rails to allow for high-horsepower applications and to dampen fuel pressure oscillations. Holley kits also include: * Fuel rail adapters * Mounting hardware * Injector O-rings * Installation instructions
( 2 )
$249.95
$224.95
Ford Performance Parts GT350 throttle body adapters are manufactured from billet aluminum and include fasteners. These adapters allow you to mount the GT350 87mm throttle body on the Mustang GT intake manifold.
( 1 )
$116.99
Wilson Manifolds throttle cable brackets look awesome! These beautiful throttle cable brackets will make you forget about trying to fabricate cable brackets for your intake manifold. Fully machined from 6061 T6 aluminum, Wilson Manifolds throttle cable brackets provide a precision fit for a hassle-free install and lasting good looks.
Not Yet Reviewed
$150.00
To complete your throttle body install you'll need Wilson Manifolds V-band completion kits. These kits contain the flanges, clamps, and O-rings necessary to complete your install properly.
( 1 )
$154.00
Minimize or eliminate fuel odors with Tanks Inc. fuel vapor canisters, which filter hydrocarbons from fumes released during daytime thermal fuel expansion and tank refueling. The canisters are purged when fresh air is drawn into the tank during thermal contraction or while the engine is running, returning the hydrocarbon molecules to the fuel. Available with or without heat shield. If the canister is mounted in the engine compartment, use the heat shield version. Select the one needed for your vehicle. Features: * Spring loaded volume compensator compresses carbon to reduce internal abrasion caused by vibrations * Heavy-wall, elliptically shaped body enhances durability and pressure resistance * Large surface area filters located at each end of the canister minimize airflow restrictions while keeping carbon in place. * Patented "floating bracket" simplifies installation, reduces torque transmission and protects end caps from heat * Durable polymer body with welded end caps and 5/16 in. vent hose connection * Designed to withstand a temperature range from -40 to 176 degrees F * The canister can be mounted in any orientation * 1/2 L capacity * 9.85 in. L x 3.8 in. W x 2.9 in. H Note: These canisters function as hydrocarbon vapor control devices. If liquid, such as water or gasoline, enters the canister, it will coat the carbon and hinder its ability to capture gasoline vapors. Although a single instance of liquid entering the canister won't damage the carbon, a poorly designed system that repeatedly allows liquid inside will impair the canister's functionality.
( 4 )
$124.99
—
$149.99
On Sale
With Holley Sniper throttle bodies, Holley engineers went back to the drawing board to build the ultimate air valve for your engine! They feature enlarged bore sizes, allowing for increased airflow to support your higher horsepower needs. A progressive throttle pulley enhances low-speed drivability, and a double return spring provides solid and secure throttle control feel. These units are maximized for your application, with a 4-bolt style mounting pattern; most models include bolts and gaskets. Order the throttle body designed for fitment with your year/make and engine family.
( 39 )
$249.95
—
$349.95
$192.95
—
$241.15
Our lightweight Summit Racing™ fuel rail kits fit like stock, but deliver the increased fuel volume that your LS1 needs for maximum performance. The 3/4 in. i.d. rails are precision CNC-machined from high-strength aluminum with a great looking, black anodized finish. The kits include fittings with Viton® O-rings for a superior seal, mounting brackets, and stainless steel hardware.
( 12 )
$104.99
These Trick Flow® TFX™ fuel rails are perfect when building a custom fuel system. The fuel rails are threaded for -8 AN fuel fittings. They also feature a black anodized finish that resists corrosion, and mounting brackets are included.
( 18 )
$242.99
—
$292.99
On Sale
Holley Sniper 2 EFI main wiring harnesses include the switched 12 V power wire, main battery power and ground, fuel pump relay, coil - input wire, and HyperSpark distributor connector. This harness is braided split-wire loom to keep the wires protected and your engine bay clean! Holley Sniper 2 EFI main wiring harnesses feature: * One 5 ft. 12 gauge main battery power wire * One 5 ft. 12 gauge main battery ground wire * One 30 amp fuse with cover with mounting tab for a secure installation * One 40 amp 5-pole relay with mounting tab for a secure installation * One 20 ft. 12 gauge fuel pump 12 V power wire * One 3 ft. 20 gauge coil input wire * One 5 ft. 20 gauge switch 12 V ignition wire
( 1 )
$212.95
$191.65
BBK high-flow billet aluminum fuel rail kits are designed to work with stock injector angles and spacing. They work on stock or aftermarket intake manifolds, so you can get the same great performance and value that they deliver. Recommended for higher horsepower applications where larger fuel injectors are used, the BBK high-flow billet aluminum fuel rail kits will eliminate fuel pressure loss. The kits include precision CNC-machined billet aluminum fuel rails, mounting hardware, brackets, and hose connectors.
( 24 )
$269.99
On Sale
Holley Sniper EFI main wiring harnesses include the switched 12 V power wire, main battery power and ground, fuel pump relay, coil input wire, and magnetic distributor input wire. These kits also include 6 ft. of 3/8 in. black braided split wire loom to keep the wires clean and protected from abrasion. Includes: * 5 ft. of 12-gauge main battery power wire * 5 ft. of 12-gauge main battery ground wire * 30 amp fuse and cover with mounting tab * 40 amp 5-pole relay with mounting tab * 20 ft. of 12-gauge fuel pump 12 V power wire * 3 ft. of 20-gauge crank signal positive wire * 3 ft. 20-gauge crank signal negative wire * 3 ft. 20-gauge coil input wire * 5 ft. 20-gauge switch 12 V ignition wire
( 1 )
$164.95
$148.45
These Edelbrock throttle body intake elbows are designed using the latest technology for unbeatable flow and performance. They adapt GM LS1, LS2, and Ford 5.0L based throttle bodies to EFI intake manifolds with a traditional square bore, 4150 type, mounting flange. Edelbrock throttle body intake elbows are available in standard or box-style configurations to fit a wide variety of engine and hood combinations. Cast from high-quality aluminum, the throttle body elbows feature several bore inlet sizes with your choice of natural or black powdercoated finishes.
( 14 )
$183.95
—
$248.95
FAST idle air control motor adapters are designed to adapt the GM-style FAST idle air control motor to a Ford throttle body. They will facilitate the installation and use of the FAST XFI or other EFI street or competition systems. They are manufactured from aluminum, have a natural finish, and include all necessary mounting hardware.
( 6 )
$131.95
—
$220.95
On Sale
Holley EFI Hi-Flow billet fuel rails offer flow capacity for high horsepower applications and billet aluminum construction that is machined and black anodized for great style under the hood. Laser-etched with the "Holley EFI" logo, the fuel rails feature a 5/8 in. diameter fuel passage, -8 ORB ports on each end, and an 1/8 in. NPT port for a fuel gauge installation if you choose to do so. Holley EFI Hi-Flow billet fuel rails are designed with the factory injector clip reliefs so that your factory injectors and retaining clips can be reused. This is important as the clips locate the injector radially for proper injector spray pattern onto valves. The kits include fuel rails, mounting brackets, and required mounting hardware.
( 3 )
$232.95
$209.65
—
$249.95
On Sale
Holley EFI fuel pulse dampers act in tandem with the fuel pressure regulator to further control the fuel pressure in an EFI system. They act to smooth out the pressure pulsations caused by the injectors opening and closing as well as the fuel pump operating. These pulsations happen so quickly that in many cases they can't be identified with an analog gauge but can cause issues with fuel delivery to the engine. Options include: * Direct-mount or inline mount * Multiple inlet/outlet dimensions * Standard or extended fuel pressure range * Male or female threads Features: * Engineered to stabilize pressure pulsations caused by the injectors opening; ideal for applications with large fuel injectors and high-volume fuel pumps * Compatible with any fuel; full anodized billet aluminum construction with stainless steel springs and fluorosilicone diaphragm * Fittings included for damper/regulators and direct-mount dampers * 1/8 in. NPT port on body of damper/regulators and inline dampers for easy installation of mechanical pressure gauge or pressure transducer * Vacuum fitting and one foot of hose included with all dampers for vacuum referencing
( 6 )
$118.95
—
$154.95
On Sale
MSD Atomic EFI billet fuel rails are the perfect complement for your Atomic AirForce intake manifold. Whether you're looking for just rails, or complete kits with all the necessary plumbing--these fuel rails will have you looking for any excuse to pop the hood. They feature a bright dip, black anodized finish with laser-etched logos and a 5/8 in. diameter fuel passage flow capacity for high-horsepower applications. Make your engine look as good as it performs with MSD Atomic EFI fuel rails. Features, specs, and parts may include: * Fuel rails are machined to accept large -8 (3/4 in.-16) O-ring fittings * Includes mounting brackets and hardware * Includes four -6 to 3/4 in.-16 O-ring adapters
( 1 )
$249.95
—
$338.95
$137.95
—
$224.95
Performance Design billet fuel rails will allow you to complete your fuel system without having to source your own fuel rail and confirm fitment. The fuel rails come with stainless steel mounting and are available in red or black anodized finishes. While these kits do include stainless steel mounting hardware, port fittings to feed or plug the rail ends will have to be sourced due to the variety of available customizations. You can forget about fitment issues with the Performance Design billet fuel rails when you order the model designed to fit your intake manifold. Select the application needed.
Not Yet Reviewed
$176.50
—
$219.99
FuelTech Peak and Hold 8A/2A injector drivers are 4-channel low impedance units designed to keep up with the demands of today's high horsepower engine fuel injectors. The peak and hold circuit opens the injector with a high current (Peak) pulse--and then switches the current down to hold the injector open to feed the volume. Additional details: * Controls up to 4 injectors with impedance below 1.5 ohm * 16 Bosch 160 lbs./h (1600cc) injectors (4 per channel) * 8 Siemens low-impedance injectors (2 per channel) * 4 MSD low impedance injectors (2 per channel) (with 2 ohms impedance per injector) Package includes: * 1 Peak and Hold 8A/2A * 1 operation and installation guide * 1 mounting kit (four rubber mounts, four washers and four 1/4 in. nuts) * 6 ft. Peak and Hold unterminated harness (optional) * 1 FuelTech black carbon fiber sticker
Not Yet Reviewed
$219.00
Wilson Manifolds idle air control and motor kits help you complete the install of your throttle body. These universal adapter/motor kits include an IAC adapter to use with a Ford-style throttle body, a screw-in GM IAC, O-ring, and two mounting screws.
( 2 )
$180.00
—
$216.00
Radium Engineering offers top feed fuel rail conversion kits for specific applications. Manufactured with a large 0.69 in. internal bore, the fuel rails can support all necessary engine power requirements. They are CNC-machined from a custom 6063 aluminum, media blasted, black anodized, and laser-etched for a high-quality surface finish. These kits are compatible with all fuel types, including popular alcohol mixtures such as E85. The Radium fuel rail converts the OEM side feed fuel injector setup to top feed, allowing the use of high-flow fuel injectors (not included). Each kit includes two different sets of mounting feet, allowing various height fuel injectors to be used. The anodized aluminum mounting feet secure the fuel rail to the intake manifold reusing the OEM thermal insulating spacers. The fuel injector bores and the included press-fit injector seats are designed for 14mm injector O-rings. These seats include O-rings to prevent boost pressure leaks. They're CNC-machined billet aluminum, anodized, and laser etched.
Not Yet Reviewed
$189.95
With the custom design of Top Street Performance fabricated intake manifolds, you'll need a set of their billet aluminum fuel rails. They've been designed to support high-pressure fuel systems in high horsepower applications—and come complete with -8 AN fittings, mounting hardware, and a durable, braided middle pipe. Available in black and silver, the fuel rails will match whichever manifold you choose. Order the model recommended for your year/make and engine application.
Not Yet Reviewed
$160.48
FuelTech Peak and Hold 4A/1A injector drivers are 4-channel low impedance units designed to keep up with the demands of today's high horsepower engine fuel injectors. The Peak and Hold circuit opens the injector with a high current (Peak) pulse--and then switches the current down to hold the injector open to feed the volume. Additional details: * Controls up to 4 injectors with 1.5 to 3 ohms of impedance * 8 Bosch 160 lbs./h (1600cc) injectors (2 per channel) * 4 Siemens 83 lbs./h injectors * 4 MSD injectors (with 2 ohms impedance per injector) Contents of package: * 1 Peak and Hold 4A/1A * 1 operation and installation guide * 1 mounting kit (four rubber mounts, four washers and four 1/4 in. nuts) * 6 ft. Peak and Hold unterminated harness (optional) * 1 FuelTech black carbon fiber sticker
( 1 )
$219.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
