Availability
Showing In Stock Items. Show All 40 Items.
S&B Filters cotton filter cold air intake kits are designed to improve airflow and bring down the temperature of the air that enters your engine. To achieve more airflow, S&B oiled cotton filters are built with four layers (or eight for diesels) of the highest-quality cotton gauze. They use deeper, wider pleats with more per filter. Plus, their manufacturing process yields almost no "bleed", creating a greater open surface area. All of this adds up to more airflow with excellent protection. The filter elements are washable, reusable, and will protect your engine from harmful dirt and debris. Gain performance and a sporty, high-tech appearance under the hood of your rig with an assist from the S&B Filters cotton filter cold air intake kit best suited for your application. More product features, items, and specifications include: * Silicone rubber (not urethane) filters and couplers help ensure they won't degrade or crack, while resisting temperatures as high as 400 degrees F * Helps balance air/fuel ratios to improve gas mileage * Cross-linked intake tube minimizes restriction * Custom air box (where applicable, including some with clear lids) keeps loose dirt and turbulent underhood air out of your intake * Specific year, make, and model design makes them simple to install, with help from the easy-to-use installation instructions and illustrations * Included mounting hardware for replacing your stock assembly in 30 minutes or less in most cases
( 435 )
$349.00
Earl's Performance LS steam vent kits eliminate trapped air and steam from your engine to prevent hot spots and overheating. They offer a selection of these LS power plumbing kits, with the appropriate braided stainless steel Speed Flex hose with hose ends that make installation easier and much more attractive than OEM hard lines. Plus, they provide more flexibility when you're using aftermarket intakes and other accessories on performance vehicles. The kits are available in front and 4-corner plumbing options, with adjustable anodized aluminum steam vent adapters and/or distribution blocks. Plumb your LS for performance with Earl's steam vent kits.
( 5 )
$299.95
—
$349.95
Have you always wanted a cold air intake with a disposable filter--without sacrificing performance? S&B Filters dry filter cold air intake kits offer airflow comparable to their cotton filters with the same great protection. They typically last for 15,000 miles of highway driving and you can extend the life of the filter by blowing it out with compressed air (up to three times). Your rig will not only gain performance, but also a sporty high-tech appearance under the hood. In addition, the filters and couplers are made with silicone rubber, not urethane, to help ensure they won't degrade or crack and can resist temperatures as high as 400 degrees F. These intake kits are simple to install, and the great looking signature clear lid allows visual inspection of your filter at all times. Remember, there are good air intakes … and then there are the better intakes--demand the better; choose the efficiency and style of S&B Filters cold air intake kits. Features include: * Helps balance air/fuel ratios to improve gas mileage * Specially-crafted cross-linked intake tube minimizes restriction * Custom air box keeps loose dirt and turbulent underhood air out of your intake * Custom-made for your specific year, make, and model * Easy-to-use installation instructions and illustrations * With the included mounting hardware, replaces your stock tract in 30 minutes or less
( 58 )
$349.00
JET Powr-Flo throttle bodies are direct replacements for factory units, and can be used to replace a worn-out throttle body or to upgrade your existing throttle body. They provide increased airflow for improved throttle response by taking advantage of JET's unique inlet design, and they include all new pre-installed calibrated electronics to allow for a simple "remove and replace" installation. JET Powr-Flo throttle bodies increase air velocity to the intake manifold, improving throttle reaction and provide horsepower throughout the entire rpm range. Order the JET Powr-Flo throttle body compatible with your vehicle.
( 109 )
$389.96
Summit Bucks
ACDelco GM Genuine Parts fuel injection throttle bodies are GM-recommended replacements for your vehicle's original component. It is located on the intake manifold, and contains the throttle plate(s) that control the air entering the engine. The throttle body also houses the fuel injector(s) on Throttle Body Injection (TBI) or Central Fuel Injection (CFI) systems. These true OE fuel injection throttle bodies have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
( 40 )
$268.99
The next generation of air intakes is here! aFe Momentum GT Pro 5R air intake systems use the most up-to-date engineering tools and techniques to provide you with the perfect blend of power and protection. Their one-piece sealed housing with an auxiliary air scoop is designed to eliminate the use of multiple housings and ensure the coolest air intake charge available. A urethane plug is also included for those cold-weather applications where you want to block off the auxiliary air scoop. These systems feature premium stainless steel T-bolt clamps and a 2-ply, reinforced silicone coupler at the throttle body for increased strength and durability. They also include a 5-layer washable and reusable Pro 5R air filter. Experience maximum horsepower gains, huge low-end towing power, increased torque, and a throaty, mean growl for your performance machine with the Momentum GT Pro 5R air intake systems from aFe.
( 100 )
$420.00
FAST LSXR upper intake shells are constructed from advanced polymer material that offers a host of benefits over aluminum aftermarket intakes—including lighter weight, increased strength, and improved heat-dissipating characteristics. These replacement shells are compatible with FAST LSXR 102mm, LS, L99, L92, and L76 intake manifolds found on hundreds of vehicles. Order the model recommended for your application.
Not Yet Reviewed
$497.95
K&N 57 Series FIPK cold air intake kits are designed to eliminate air path restriction and deliver a massive amount of air into your engine, resulting in more power. These fuel injection performance kits are guaranteed to increase horsepower. They are engineered for specific vehicles to replace the OEM setup, including those with computer systems. The air filter element is washable and reusable, lasting up to 100,000 miles before service is required (driving conditions dependent). Where applicable, protective heat shields and hardware are included with installation designed to use factory holes and mounting points for easy installation. The air must flow—and it will when you order the K&N 57 Series FIPK cold air intake kit best suited for your application!
( 767 )
$367.99
Airaid SynthaMax Jr. cold air intake kits target the restrictive elements of factory intake systems—the intake tube and the paper filter—to boost horsepower and mileage. These kits feature Airaid's dry SynthaMax Direct Fit Premium replacement filters and modular intake tubes. As with other Airaid intake systems, Airaid Jr. kits help straighten and improve clean airflow to the engine for added throttle response with increased horsepower and torque. Each cold air intake kit is custom-built to fit specific vehicles, is easy to install, and requires no drilling. SynthaMax filters are washable, reusable, and fully backed by the Airaid no-hassle lifetime warranty. Order the model recommended for your application. Features include: * Dry SynthaMax replacement filter—recommended for everyday street driving * Helps boost horsepower and acceleration * Replaces stock air filter and intake tubing while retaining stock air box * High-airflow premium filter * Low-restriction polyethylene intake tube * Easy to install with little mechanical knowledge
( 41 )
$262.99
Nitrous Express 102mm LS nitrous plates bolt between the throttle body and intake, making installation quick and simple. The 4-bolt plates are also pre-machined with a second set of nitrous and fuel passages—so making the upgrade to a dual stage system is extremely easy by adding part number NX933D for a second stage. Order the plate model recommended for your year/make and engine application.
Not Yet Reviewed
$326.78
The next generation of air intakes is here! aFe Momentum GT Pro Dry S air intake systems use the most up-to-date engineering tools and techniques to provide you with the perfect blend of power and protection. Features and benefits of aFe Momentum GT Pro Dry S air intake systems include: * Custom, CAD-designed, roto-molded housing made from heat soak-resistant material--eliminates multiple components and ensures the coolest air intake charge possible * A large, clear sight window allows for filter inspection without removal of the air box * High-quality plastic, dyno-tuned intake tube for maximum power gains * Designed around the largest filter possible to allow optimum performance and filtration * Pro Dry S performance air filter features 3-layer, progressively finer porosity synthetic media--with a 100 percent polyurethane frame for long life and multiple cleaning cycles
( 65 )
$433.00
K&N 77 Series high-flow performance cold air intake kits are aftermarket air induction kits designed for trucks and sport utility vehicles. They include a free-flowing, mandrel-bent intake tube (various materials and color options) with a Million Mile Warranty. K&N 77 Series cold air intake kits replace your restrictive factory air filter and intake housing, maximizing your power and acceleration. They include a washable, reusable air filter and offer guaranteed performance for their vehicle applications.
( 478 )
$444.96
—
$472.99
Volant PowerCore air intakes feature a heat-resistant air box that's designed to keep hot engine compartment air out of your air intake stream, pulling cold air from down below. This gives you a cold, dense air charge that delivers maximum punch and power potential. These PowerCore intakes also include an air filter that's specifically designed to stop ultra-fine particles from harming your engine. Order the model designed for your vehicle application. Other features and benefits: * Increased horsepower and fuel economy * PowerCore air filter material can even get wet without harm * Maintenance-free; never needs cleaned or oiled * Aluminum air box lid adds style to your engine compartment
( 170 )
$389.90
The Nitrous Express LS 102mm plate conversions feature a billet nitrous plate that fits all LS engine series intakes. These plates bolt between the throttle body and intake, making installation quick, easy, and attractive. The plates are pre-machined with a second set of nitrous and fuel passages—so you can easily upgrade to a dual-stage system later on. Order the nitrous oxide plate recommended for your vehicle and engine application.
Not Yet Reviewed
$405.50
K&N DRYFLOW air intake systems replace your vehicle's restrictive factory air filter and air intake housing. These cold air kits are designed to dramatically reduce intake restriction as they smooth and straighten airflow, allowing your vehicle's engine to inhale a larger amount of air than the factory air filter assembly—and more air means more usable power and acceleration throughout the engine's rpm range. K&N's DRYFLOW kits feature an oil-free synthetic filter media providing increased airflow and exceptional engine protection, without requiring oil. Cooler, denser air gets directed through a custom intake tube into the engine's throttle body for a guaranteed power gain. K&N DRYFLOW cold air intake kits can typically be installed in less than 90 minutes with simple hand tools. Choose the kit designed for your vehicle. Benefits: * Filter only requires cleaning every 50,000 miles of normal highway driving conditions * K&N No-Hassle Lifetime Limited Warranty * Will not void vehicle warranty
( 6 )
$367.99
Eliminate your restrictive factory air box, filter, and intake tube. In their place, install one of the Volant MaxFlow 5 closed box air intake kits. They house a MaxFlow 5 oiled cotton gauze air filter that is cleanable and reusable. As an enclosed system, the air intake keeps your engine quiet at cruising speeds, but still allows it to roar to life when you stomp on the gas. This design protects the filter and ensures that colder air is pulled in from the fender instead of the engine bay—resulting in more horsepower and torque. These intake units are factory-tuned, and everything you need for installation is included. Volant MaxFlow 5 air intake kits are available for fitment on a variety of makes and models.
( 171 )
$351.90
K&N Blackhawk cold air intake kits not only look impressive under the hood, but they are also designed to improve airflow while providing outstanding filtration to protect your engine. The designs have undergone rigorous testing, and the resulting power and torque gains have been impressive. They feature lightweight aluminum tubing cut and shaped to precise specifications, surfaces are carefully hand worked to remove any rough edges or metal burrs, and a K&N engraved metal plate is welded in place. The tubes are then powdercoated with a durable flat black finish. The kits include a black DRYFLOW synthetic washable air filter with thick, low-restriction filter media, which protects the engine without the need for air filter oil. These assemblies include all the hardware necessary for an easy installation. The air must flow--and it will when you order the K&N Blackhawk with DRYFLOW cold air intakes best suited for your application!
( 268 )
$524.99
On Sale
NOS OEM fuel injection plates ensure a steady, precise metered flow of nitrous and fuel for reliability, backed with years of laboratory research and dyno and dragstrip testing. The injector plates are available for those who want to build their own system or upgrade their current nitrous system, without the expense of buying a new complete system. Unless specified, NOS injector plates incorporate a low-profile (1/2 in. thick) plate, and are constructed of solid billet or diecast aluminum with a durable black finish. Select the kit recommended for your engine application.
( 2 )
$349.95
aFe Quantum Pro 5R cold air intake systems are the latest in airflow technology. From the uniquely integrated filter-to-housing design, to the state-of-the-art lightweight injection-molded base and top Pro 5R filter, Quantum delivers dyno-proven performance gains, convenience, value—and installs in minutes. Order the model recommended for your vehicle and engine application. aFe Quantum Pro 5R systems include: * Quantum Pro 5R performance air filter * Dyno-tuned intake tube * Silicone bellows coupling * Necessary hardware * Filter housing * A hassle-free installation
( 1 )
$361.00
The "next generation of air intake technology" K&N 50 Series NextGen cold air intake kits are precisely engineered for your vehicle, enhancing the style of your engine bay while increasing horsepower, torque, and airflow. Every detail of the intake system is thoughtfully designed to deliver performance, plus make the installation process DIY-friendly. NextGen cold air intakes are dyno-tested to provide a guaranteed increase in horsepower and torque on your engine's stock tune, and they are back by K&N's 55+ years of engine protection. Enjoy the roar of your engine on acceleration without any drone at cruising speeds; select the K&N 50 Series NextGen cold air intake kit designed for your vehicle. NextGen CAI details: * High-density polyethylene (HDPE) rotationally molded tube helps increase the volume of airflow to your engine and provides an increase in horsepower and torque with no tune required * Custom NextGen hybrid air box design incorporates an enlarged factory fresh air inlet for more airflow and lower inlet air temperatures * Easy-view open top for quick filter access * Oversized performance high-flow air filter, washable and reuseable, provides added surface area to flow more air and hold more dirt * Quick Lock air filter technology allows the filter to snap into place, and a sealing bead secures the system with just one hose clamp * CAD-designed large diameter tube with integrated airflow channels force an increase in velocity of air into your engine
( 6 )
$399.99
The engineers at FAST teamed up with the airflow specialists at RHS to develop a 3-piece, polymer intake manifold. They are constructed from a proprietary advanced polymer material that offers a host of benefits over aluminum aftermarket intakes, including lighter weight and improved strength and heat dissipating characteristics. While they feature a 102mm air inlet that is perfectly suited to the FAST Big Mouth 102mm throttle body, they can also be used with stock or aftermarket 90mm or 92mm throttle bodies. Other features include integrated nitrous bungs and perfect bolt-on fitment that allows for the use of factory accessories without modifications or clearance concerns. FAST LSXR intake manifolds' 3-piece modular design allows for easy disassembly and porting. This new design gives you the ability to remove individual runners from the manifold for modification.
( 26 )
$450.95
Adding some extra horsepower to your engine, especially in racing applications, is often the job of a nitrous oxide system. Now you can quickly upgrade to a dual-stage package compatible with several Nitrous Express systems which are pre-machined with a second set of fuel and nitrous passages. These dual-stage kits allow you to boost power in stages to soften the punch of the nitrous, limiting excessive tire spin or violent chassis reaction. The Nitrous Express dual-stage upgrade for dual-stage throttle body plates kit includes: * Set of Lightning fuel and nitrous solenoids * Solenoid brackets * Billet Y fitting * Braided stainless steel lines * Plate fittings * Solenoid fittings and jetting for 50, 100, 150, 200, 250, 300, 350, and 400 hp
Not Yet Reviewed
$556.89
Ready to race? Nitrous Express LS plate conversion kits are an absolute "bang for the buck" power adder. You'll have the pills to jet, dyno tunes for each setting, and increased horsepower to the wheels. These kits feature billet plates with bolts to attach cleanly between the throttle body and intake. The conversion comes as a single-stage system; it includes jetting for multiple conversions, nitrous line, and rubber O-ring. You can trust Nitrous Express technology for the ultimate in atomization and distribution.
( 1 )
$405.50
aFe Magnum Force Stage 2 Pro Dry S air intake systems are designed to outflow and outperform your factory intake. Using durable, one-piece, 16-gauge powdercoated heat shields, these Stage 2 intakes feature aFe's Pro Dry S air filters that improve airflow for increased horsepower and torque. Magnum Force systems also utilize precision-designed, heat-insulating, roto-molded intake tubes that increase airflow with improved volumetric efficiency for maximum performance. With three layers of progressively finer mesh synthetic media between a 100 percent polyurethane top and base, Pro Dry S high-flow, oil-free, conical filters provide maximum convenience and easy maintenance with excellent airflow and 99.2 percent filter efficiency. Washable and reusable, their tall, open, evenly spaced pleats provide excellent dust-holding capacity for longer service cycles between cleanings. A pliable polyurethane flange with integrated bumps assures a tight, no-leak seal over the life of the filter. These air intake systems are also easy to install and maintain.
( 25 )
$395.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
