Availability
Showing In Stock Items. Show All 269 Items.
On Sale
Stock intake manifolds in electronic fuel injection vehicles often fall short of lasting for the life of the vehicle. Being molded from polymers they tend to warp or crack and start leaking vacuum or coolant over the years. Summit Racing™ Premium EFI intakes are just what you need when it's time to replace your manifold as our design improvements address the failures that occur with existing manifolds for this application on the market today. These units are made to fit your specific vehicle and come complete with the necessary hardware for an easy OE type installation. Make this the last manifold you ever buy for your car or truck. Check out these features and benefits below: • Made in USA by OE Tier 1 Supplier • Aluminum crossover design improvement to mount direct to the cylinder head eliminating coolant exposure and eventual failure at the plastic interface of existing manifolds on the market. • High grade coolant resistant material used in coolant fitting and block out locations to coolant system. All coolant exposure areas are addressed with appropriate material. • Heat staked inserts for coil mounting. • Includes alternator brackets, throttle body adapter (application specific), thermostat, gaskets or O-ring seals, and mounting hardware.
( 47 )
$204.99
—
$257.99
$199.99
—
$242.99
Edelbrock Pro-Flo 4 EFI systems provide you with a high performance traditional-style intake and 4150-style throttle body. Unlike regular throttle body EFI systems, Pro-Flo 4 features the fuel rails and individual injectors for each cylinder mounted on the manifold. This Edelbrock design produces the best fuel atomization and distribution for the ultimate performance, as well as delivering the most control and the most efficient way to deliver fuel to your engine. Along with innovative design, Pro-Flo 4 systems have the latest technology with an all-new ECU, and even more features for advanced tuning, with the key being their exclusive E-Tuner app with base calibrations developed on their dyno. Edelbrock Pro-Flo 4 EFI systems include and feature: * Engine Control Unit with faster processor and upgraded Bluetooth chip in a thinner waterproof design * Fully assembled intake manifold with air valve, fuel rails, and injectors * Fully assembled OEM high-quality wiring harness with pre-terminated connectors and labeled connection for a simplified installation * E-Tuner application for setup and engine monitoring * Wideband oxygen sensor * Distributor (not included with LS kits) * Gaskets and hardware * Installation instructions * Ready to run out of the box with pre-loaded calibrations * Self-learning technology--no tuning experience or laptop tuning required * Ignition control--adjust ignition curve with the E-Tuner 4 App for optimal performance and mpg * Offered with multiple fuel injector choices * Now boost compatible up to 15 psi by switching to a 2-bar MAP sensor and downloading the new firmware update from Edelbrock for free! It is recommended to regularly check for firmware updates even if not utilizing boost control. * Systems automatically compensate for altitude and weather changes * E-Tuner 4 app with Bluetooth connectivity between ECU and Android phone or tablet. Includes multiple dash display configurations for monitoring engine vitals and performance; multiple control functions including two adjustable cooling fan outputs, idle speed, AFR set points, acceleration fuel tuning, ignition control, cold start fuel, and cranking fuel.
( 124 )
$2,542.95
—
$2,914.95
Street Demon carburetors redefine street carburetors with clean looks and ease of use. They offer enthusiasts a straightforward design to deliver stable idle, amazingly crisp throttle response, and smooth performance. With optimized calibration and a dual mounting pattern, they are ready to run right out of the box. The carburetors feature an integrated fuel bowl/main body design with the gasket above fuel level and have no plugged passages, eliminating all potential leak paths. Additional features include: * Available with either a ball burnished aluminum, polished aluminum, or black aerospace composite fuel bowl * One-piece air horn assembly with a single fuel inlet * Torsion spring valve control/adjustment permits seamless primary to secondary throttle response, regardless of the throttle opening rate * Dual mounting bolt pattern (square bore or spread bore) fits any street 4-barrel intake manifold. Adapter may be required. * Integrated 700R4/200R4 transmission kickdown cable mounting location * Ford automatic transmission kickdown * Inverted flare and 3/8 in. barb fuel inlet fittings
( 386 )
$499.95
—
$549.95
On Sale
ACCEL Performance fuel injectors provide precise control of fuel delivery and atomization for increased power, improved throttle response, and better fuel economy. They feature either a high or low-impedance design to function accurately with your vehicle's ECU. ACCEL fuel injectors come complete and ready for installation with precision-molded O-rings and fine-mesh fuel strainers. More product features and notes: * Utilize a new low-mass disc design that ensures a spray pattern for ultra-fine atomization and improved burn efficiency * Higher than stock flow rates may require reprogramming
( 219 )
$88.45
$57.49
—
$649.95
On Sale
Holley Sniper offers OE-style 255 lph EFI fuel pump modules for a wide range of vehicles, including many Chevy, Pontiac, Buick, Oldsmobile, GMC, Ford, Mercury, Jeep, Dodge and Plymouth cars and trucks from the 1950s, '60s, '70s, and '80s. These in-tank modules are high-pressure units that flow 255 liters per hour (LPH) and are capable of supporting electronic fuel injection (EFI) engines producing up to 550 hp. A pre-calibrated fuel level sending unit designed to work with the factory fuel gauge for this application is included. Each module also features a HydraMat filter which has a unique internal reservoir that keeps fuel available at the pick-up and also provides protection from contaminates. Fuel pressure is internally regulated to 58 psi, eliminating the added expense and effort of purchasing and installing an external fuel pressure regulator; no separate return line is required because these modules return excess fuel right inside the tank! The Holley Sniper EFI fuel pump module was designed as a direct replacement for your factory pick-up and sending unit. There's no need to purchase a custom EFI fuel tank. You can even retain the factory fuel hard line—just connect the outlet of the pump module to the hard line on your vehicle with EFI-rated fuel hose and hose clamps available in the Earls Vapor Guard line.
( 10 )
$499.95
Stealth 340 pumps are high-output, in-tank, electric fuel pumps for fuel injected and carbureted applications. At a volume rate of 340 liters per hour. These universal pumps bolt into many existing hanger assemblies, and are a direct fit upgrade for many OE applications. These pump will support up to: * 1000 HP (carbureted/naturally aspirated) * 850HP (carbureted/forced induction) * 850HP (EFI/naturally aspirated) * 700HP (EFI/forced induction) * 700HP on E85 (carbureted/naturally aspirated) * 595HP on E85 (carbureted/forced induction) * 595HP on E85 (EFI/naturally aspirated) * 490HP on E85 (EFI/forced induction)
( 16 )
$142.99
Quick Fuel Slayer Series carburetors offer affordability, great looks, and impressive adjustability. Economical horsepower performance is not a dream! Quick Fuel Technology has engineered their Slayer Series of 600 cfm and 750 cfm street carburetors with everything you want at a price you need to fit your budget. Their hand-built quality and all-aluminum construction are outstanding—but consider these additional features: changeable idle air and high-speed air bleeds, 3-stage emulsion circuits, changeable primary idle feed and power valve restrictions, vacuum secondary adjustment screw, and unique secondary metering plate with changeable jets. Pursue horsepower and get more dollar power with the carburetors that let you tune "your way" and offer show-quality appeal—Quick Fuel Slayer Series carburetors.
( 219 )
$499.95
—
$549.95
Edelbrock Performer RPM street fuel pumps are designed for use with all Edelbrock carburetors used in Performer or Performer RPM applications. These high performance street fuel pumps feature a high-quality, 3-stage polished finish. The unique valve design improves flow quantity and quality—and will support engines with up to 600 hp. The high-volume, 3/8 in. NPT inlet and outlets surpass the capacity of many other pumps. Performer RPM street fuel pumps produce 6 psi and do not require a regulator; and the clockable lower housing can be rotated for the best inlet and outlet alignment. They're designed for use with gasoline only.
( 419 )
$186.95
—
$227.95
Quick Fuel HR-Series carburetors are packed full of the features that you'd expect from a high performance carb. They're available in your choice of vacuum or mechanical secondary versions, and you can select the cfm that's right for your specific engine combination. The Quick Fuel HR-Series carburetors feature screw-in air bleeds, QuickSet sight windows in the fuel bowls, 4-corner idle circuits, screw-in idle restrictions, and a bright, shiny finish for durability.
( 47 )
$699.95
—
$799.95
Weiand dual plane Stealth intake manifolds feature long, separated runners for bottom-end and mid-range power, plus a special runner design and larger plenum to flow the air needed for high-rpm horsepower. They mount single, square-mount 4-barrels and make power from idle all the way to 6,000 rpm. That makes Stealth manifolds the perfect choice for your street/strip vehicle. Order the size and style needed for your cylinder head application.
( 153 )
$387.95
—
$449.95
Intended for 500-plus inch, high-rpm engines, Trick Flow® R-Series intake manifolds for Ford 429/460 provide significant horsepower and torque increases. These single plane intake manifolds feature a one-piece, spider-type design with high-flow, individual extended runners and a raised plenum floor. Other features include A319 aluminum construction, extra material for custom port work, and bosses for nitrous or fuel injection. The intake manifolds are designed for use with Holley 4500 Series Dominator carbs. Overall height to carburetor mounting pad is 8.600".
( 8 )
$724.99
On Sale
One of the most popular updates for an older vehicle is swapping out the carburetor for electronic fuel injection (EFI); but using an external pump to supply the high pressure needed for EFI can be a problem. External pumps are loud and often difficult to mount properly. Holley Sniper EFI conversion fuel tanks are the complete bolt-in solution for your EFI conversion. They're a direct-fit for a wide variety of specific applications, require no modifications, and include either a 255 lph or 400 lph submersible pump, a fuel level sender, and internal baffles. For the fuel you need with in-tank quietness, order a Holley Sniper EFI conversion fuel tank. Features include: * 255 lph model supports up to 550 hp * 400 lph model supports up to 750 hp * 60 psi at 13.5 V with a 10.4 amp draw * Made of coated, galvanized steel that is also silver powdercoated for corrosion protection * Fuel pump hanger assembly included * Sender has 1/4 in. NPT supply and return line ports for easy fuel line connection * Barbed vent fitting * Sending units have the correct ohm range for factory gauges * Fuel pump and sender are recessed into the tank * EFI-style tank baffling includes a 4.3L internal fuel tray to prevent starvation * Fits and looks like an OE tank when installed * Include new tank straps, where applicable
( 109 )
$799.95
Get big-time performance with Quick Fuel Q-Series 4-barrel carburetors with high-flow main bodies, which include either down-leg or annular boosters, screw-in idle and high-speed air bleeds, accelerator pump discharge nozzles, and a blended venturi area. These carburetors have CNC-machined billet metering blocks with 4-stage emulsion to provide more precise fuel metering, improve throttle response, and give a more uniform fuel performance curve. With so many great benefits and their blend of performance and drivability, it's no wonder that these Quick Fuel Q-Series carburetors are the popular choice. So, go ahead--throttle it up with Quick Fuel!
( 46 )
$1,099.95
—
$1,449.95
Legendary performance offering more value—Quick Fuel Street-Q carburetors deliver the power without the price. How? By retaining what's most important: the function. Street-Qs feature lightweight cast aluminum metering blocks and cast throttle bodies instead of billet components, so they cost less. But, the Q-Series performance remains: 2-circuit metering, down-leg boosters, changeable idle, high-speed air bleeds, and 4-corner idle. Plus, their universal throttle lever design accommodates Ford A/T kickdowns, 700-R4 bracket mounting holes, and the ability to mount brackets for Chrysler vehicles. Quick Fuel Street-Q carburetors fuel your passion and your budget with race-bred performance at no-frills pricing. Order the model designed for fitment on your vehicle application.
( 26 )
$773.95
—
$899.95
These Quick Fuel SS-Series carburetors are designed to offer the power of a race carburetor in a streetable package that weighs 5 lbs. less than other carburetors. Manufactured completely from aluminum, they allow you to change the idle feed and offer power valve channel restrictions and idle and high-speed air bleeds for the ultimate in tunability. The solid-state, electric-choke Quick Fuel SS-Series carburetors have billet throttle bodies, billet metering blocks, 4-corner idle systems, secondary jet extensions, and notched secondary floats. The vacuum secondary carburetors feature fuel bowls with a single-sight glass window, while the mechanical secondary carburetors have dual-inlet, dual-sight glass 4500-style fuel bowls and include additional links to tune the secondary opening rate. Quick Fuel has done it--they've created all-aluminum Super Street carburetors that are perfect for your high performance street machine.
( 46 )
$949.95
—
$999.95
Trick Flow® TFX™ fuel injectors have so many features, it's no wonder that they are considered one of the best aftermarket injectors available! They atomize fuel better, resist clogging, are quieter, and require less energy to operate than other injectors. Low magnetic stainless steel bodies help prevent moisture contamination, and OEM-style clip grooves eliminate possible fuel leaks. Other features include electronically drilled and machined disc-type fuel control valves, improved nozzles and coil windings, and Viton® O-ring seals to prevent air leaks under extreme operating conditions. High-quality, 1/2 micron filter screens keep foreign debris and contaminants from entering the injectors to ensure proper performance and a long life cycle. TFX™ fuel injectors are 100 percent duty cycle tested to ensure reliability and performance. All flow values are at 3 bar (43.5 psi).
( 37 )
$76.99
—
$674.99
Holley 525 LPH fuel pump modules are designed and engineered to meet the demands of today's high-pressure and high-flow engines with efficiency, reliability, and decades of engineering expertise. These high performance components with OE-quality and fitment in mind will deliver maximum fuel flow throughout a wide pressure range to support major horsepower. Kit includes assembled module, a new filter sock, flange O-ring, and the lock ring to help complete installation into stock fuel tanks. Holley 525 PLH fuel pump module features: * 6061-T6 Aluminum fuel pump module with a 525 LPH (liters per hour) * Sniper pump assembly drops into stock EFI fuel tank on select vehicles * 6AN O-ring outlet and return ports for easy plumbing connections * Can be used with both carbureted and EFI (Electronic Fuel Injection) fuel systems depending on your needs * Supports up to 1200 EFI or 1450 carb (hp at 60 psi at 13.5 V/16.9 amp draw; individual systems will vary based on fuel system design, the regulator type, fuel cell location, etc.) * Flange is bright dip black anodized for corrosion protection from undercar moisture
( 2 )
$431.95
On Sale
Holley Street Performance mechanical fuel pumps are designed to work with stock or mildly modified engines. Ranging in performance styles of 80 to 225 gph, their body castings can be rotated 360 degrees to ease mounting in difficult places and they have large orifices for high flow rates. These pumps are not compatible with methanol or alcohol fuels and should not be used with fuel injection systems. A fuel pressure regulator is required for 130 gph versions.
( 349 )
$230.95
$136.95
—
$249.95
ARP rugged, black-oxide coated chromoly intake manifold bolts are rated at 170,000 psi. They're precision-machined for optimum thread engagement and have a wide-area flange for better load distribution. They also feature precision-rolled threads, which prevent galling, while promoting more consistent torque loading. These bolts are available with either hex or 12-point heads, and washers are included.
( 395 )
$25.99
—
$29.99
Need a fuel tank? There's only one place to get exactly what you need: Tanks Inc.! They offer a large variety of polyethylene, stainless steel, mild steel, and alloy coated steel reproduction gas tanks and fuel injection-ready tanks. EFI-Ready fuel tank applications are ready to fuel many popular vehicles and even a few that are not-so-popular. So, whatever you desire to fit a tank to—be it a street rod, muscle car, classic truck, or that special ride—Tanks Inc. fuel tanks deliver the best quality and fit, blended with their knowledge and expertise, to power your project successfully. NOTE: These EFI-Ready Fuel Tanks are designed for vehicles with engines retrofitted for electronic fuel injection. They have holes pre-drilled for the pump—and the baffling in the tank is suited for electric fuel pumps.
( 73 )
$288.99
—
$314.99
Tanks Inc. manufactures fuel tank kits that look like an OE tank when installed. The fuel pump and sending unit are recessed in the tank for easy installation, with no modification needed to your car. In most applications, these tanks are fuel injection ready. They are all manufactured from galvanized steel with a silver powdercoat finish. Tanks Inc. fuel tanks are perfect for your pro-touring, autocross, or road racing ride. NOTE: These are standard stock replacement kits for carbureted engine applications. They include the sending unit and pump in the tank, ready-to-go for installation. If you have retrofitted your engine for electronic fuel injection, please see the Tanks Inc. EFI-Ready Fuel Tank Kit options.
( 68 )
$565.99
UREMCO remanufactured carburetors are expertly built from core to finished product. Purchasing a reman carb can sometimes be iffy ... unless you choose wisely. United Remanufacturing Co. has over 60 years of experience in carburetor rebuilding. As fuel system rebuilders with expertise and stringent standards, they ensure you the best quality at the best price. They rebuild carburetors from most all automobile and truck manufacturers, and each one is individually inspected and rigorously tested on flow-bench engine simulators by seasoned and knowledgeable employees. All UREMCO carburetors come equipped with new needle and seats, base gaskets, gas filters, and accelerator pumps. The extensive process from disassembly, cleaning, and testing to final assembly restores these carburetors back to their original form, fit, and function. When you purchase a UREMCO remanufactured carburetor, you're buying quality, value, and, most importantly, peace of mind. Order the replacement model designed for your vehicle and engine application.
( 804 )
$160.99
—
$423.99
BBK Power-Plus Series throttle bodies have you covered when it comes to increased airflow for your late model vehicle. These Power-Plus units are cast from high-quality 356 aluminum alloy and are machined on state-of-the-art CNC centers to ensure a perfect fit on your car or truck. Their features include double-sealed bearings, O-ringed throttle shafts, and precision die-stamped linkages—so you know you're getting the best quality throttle bodies at the best value possible.
( 395 )
$229.99
—
$339.99
BBK adjustable fuel regulators have CNC-machined billet aluminum housings and bases. They are fitted with precision diaphragms. Tuning can be done with a simple twist of a screw. Each unit is computer-machined for maximum performance and quality, and features an anodized finish for long-lasting good looks.
( 25 )
$169.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
