Availability
Turbosmart blow-off valve springs are made of stainless steel and come in multiple colors. The replacement springs are available in a large selection to fit Turbosmart BOVs. If you're looking to improve the performance of your turbocharged car, no one can help make those improvements better than Turbosmart.
( 4 )
$22.95
—
$38.95
What's your boost level? Turbosmart wastegate springs are color-coded for the psi and diameter that you need to obtain your boost range. They offer inner, middle, and outer springs for all of their external wastegates. So, set the boost you want to run with springs specifically designed for your wastegates--Turbosmart wastegate springs.
( 13 )
$36.95
—
$80.95
Turbosmart Ultra-Gate 38 wastegates are small and light, but offer maximum flow. These 38mm external wastegates feature a unique locking collar design for quicker spring changes, along with a one-piece stainless steel valve.
( 4 )
$333.16
—
$372.95
Turbosmart StraightGate50 vacuum wastegates are zero-offset butterfly-style units that allow enormous flow and almost linear control, and unparalleled boost control throughout the entire operating range. These high-flowing wastegates are simple to use, and packed with performance, flow, and features. The zero-offset butterfly valves are subjected to exhaust drive pressure equally on both halves of the valve, which pivots centrally, resulting in a self-balanced valve against any drive pressure. This means less work is required to act against even the highest drive pressures, and a wider tuning window is possible, no matter how the valve is actuated. The increased flow is achieved through the efficiency of a straight-through valve versus a poppet-style valve where the exhaust gas must be turned 90 degrees by the valve. Turbosmart pneumatic StraightGate 50s are available in a boost-based pSG50 6 psi or vacuum-based pSG50v 6 InHg versions. Both pneumatics take the electronic eSG50 version and simplify control via a traditional boost-based or vacuum-based actuator. Select the one you prefer. Key features: * 50mm (1.97 in.) butterfly-style zero-offset valve * 383.9 CFM/10.87m3 per minute flow * Stainless steel (630) butterfly and shaft * Stainless steel (347) main body * Stainless steel, heat-treated 431, V-band clamps * 6262 T-6 anodized aluminum bracket and actuator * Turbosmart unique locking collar ring * Base spring options from 6 psi to 42 psi * Suitable for single or twin port boost-based control * Stainless steel (N60) linkages and control arm
Not Yet Reviewed
$637.41
Turbosmart internal wastegate actuators provide better turbo response and sensitivity, while managing boost pressure. They're packed with features that make them more convenient and reliable than other wastegate actuators. The Nomex-reinforced silicone diaphragm can withstand high temperatures associated with turbochargers without fear of failure. Their aluminum construction is strong and lightweight, while their stainless steel rod and clevis prevent corrosion under harsh elements. To top off these great little packages, Turbosmart designed a locking collar that allows for quick spring changes. Combine these internal wastegate actuators with Turbosmart's boost controller to really fine-tune your car's potential. Order the universal or application-specific model that best suits your vehicle.
( 6 )
$170.39
—
$540.95
Turbosmart Gen-V Race Port blow-off valves are small, lightweight, high performance components for forced-induction competition level engines. Featuring unique collar designs and internal flow structures, they are 46 to 50 percent lighter and 25 percent smaller than the competition, while flowing 330 cfm, making Turbosmart Gen-V Race Port blow-off valves the highest flowing BOVs of their type on the market. They are offered in several different anodized colors and versions to fit your race application. All are supplied with vacuum fittings, V-band assemblies, and installed springs. Additional features: * Billet 6000 Series aluminum construction * Quick-release V-band collar for ease of installation and removal * MIL-Spec hard-anodized valve guide and stem * High-temperature silicone Nomex® diaphragm * Twin 1/8 in. NPT pressure ports for convenient positioning * 2.0 in. inlet flows over 330 cfm * Collar secured cap for quick spring changes * Most Race Ports have blue spring rated -18 to -14 InHg installed * Female flange version available to suit other manufacturer's 50mm flanges (no weld-on fitting supplied) and is 46 percent lighter * HE (Hall Effect) sensor cap versions allow you to monitor blow-off valve position for diagnostic or tuning purposes * Supercharger-specific versions have a soft pink spring rated -4 InHg installed, so it can stay open at idle, when supercharger is still producing boost
( 2 )
$324.95
—
$534.95
Turbosmart Gen-V WG50 Pro-Gate external wastegates are cost-effective, high-performing 50mm units. They provide extensive user configurability, world-leading extended thermal performance, fatigue resistance and best-in-class flow performance for optimum control and longevity. A direct-fit upgrade to all 4th-generation Turbosmart wastegates, the Gen-V features a unique collar-locking system, variable actuator cap and base, strap-type V-band clamps, liquid-cooling, 1/8 in. NPT ports—and provides a range of springs.
Not Yet Reviewed
$555.95
—
$561.95
Turbosmart Hyper-Gate 45 wastegates offer maximum flow in a small package. These 45mm wastegates feature a unique locking collar design for a reduced size and quicker spring changes. Turbosmart Hyper-Gate 45 wastegates are suitable for medium-large capacity street and race engines with medium-frame turbocharger systems.
( 3 )
$429.95
Turbosmart Gen-V WG60CG Pro-Gate compressed gas wastegates are cost-effective, high-performing 60mm units. They're designed for control strategies that actively bias the top chamber with high pressure for large boost bandwidth operation, such as CO2 drag racing or compressed-air WRC applications. A direct-fit upgrade to all 4th-generation Turbosmart wastegates, they feature a unique collar-locking system, variable actuator cap and base, strap-type V-band clamps, optional liquid cooling, 1/8 in. NPT ports—and provide a range of springs. Turbosmart Gen-V WG60CG Pro-Gate compressed gas wastegates are engineered to win!
Not Yet Reviewed
$739.95
Turbosmart's much anticipated Gen-V electronic wastegates are available in Hyper-Gate (45mm, 120 psi) and Power-Gate (60mm, 80 psi) models. The Gen-V external line introduced modular architecture, allowing a rotatable diaphragm housing, optional water cooling, and the ability to swap actuator housings between gate sizes. These new models offer all the flow and interchangeability—with the kind of control never seen before, independent of any reference signal, without the need for compressed gas or boost lines. They're fully adjustable from your tuning interface; no need for changing springs. Boost control is completely adjustable from your laptop. As boost control strategies become more complex, Turbosmart engineers wanted a solution that maintains all the performance and reliability of the Gen-V range—and adds truly infinite control. These electrical wastegates operate on a current draw while providing fast and efficient boost control against up to 80 psi drive pressure (for the eWG60) and over 120 psi (for the eWG45). As with the Gen-V range, there is a provision for optional water cooling. Order the Gen-V model that best suits your performance needs.
Not Yet Reviewed
$1,306.95
Turbosmart Gen-V Hyper-Gate 45 Lite mechanical wastegates are cost effective, high performing 45mm external wastegates with a compact actuator for use in engine bays with limited space. The Gen-V provides extensive user configuration, world leading extended thermal performance, fatigue resistance, and best-in-class flow performance for optimum control and longevity. Turbosmart's Gen-V Hyper-Gate 45s have stainless steel bodies with black aluminum tops and are also offered in their Sleeper Series, providing a stealth appearance that goes black-on-black for those wanting a unique look under the hood, wish to keep a low-profile, or just want some limited-edition cred. All styles are direct-fit upgrades to all 4th-generation Turbosmart wastegates and feature Turbosmart's unique collar-locking system, variable actuator cap and base, strap-type V-band clamps, liquid-cooling, 1/8 in. NPT ports, and are provided with a range of 17/7 PH stainless steel springs. Choose the model best suited to your needs.
Not Yet Reviewed
$413.27
—
$461.95
Turbosmart Gen-V WG50CG Pro-Gate compressed gas wastegates are cost-effective, high-performing 50mm units. They're designed for control strategies that actively bias the top chamber with high pressure for large boost bandwidth operation, such as CO2 drag racing or compressed-air WRC applications. A direct-fit upgrade to all 4th-generation Turbosmart wastegates, they feature a unique collar-locking system, variable actuator cap and base, strap-type V-band clamps, optional liquid cooling, 1/8 in. NPT ports—and provide a range of springs. Turbosmart Gen-V WG50CG Pro-Gate compressed gas wastegates are engineered to win!
Not Yet Reviewed
$587.95
Turbosmart Comp-Gate 40 wastegates are a suitable choice for all street and race turbocharged vehicles with an external wastegate turbo system. These wastegates are designed to fit into tight engine bays, while still offering superior flow and heat-handling capabilities. Turbosmart Comp-Gate 40 wastegates feature a revolutionary actuator housing that allows for easy spring changes and gives you the ability to index the cap orientation in 12 different positions.
( 6 )
$345.95
—
$403.95
Turbosmart's much anticipated Gen-V electronic wastegates are available in Hyper-Gate (45mm, 120 psi) and Power-Gate (60mm, 80 psi) models. The Gen-V external line introduced modular architecture, allowing a rotatable diaphragm housing, optional water cooling, and the ability to swap actuator housings between gate sizes. These new models offer all the flow and interchangeability—with the kind of control never seen before, independent of any reference signal, without the need for compressed gas or boost lines. They're fully adjustable from your tuning interface; no need for changing springs. Boost control is completely adjustable from your laptop. As boost control strategies become more complex, Turbosmart engineers wanted a solution that maintains all the performance and reliability of the Gen-V range—and adds truly infinite control. These electrical wastegates operate on a current draw while providing fast and efficient boost control against up to 80 psi drive pressure (for the eWG60) and over 120 psi (for the eWG45). As with the Gen-V range, there is a provision for optional water cooling. Order the Gen-V model that best suits your performance needs.
Not Yet Reviewed
$887.96
Turbosmart Gen-V Hyper-Gate 45CG (Compressed Gas) mechanical wastegates are designed for control strategies that actively bias the top chamber with high pressure for large boost bandwidth operation, such as CO2 drag racing or compressed air WRC applications. The 45CGs feature an inverted diaphragm to maximize diaphragm life from high-pressure CO2 or compressed air systems. Turbosmart Gen-Vs provide extensive user configurability, world-leading extended thermal performance, fatigue resistance, and best-in-class flow performance for optimum control and longevity. A direct-fit upgrade to all Gen4 Turbosmart wastegates, the Gen-Vs feature the unique collar-locking system, variable actuator cap and base for easy, 360-degree optional routing of reference hoses, strap-type V-band clamps, optional liquid-cooling provision, 1/8 in. NPT reference ports, and are provided with the full range of available springs. Additional features: * Nitronic 60 valve guide and high-temperature 347 stainless steel body * 17/7 PH stainless steel springs * Liquid actuator cooling option * User adjustable actuator position * Modular design for actuator interchangeability
Not Yet Reviewed
$458.44
Turbosmart Gen-V HP (high-pressure) comp-gate external wastegates feature a new unique appearance, Gen-V architecture, more options, and more boost. Upgrades include their modularity, improved thermal management, water cooling options, and even more gate flow than ever before. Turbosmart answered the needs of the diesel tuning community years ago with their HP wastegate range. These Gen-V units take all the advances in design and entineering—such as water cooling, rotating housing, industry-leading gate flow, and 1/8 NPT reference ports—and pushes the results to new heights. The new Gen-V HP springs options alone mean as much as 50 psi of base spring pressure. Included in the box is the new Gen-V HP mechanical wastegate with 35 psi worth of pre-loaded springs (10 psi inner and 25 psi outer), all inlet and outlet weld flanges, valve seat and clamps, and basic reference port fittings needed to get set up and running. These wastegates are available in different external relief diameters.
Not Yet Reviewed
$507.02
—
$634.95
Turbosmart Gen-V Pro-Gate electronic wastegates feature a Gen-V wastegate body, so you can be confident the mounting orientation will match your existing manifold and outlet hardware. Built on the successful class leading Gen-V Comp-Gate 50 architecture, these units have stellar flow capacity and heat handling characteristics, as well as unparalleled control. There are no springs or hoses and no boost reference signal, nor any of the limitations associated with any of them. Gone are minimum boost levels associated with base spring pressure or heat related issues with hoses. If your manifold priority is good enough, you can set your boost anywhere from zero up to "all of it" from a laptop or tuning interface. Additional features: * Aluminum and cast stainless steel construction * Black anodized finish on top cap * Nitronic 40 valve guide and high-temperature 347 SS body * Liquid cooled, electronic actuator * Strap-type V-band clamps * 1/8 in. NPT * User adjustable actuator position * Onboard analog 0-5 V wastegate position sensor * Onboard analog 0-5 V actuator temperature sensor
Not Yet Reviewed
$1,128.95
Turbosmart Gen-V WG60 Power-Gate wastegates are cost-effective, high-performing 60mm units. They provide extensive user configurability, world-leading extended thermal performance, fatigue resistance, and best-in-class flow performance for optimum control and longevity. A direct-fit upgrade to all 4th-generation Turbosmart wastegates, they feature a unique collar-locking system, variable actuator cap and base, strap-type V-band clamps, liquid-cooling, 1/8 in. NPT ports—and provide a range of springs. Turbosmart Gen-V WG60 Power-Gate wastegates are engineered to win!
Not Yet Reviewed
$708.95
—
$713.95
Turbosmart Gen-V Comp-Gate electronic wastegates are built on the successful, class leading Gen-V Comp-Gate 40 architecture. Starting with a Turbosmart Gen-V wastegate body, you can be confident the mounting orientation will match your existing manifold and outlet hardware. The Gen-V Comp-Gate 40 already had class leading flow capacity and heat handling characteristics. There are no springs, no hoses and no boost reference signal, nor any of the limitations associated with any of them. Gone, are minimum boost levels associated with base spring pressure or the heat related issues with hoses. If your manifold priority is good enough, you can set boost anywhere from zero up to "all of it" from your laptop or tuning interface. Additional features: * Aluminum and cast stainless steel construction * Black anodized finish on top cap * Nitronic 40 valve guide and high-temperature 347 SS body * Liquid cooled, electronic actuator * Strap-type V-band clamps * 1/8 in. NPT * User adjustable actuator position * Onboard analog 0-5 V wastegate position sensor * Onboard analog 0-5 V actuator temperature sensor
Not Yet Reviewed
$981.95
Turbosmart is synonymous with compact, light wastegates to regulate the maximum boost pressure in turbocharger systems. Now, the company introduces Ultra-Gate 38HP, the highest pressure external wastegates of their kind in the world! These valve units retain Turbosmart's trademark attributes and are ideal for all high-PSI turbo diesel and drag racing applications. Ultra-Gate 38HPs are specifically designed for classic two-bolt flanges (71mm spacing). Features include a one-piece valve base, a locking collar to easily change springs, and the proven silicon Nomex diaphragm.
Not Yet Reviewed
$519.95
An all-new addition to the Turbosmart lineup is the fresh air Gen-V (Anti-Lag Valve (ALV40) for motorsport applications. They feature a 40mm valve diameter, a purpose-designed actuator housing—and multiple fittings for ease of fitment and fabrication. The anti-lag valve allows for incoming charged fresh air from the turbo to be diverted safely into the exhaust manifold pre-turbine wheel. With the throttle at low opening angles, this allows for safer spooling of the turbocharger—without the potentially damaging throttle-based late combustion anti-lag that can induce high engine stresses and break connecting rods. The ALV is a sealed twin chamber design, with the top port being the primary control port. The spring is designed to open under vacuum conditions to allow for the air to bypass into the exhaust manifold; while the lower chamber is for twin port control methods—to control the valve irrespective of manifold pressure. The shaft seal allows for leak-proof operation.
Not Yet Reviewed
$529.95
These Turbosmart wastegate diaphragms are designed to keep your wastegate operating efficiently and effectively. They are manufactured from quality materials and are designed to fit your Turbosmart wastegate.
Not Yet Reviewed
$104.95
Turbosmart Power-Gate 60 wastegates outperform other wastegates in their class with a superior flow path and high temperature resistance. These 60mm external units feature a solid, one-piece coated stainless steel valve, and a shielded diaphragm housing that ensures excellent heat-handling capabilities. They're available with a range of setups and base pressures to suit your needs. Power-Gate 60 wastegates are ideal for extreme performance turbocharged engines with external wastegate turbo systems.
Not Yet Reviewed
$708.95
Turbosmart Gen-V Hyper-Gate mechanical wastegates are a direct-fit upgrade to all 4th-generation Turbosmart wastegates. Gen-V models feature a unique collar-locking system, rotatable actuator, strap-type V-band clamps, 1/8 in. NPT ports, and optional liquid cooling. The units are built with a cast stainless steel housing, aluminum top, and anodized finish—for a great-looking wastegate under any hood!
Not Yet Reviewed
$466.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
