Availability
Turbosmart wastegate replacement components are designed to help you rebuild your wastegate. Over time, your wastegate takes a lot of abuse from heat and pressure and can begin to show wear and lose performance. When this happens, you do not have to replace it--you can rebuild it to work like new again. These Turbosmart replacement components are built to the same standards and specs as your original parts so that your fit and function will be like new again.
( 5 )
$12.95
Turbosmart Gen-V Race Port blow-off valves are small, lightweight, high performance components for forced-induction competition level engines. Featuring unique collar designs and internal flow structures, they are 46 to 50 percent lighter and 25 percent smaller than the competition, while flowing 330 cfm, making Turbosmart Gen-V Race Port blow-off valves the highest flowing BOVs of their type on the market. They are offered in several different anodized colors and versions to fit your race application. All are supplied with vacuum fittings, V-band assemblies, and installed springs. Additional features: * Billet 6000 Series aluminum construction * Quick-release V-band collar for ease of installation and removal * MIL-Spec hard-anodized valve guide and stem * High-temperature silicone Nomex® diaphragm * Twin 1/8 in. NPT pressure ports for convenient positioning * 2.0 in. inlet flows over 330 cfm * Collar secured cap for quick spring changes * Most Race Ports have blue spring rated -18 to -14 InHg installed * Female flange version available to suit other manufacturer's 50mm flanges (no weld-on fitting supplied) and is 46 percent lighter * HE (Hall Effect) sensor cap versions allow you to monitor blow-off valve position for diagnostic or tuning purposes * Supercharger-specific versions have a soft pink spring rated -4 InHg installed, so it can stay open at idle, when supercharger is still producing boost
( 2 )
$324.95
—
$534.95
Turbosmart StraightGate50 vacuum wastegates are zero-offset butterfly-style units that allow enormous flow and almost linear control, and unparalleled boost control throughout the entire operating range. These high-flowing wastegates are simple to use, and packed with performance, flow, and features. The zero-offset butterfly valves are subjected to exhaust drive pressure equally on both halves of the valve, which pivots centrally, resulting in a self-balanced valve against any drive pressure. This means less work is required to act against even the highest drive pressures, and a wider tuning window is possible, no matter how the valve is actuated. The increased flow is achieved through the efficiency of a straight-through valve versus a poppet-style valve where the exhaust gas must be turned 90 degrees by the valve. Turbosmart pneumatic StraightGate 50s are available in a boost-based pSG50 6 psi or vacuum-based pSG50v 6 InHg versions. Both pneumatics take the electronic eSG50 version and simplify control via a traditional boost-based or vacuum-based actuator. Select the one you prefer. Key features: * 50mm (1.97 in.) butterfly-style zero-offset valve * 383.9 CFM/10.87m3 per minute flow * Stainless steel (630) butterfly and shaft * Stainless steel (347) main body * Stainless steel, heat-treated 431, V-band clamps * 6262 T-6 anodized aluminum bracket and actuator * Turbosmart unique locking collar ring * Base spring options from 6 psi to 42 psi * Suitable for single or twin port boost-based control * Stainless steel (N60) linkages and control arm
Not Yet Reviewed
$729.95
Big Bubba Sleeper blow-off valves from Turbosmart have been designed for big horsepower, high performance, and high-boost turbo, as well as supercharger applications! They're constructed out of heavy-duty CNC billet aluminum with a hard anodized aluminum 2-piece piston. All Big Bubba Sleeper valves use the same inlet flange and V-Band clamp as the Turbosmart Race Port to make things easier. With their -4 AN threaded vacuum port, you're capable of having a variety of connection methods. Big Bubba Sleeper Valves from Turbosmart are big, bold, and in-your-face, all in one lightweight package!
Not Yet Reviewed
$435.95
—
$461.95
An all-new addition to the Turbosmart lineup is the fresh air Gen-V (Anti-Lag Valve (ALV40) for motorsport applications. They feature a 40mm valve diameter, a purpose-designed actuator housing—and multiple fittings for ease of fitment and fabrication. The anti-lag valve allows for incoming charged fresh air from the turbo to be diverted safely into the exhaust manifold pre-turbine wheel. With the throttle at low opening angles, this allows for safer spooling of the turbocharger—without the potentially damaging throttle-based late combustion anti-lag that can induce high engine stresses and break connecting rods. The ALV is a sealed twin chamber design, with the top port being the primary control port. The spring is designed to open under vacuum conditions to allow for the air to bypass into the exhaust manifold; while the lower chamber is for twin port control methods—to control the valve irrespective of manifold pressure. The shaft seal allows for leak-proof operation.
Not Yet Reviewed
$529.95
Attention--use Turbosmart e-Boost Street boost controllers with extreme confidence! These no-nonsense electronic controllers offer track-proven technology to achieve the results that you want from your street machine. Turbosmart e-Boost Street controllers feature 40 psi max boost operating pressure, two boost settings, a boost correction factor, auxiliary output, and an easy-to-read, 3-segment display with adjustable brightness and a flash warning. You control the set point, gate pressure, and sensitivity to afford the boldest performance from your street-tuned car. Install the track-trusted, street-ready reliability and performance of Turbosmart e-Boost Street boost controllers.
( 4 )
$359.95
Turbosmart Kompact dual port blow-off valves offer high performance, OEM fitment, versatility, and affordability—in other words, everything you need! These BOVs feature dual ports that vent into both the atmosphere and the air intake, reducing turbo lag and eliminating cavitation. Turbosmart Kompact dual port blow-off valves are designed to be bolt-on replacements for plastic factory Bosch or Denso units. They use sequential timing to allow for quieter operation during normal driving, while still providing the benefits of a vent-to-atmosphere type BOV under race conditions. They are easily converted into full atmospheric or full bypass units by using the included port blanking plug.
( 28 )
$303.95
The Power Port is Turbosmart's largest and highest flowing blow-off valve ever, resetting the flow benchmark set by their popular and highly regarded Race Port blow-off valves. They are designed to be as light as possible, to keep vehicle weight down. The Power Port BOVs have a cutting-edge dual-chamber design, meaning they can be held open with the use of a solenoid to aid turbo response and control, during staging to give the best possible launch.
Not Yet Reviewed
$519.95
Turbosmart fuel pressure regulators ensure maximum precision with smooth fuel pressure delivery. Manufactured from billet aluminum that's anodized, these hand-assembled Turbosmart regulators provide a stable 1:1 ratio between fuel and manifold pressure. The regulators feature an easy screw and lock adjustment and work well with mechanical and electric fuel pumps. Several models are available for race cars with up to 3,000 hp fuel systems (FPR-3000) and modified street cars with up to 800 hp fuel systems (FPR-800) using a fuel pump. If you've installed fuel injectors or a high-flow fuel pump, or you're trying to maximize your standard fuel system for the extra power mods you've added, these regulators are ideal. Maintaining constant fuel pressure under all conditions from idle to full throttle is the function of Turbosmart fuel pressure regulators.
( 1 )
$235.95
—
$256.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
