CHEVROLET Air & Fuel Delivery - In Stock Filter Options - Vendor In Stock Filter Options - Free Shipping on Orders Over $109 at Summit Racing

Holley Sniper 2 EFI 650 HP Inline Pump Fuel Injection Systems with Power Distribution Module

Holley Sniper 2 EFI Inline Pump Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. New for Sniper 2 is the Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12 V source is all that's required to power the PDM and your Sniper EFI. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Includes 20 feet of 3/8 in. vapor guard fuel hose, filters for before and after the pump, fittings and hardware, cushioned mounting brackets, and an external, inline pump * Can be used with 3/8 in. factory sending units or add a dedicated bulkhead fitting * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected

4.5 out of 5 stars ( 20 )

$2,399.95

—

$2,609.95

Edelbrock Performer EPS Intake Manifolds

Dual-plane Edelbrock Performer EPS intake manifolds deliver dyno-proven horsepower gains from idle to 5,500 rpm, when used with Edelbrock's Performer Series square bore or Thunder Series AVS carburetors. Dyno tests showed an extra 5 hp and 9 lbs.-ft. over their own Performer manifolds. The secret is in the runner design, which is tuned to produce substantial torque increases in the 3,000 to 4,500 rpm range--with peak torque at 3,500 rpm. That's power where you need it the most!

4.74 out of 5 stars ( 315 )

$227.95

—

$652.95

Edelbrock Performer RPM Air-Gap Intake Manifolds

Edelbrock Performer RPM Air-Gap intake manifolds incorporate race-winning technology that's been used on Victor Series competition intakes for years. The open air space from the Air-Gap design separates the runners from the heat of the lifter-valley cover. So, the air/fuel mixture stays cooler all the way to the heads, which produces a denser charge for more power. Runners are tuned to move the power band 1,000 rpm higher than Performer Air-Gap manifolds, from idle to 5,500 rpm up to 1,500 to 6,500 rpm.

4.62 out of 5 stars ( 445 )

$374.95

—

$844.95

Nick Williams Performance Drive-By-Wire Throttle Bodies

Nick Williams Performance drive-by-wire throttle bodies are precision CNC-machined from billet aluminum to meet the demands for increased airflow on the drive-by-wire LSX and LTX performance engines. These throttle bodies require an aftermarket intake to fit the larger diameter throttle blade. They use a 6-pin late model connector that works with late model wiring harnesses. Tuning is required for installation; and the Nick Williams Performance drive-by-wire throttle bodies come complete with stepper motor and electronics installed. There is no need to disassemble your factory throttle body. Order the model designed for your vehicle and engine application.

4.23 out of 5 stars ( 22 )

$690.00

—

$959.00

ACDelco GM Genuine Parts Fuel Injectors

ACDelco GM Genuine Parts fuel injectors are an electro-magnetic valve that meters fuel into the engine's intake manifold or cylinders for combustion, and is a GM-recommended replacement for your vehicle's original component. The engine management computer operates the injector by applying an electric current to the injector solenoid winding—this causes the needle valve to open, and allows the pressurized fuel to be atomized into the intake airstream. These original equipment fuel injectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors. They are also offered in kits with the necessary parts, such as seals, clamps, and spacer.

5.0 out of 5 stars ( 9 )

$42.99

—

$275.99

Edelbrock Performer EPS Intake Manifold and Carburetor Kits

Edelbrock Performer EPS intake manifold and carburetor kits contain all of the necessary pieces to upgrade your induction system. They include an Edelbrock Performer EPS aluminum intake manifold with either a natural aluminum finish or an EnduraShine finish, an intake gasket set, intake manifold bolts, a carburetor stud kit, and a Performer Series 600 cfm electric choke carburetor. The EnduraShine finish is a bright silver chrome finish that resists discoloration from heat and features a clearcoated top coat to enhance abrasion and chemical resistance. The Edelbrock Performer EPS intake uses an all-new runner design tuned to produce substantial torque increases. Ready for a change? Try Edelbrock Performer EPS intake manifold and carburetor kits for your musclecar, hot rod, truck, or ordinary street vehicle.

4.82 out of 5 stars ( 60 )

$754.95

Tanks Inc. EFI-Ready Fuel Tank Kits

Tanks Inc. manufactures EFI-Ready fuel tank kits that look like an OE tank when installed. The fuel pump and sending unit are recessed in the tank for easy installation, with no modification needed to your car. In most applications, these tanks are fuel injection ready. They are all manufactured from galvanized steel with a silver powdercoat finish. Tanks Inc. fuel tanks are perfect for your pro-touring, autocross, or road racing ride. NOTE: These EFI-Ready Fuel Tank Kits are designed for vehicles with engines retrofitted for electronic fuel injection. The tanks have holes pre-drilled for the pump—and the baffling in the tank is suited for electric fuel pumps. They include the sending unit and pump in the tank, ready-to-go for installation.

4.69 out of 5 stars ( 51 )

$541.99

—

$660.99

FAST LSXR Intake Manifolds

The engineers at FAST teamed up with the airflow specialists at RHS to develop a 3-piece, polymer intake manifold. They are constructed from a proprietary advanced polymer material that offers a host of benefits over aluminum aftermarket intakes, including lighter weight and improved strength and heat dissipating characteristics. While they feature a 102mm air inlet that is perfectly suited to the FAST Big Mouth 102mm throttle body, they can also be used with stock or aftermarket 90mm or 92mm throttle bodies. Other features include integrated nitrous bungs and perfect bolt-on fitment that allows for the use of factory accessories without modifications or clearance concerns. FAST LSXR intake manifolds' 3-piece modular design allows for easy disassembly and porting. This new design gives you the ability to remove individual runners from the manifold for modification.

4.04 out of 5 stars ( 26 )

$450.95

—

$1,496.95

Edelbrock Performer RPM Street Fuel Pumps

Edelbrock Performer RPM street fuel pumps are designed for use with all Edelbrock carburetors used in Performer or Performer RPM applications. These high performance street fuel pumps feature a high-quality, 3-stage polished finish. The unique valve design improves flow quantity and quality—and will support engines with up to 600 hp. The high-volume, 3/8 in. NPT inlet and outlets surpass the capacity of many other pumps. Performer RPM street fuel pumps produce 6 psi and do not require a regulator; and the clockable lower housing can be rotated for the best inlet and outlet alignment. They're designed for use with gasoline only.

4.32 out of 5 stars ( 433 )

$177.95

—

$190.95

Edelbrock Pro-Flo 4 EFI Systems

Edelbrock Pro-Flo 4 EFI systems provide you with a high performance traditional-style intake and 4150-style throttle body. Unlike regular throttle body EFI systems, Pro-Flo 4 features the fuel rails and individual injectors for each cylinder mounted on the manifold. This Edelbrock design produces the best fuel atomization and distribution for the ultimate performance, as well as delivering the most control and the most efficient way to deliver fuel to your engine. Along with innovative design, Pro-Flo 4 systems have the latest technology with an all-new ECU, and even more features for advanced tuning, with the key being their exclusive E-Tuner app with base calibrations developed on their dyno. Edelbrock Pro-Flo 4 EFI systems include and feature: * Engine Control Unit with faster processor and upgraded Bluetooth chip in a thinner waterproof design * Fully assembled intake manifold with air valve, fuel rails, and injectors * Fully assembled OEM high-quality wiring harness with pre-terminated connectors and labeled connection for a simplified installation * E-Tuner application for setup and engine monitoring * Wideband oxygen sensor * Distributor (not included with LS kits) * Gaskets and hardware * Installation instructions * Ready to run out of the box with pre-loaded calibrations * Self-learning technology--no tuning experience or laptop tuning required * Ignition control--adjust ignition curve with the E-Tuner 4 App for optimal performance and mpg * Offered with multiple fuel injector choices * Now boost compatible up to 15 psi by switching to a 2-bar MAP sensor and downloading the new firmware update from Edelbrock for free! It is recommended to regularly check for firmware updates even if not utilizing boost control. * Systems automatically compensate for altitude and weather changes * E-Tuner 4 app with Bluetooth connectivity between ECU and Android phone or tablet. Includes multiple dash display configurations for monitoring engine vitals and performance; multiple control functions including two adjustable cooling fan outputs, idle speed, AFR set points, acceleration fuel tuning, ignition control, cold start fuel, and cranking fuel.

4.11 out of 5 stars ( 127 )

$2,266.95

—

$2,762.95

Holley Sniper 2 EFI 650 HP Base Fuel Injection Systems with Power Distribution Module

Holley Sniper 2 EFI Base Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. New for Sniper 2 is the Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12 V source is all that's required to power the PDM and your Sniper EFI. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * For applications using a vehicle specific EFI conversion tank and fuel pump, or already having a fuel system capable of the required 55-65 psi, these systems are offered without a pump and fuel lines * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected

4.3 out of 5 stars ( 10 )

$1,999.95

—

$2,199.95

Fleece Performance LML CP3 Conversion Kits

Why convert your LML's fuel system from a CP4 to a CP3? Since its introduction, the CP4 has proven to be less reliable and less capable than the CP3 used in previous Duramax platforms—resulting in costly repairs for owners when a CP4 fails. You can improve your LML Duramax's reliability and fueling capability, as well as avoid costly failure with Fleece Performance LML CP3 conversion kits. They provide OEM fit-and-finish features, like Fleece's exclusive molded hoses for the fuel feed and return, high flow CP3 fuel fittings, and their valley feed line to support aftermarket lift pump applications. Fleece Performance LML CP3 conversion kits are offered with or without pump and the pump kits come in two different style pumps—a Bosch CP3 injection pump or Bosch CP3 pump with heavy-duty 10mm cam. Choose the kit that is right for you. All kits include: * CP3 to rail high pressure fuel line * High-flow CP3 feed and return fuel fittings * Preformed fuel feed and return fuel hoses * CP3 mounting adapter * Dosing injector distribution block, feed and return lines * FCA extension harness * Low pressure fuel feed line * Hardware kit

Not Yet Reviewed

$749.00

—

$2,599.00

Summit Racing™ Universal LS Fuel Filter Regulators

Summit Racing™ LS fuel filters with built-in regulator make it easy when getting more fuel to your engine. They are Corvette- style, 58 psi-rated fuel filter/regulators with a 5 nominal micron rating. The bypass design allows you to run one inlet with one outlet to the engine and a return outlet back to the tank. Summit Racing™ universal LS fuel filter regulators are ideal when performing a LS engine swap or any other fuel injection swap.

3.7 out of 5 stars ( 47 )

$34.99

—

$64.99

Injector Dynamics ID1050x Fuel Injectors

Injector Dynamics ID1050x fuel injectors are a built-to-spec motorsport injector, offering optimization of critical operating parameters important to you, the motorsport tuner. Built on the evolution of the ID1000 and X Series, these injectors are a drastic improvement over previous series from Injector Dynamics. Order the set recommended for your vehicle. Features include: * Requires only 8 V for consistent operation at 8 bar * Corrosion resistance makes them compatible with all automotive fuels * Compact bodies allow fitment in over 200 applications * Improved internal flow path—without sacrificing low flow performance * Stronger magnetic circuit offers stable operation up to 10 bar * Replaceable inlet filter extends service life

5.0 out of 5 stars ( 9 )

$999.99

—

$1,092.00

ACDelco GM Genuine Parts Fuel Injection Throttle Bodies

ACDelco GM Genuine Parts fuel injection throttle bodies are GM-recommended replacements for your vehicle's original component. It is located on the intake manifold, and contains the throttle plate(s) that control the air entering the engine. The throttle body also houses the fuel injector(s) on Throttle Body Injection (TBI) or Central Fuel Injection (CFI) systems. These true OE fuel injection throttle bodies have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

4.86 out of 5 stars ( 42 )

$86.99

—

$290.99

Quick Fuel Slayer Series Carburetors

Quick Fuel Slayer Series carburetors offer affordability, great looks, and impressive adjustability. Economical horsepower performance is not a dream! Quick Fuel Technology has engineered their Slayer Series of 600 cfm and 750 cfm street carburetors with everything you want at a price you need to fit your budget. Their hand-built quality and all-aluminum construction are outstanding—but consider these additional features: changeable idle air and high-speed air bleeds, 3-stage emulsion circuits, changeable primary idle feed and power valve restrictions, vacuum secondary adjustment screw, and unique secondary metering plate with changeable jets. Pursue horsepower and get more dollar power with the carburetors that let you tune "your way" and offer show-quality appeal—Quick Fuel Slayer Series carburetors.

4.62 out of 5 stars ( 226 )

$511.95

—

$562.95

Magnuson Magnum TVS2650 Supercharger Kits

Magnuson TVS2650 supercharger kits make power you can live with! Magnuson's powertrain integration technology offers you the ability to have big horsepower and drivability in the same supercharger. The TVS2650 system was developed to be a direct bolt on kit with minimal downtime, and straightforward installation. An enthusiast with basic tools can install the system in a weekend, or about a day for an experienced installer. The supercharger itself is maintenance free- pre-filled and sealed, nothing to check or top off for the lifetime of the engine. Magnuson only uses the highest quality components in their supercharger kits. Everything you need to supercharger your application is included, right down to detailed step-by-step installation instructions. Order yours today and unleash the power of a Magnuson Supercharger!

5.0 out of 5 stars ( 1 )

$7,395.00

—

$8,995.00

Chevrolet Performance EFI Intake Manifolds

Chevrolet Performance EFI intake manifolds are ideal stock replacements for your worn or faulty original. These multi-port injection models are made from factory-style materials to OE specifications—for a proper fit and flawless performance. Order the manifold recommended for your vehicle application.

5.0 out of 5 stars ( 1 )

$147.99

—

$1,745.14

Summit Racing™ Mechanical Fuel Pumps

Summit Racing™ mechanical fuel pumps are affordable replacements that deliver superior flow. They're available in two versions; one has 1/4 in. NPT inlets and outlets, provides 5.7 to 8 psi, and can free-flow 80 gph. That's twice what a normal pump delivers. The other has 3/8 in. NPT ports, delivers 6.5 to 8 psi, and can free-flow a hefty 110 gph. These pumps are offered in different finishes; and the lower housings of each unit can be rotated through 360 degrees for easy installation in tight spaces. Order the model recommended for your year/make and engine application.

4.02 out of 5 stars ( 524 )

$65.99

—

$81.99

Summit Racing™ Billet Throttle Bodies

Summit Racing™ billet throttle bodies are designed with larger openings (92mm or 102mm) to improve throttle response and provide maximum airflow. They're precision CNC-machined from billet aluminum and available in your choice of natural or black anodized finishes. Feed your LS engine the air it needs—and unleash its hidden horsepower! Order the Summit Racing™ replacement throttle body recommended for your vehicle.

4.83 out of 5 stars ( 29 )

$169.99

—

$180.99

On Sale

Summit Racing™ Cast Aluminum Intakes

Our Summit Racing™ cast aluminum intakes are the perfect performance upgrades for your engine. The dual plane carbureted manifolds feature a runner design to deliver improved power. They're available in a variety of sizes, RPM ranges, and finishes. Order the model recommended for your vehicle application.

3.72 out of 5 stars ( 50 )

$340.99

$184.99

—

$240.99

MSD Atomic AirForce Intake Manifolds

When you're serious about power for your LS or new LT1 engine, call in the AirForce! MSD Atomic AirForce intake manifolds have been designed using Computational Fluid Dynamic Modeling to create optimal plenum volume and efficient paths for improved airflow and distribution to stock and modified engines. Their unique bell-mouthed runner entrances maximize airflow and minimize shrouding--efficiently using the available plenum volume for an unobstructed flow path over opposing runners. The 2-piece molded polymer design resists heat soak, minimizes weight, and allows easy access to the runners for porting. MSD Atomic AirForce intake manifolds accept an OEM or 103mm throttle body, as well as stock, aftermarket, or Atomic LS EFI fuel rails. They are supplied with new gaskets and hardware for a direct bolt-on package. The 103mm throttle bore allows the use of large throttle bodies for greater airflow, and a direct-flow path runner design promotes maximum airflow.

3.58 out of 5 stars ( 19 )

$1,399.95

—

$1,699.95

On Sale

Holley Sniper OE Style 255 LPH EFI Fuel Pump Modules

Holley Sniper offers OE-style 255 lph EFI fuel pump modules for a wide range of vehicles, including many Chevy, Pontiac, Buick, Oldsmobile, GMC, Ford, Mercury, Jeep, Dodge and Plymouth cars and trucks from the 1950s, '60s, '70s, and '80s. These in-tank modules are high-pressure units that flow 255 liters per hour (LPH) and are capable of supporting electronic fuel injection (EFI) engines producing up to 550 hp. A pre-calibrated fuel level sending unit designed to work with the factory fuel gauge for this application is included. Each module also features a HydraMat filter which has a unique internal reservoir that keeps fuel available at the pick-up and also provides protection from contaminates. Fuel pressure is internally regulated to 58 psi, eliminating the added expense and effort of purchasing and installing an external fuel pressure regulator; no separate return line is required because these modules return excess fuel right inside the tank! The Holley Sniper EFI fuel pump module was designed as a direct replacement for your factory pick-up and sending unit. There's no need to purchase a custom EFI fuel tank. You can even retain the factory fuel hard line—just connect the outlet of the pump module to the hard line on your vehicle with EFI-rated fuel hose and hose clamps available in the Earls Vapor Guard line.

4.27 out of 5 stars ( 11 )

$439.95

$293.10

—

$538.95

Magnuson Magnum TVS2650R Supercharger Kits

Take your Z06 to the next level with Magnuson's TVS2650 Magnum Supercharger System! Built off of Magnuson's premium Magnum Performance Line, their Corvette Magnum System will give your engine an incredible 76 extra horsepower: 726 hp and 690 ft-lbs at the crank! The system has been designed to fit under the hood of a stock C7 Z06, all while featuring two massive charge air coolers for maximum cooling capability. At Magnuson, they only use the highest quality components in their supercharger kits. Everything you need to supercharge your Corvette is included, right down to detailed step-by-step installation instructions. Order yours today and unleash the power of a Magnum Supercharger on your Corvette!

5.0 out of 5 stars ( 1 )

$7,595.00